Omigo SL Advanced Bidet Seat (1309)

Full Features Your wash, your way adjustable, 5-position stainless steel nozzle fully adjustable water temperature and pressure heated seat with 3 temperature levels and on/off option 4 wash modes: pulse, gentle, strong, and nozzle oscillation Features you'll love illuminating LED nightlight with on/off option internal water heater tank provides full 2-minute warm water wash gentle-close, sit-upon bidet seat and lid with easy, quick-release seat removal intuitive side-arm controls built-in seat safety sensor requires skin contact to operate bidet Hygienic retractable nozzles aerated water for a soft and comfortable wash wide and concentrated spray settings self-cleaning nozzle cycle runs before and after each use nozzles retract while not in use Wipe less, wash more optional eco mode reduces energy usage a sustainable alternative to toilet paper and flushable wipes switching to a bidet saves trees, water, and energy simple, DIY installation on your existing toilet UPC certified by IAPMO and cETL approved 1-year limited warranty OmigoGS FAQs. Is the water OmigoGS uses clean? Yes! It is the same clean water used for your sink and shower. Fresh water is accessed using a T-Valve that brings it directly to your OmigoGS for a perfectly fresh wash. How do I clean my OmigoGS? Simply unplug your bidet seat and use mild detergents as you would your normal toilet seat. There is a quick release button so you can easily pop it off for an occasional deeper clean. Do I need a plumber to install my OmigoGS? Nope! You can DIY this install in about 20 minutes. We have a step-by-step video as well as detailed instructions online or in your bidet seat manual. How is OmigoGS powered? OmigoGS has a 3.9-foot power cord to access your average bathroom GFCI outlet. Don’t have an outlet nearby? Use a properly rated (15 amp GFCI) extension cord. Will this fit my round or one-piece toilet? OmigoGS is designed to fit most US toilets and comes in two different sizes—round and elongated. Installation Useful Resources Owner's Manual Not up to installing it yourself? Task Rabbit is an American online and mobile marketplace that matches freelance labor with local demand, allowing consumers to find immediate help with everyday tasks. Learn more Installation so easy, anyone can do it. OmigoGS has all the parts and hardware for a standard installation. Step 1: Prep your toilet. remove the seat and clean the bowl shut off the water valve and flush the toilet detach the metal hose from toilet tank fill valve Step 2: Connect the fresh water supply. screw the T-Valve onto the fill valve attach the metal hose to the bottom of the T-Valve attach the bidet hose to the middle of the T-Valve Step 3: Install the mounting hardware. place the mounting plate set in the adjustable brackets secure with the screws and washers Step 4: Attach your OmigoGS. slide on your OmigoGS until it clicks attach the water line and turn on the water valve check for leaks then plug into your GFCI outlet start washing! Specs & Documents Power Voltage / Frequency 120 V / 60 Hz Max Power Consumption 870 W Power Cord Length 3.9 ft Safety Devices Thermostat, Thermal Fuse, Temperature Sensor, Seat Occupied Sensor Seat Weight Limit 330 lb / 149.68 kg Lid Weight Limit 160 lb / 72.57 kg Seat Temperature 4 Levels: OFF - Room Temp; Low - 93.2°F / 34°C ; Medium - 100.4°F / 38°C; High - 107.6°F / 108°C. Water Temperature Control 4 Levels: OFF - Ambient Water Temp; Low - 91.4°F / 33°C Medium - 96.8°F / 36°C; High - 102.2°F / 39°C Standard Wash Time 2 Minutes Nightlight Blue LED Dimensions Elongated: 18.5”(W) x 20.7”(L) x 5.7”(H) Round: 18.5”(W) x 19.55”(L) x 5.7”(H) Weight Elongated: 11.24 lb / 5.1 kg Round: 10.8 lb / 4.1 kg Warranty 1-Year Limited Warranty California Prop 65 WARNING WARNING: This product has parts that contain lead, known in the State of California to cause cancer & reproductive harm. Wash hands well after handling installation parts.

Full Features Your wash, your way adjustable, 5-position stainless steel nozzle fully adjustable water temperature and pressure heated seat with 3 temperature levels and on/off option 4 wash modes: pulse, gentle, strong, and nozzle oscillation Features you'll love illuminating LED nightlight with on/off option internal water heater tank provides full 2-minute warm water wash gentle-close, sit-upon bidet seat and lid with easy, quick-release seat removal intuitive side-arm controls built-in seat safety sensor requires skin contact to operate bidet Hygienic retractable nozzles aerated water for a soft and comfortable wash wide and concentrated spray settings self-cleaning nozzle cycle runs before and after each use nozzles retract while not in use Wipe less, wash more optional eco mode reduces energy usage a sustainable alternative to toilet paper and flushable wipes switching to a bidet saves trees, water, and energy simple, DIY installation on your existing toilet UPC certified by IAPMO and cETL approved 1-year limited warranty OmigoGS FAQs. Is the water OmigoGS uses clean? Yes! It is the same clean water used for your sink and shower. Fresh water is accessed using a T-Valve that brings it directly to your OmigoGS for a perfectly fresh wash. How do I clean my OmigoGS? Simply unplug your bidet seat and use mild detergents as you would your normal toilet seat. There is a quick release button so you can easily pop it off for an occasional deeper clean. Do I need a plumber to install my OmigoGS? Nope! You can DIY this install in about 20 minutes. We have a step-by-step video as well as detailed instructions online or in your bidet seat manual. How is OmigoGS powered? OmigoGS has a 3.9-foot power cord to access your average bathroom GFCI outlet. Don’t have an outlet nearby? Use a properly rated (15 amp GFCI) extension cord. Will this fit my round or one-piece toilet? OmigoGS is designed to fit most US toilets and comes in two different sizes—round and elongated. Installation Useful Resources Owner's Manual Not up to installing it yourself? Task Rabbit is an American online and mobile marketplace that matches freelance labor with local demand, allowing consumers to find immediate help with everyday tasks. Learn more Installation so easy, anyone can do it. OmigoGS has all the parts and hardware for a standard installation. Step 1: Prep your toilet. remove the seat and clean the bowl shut off the water valve and flush the toilet detach the metal hose from toilet tank fill valve Step 2: Connect the fresh water supply. screw the T-Valve onto the fill valve attach the metal hose to the bottom of the T-Valve attach the bidet hose to the middle of the T-Valve Step 3: Install the mounting hardware. place the mounting plate set in the adjustable brackets secure with the screws and washers Step 4: Attach your OmigoGS. slide on your OmigoGS until it clicks attach the water line and turn on the water valve check for leaks then plug into your GFCI outlet start washing! Specs & Documents Power Voltage / Frequency 120 V / 60 Hz Max Power Consumption 870 W Power Cord Length 3.9 ft Safety Devices Thermostat, Thermal Fuse, Temperature Sensor, Seat Occupied Sensor Seat Weight Limit 330 lb / 149.68 kg Lid Weight Limit 160 lb / 72.57 kg Seat Temperature 4 Levels: OFF - Room Temp; Low - 93.2°F / 34°C ; Medium - 100.4°F / 38°C; High - 107.6°F / 108°C. Water Temperature Control 4 Levels: OFF - Ambient Water Temp; Low - 91.4°F / 33°C Medium - 96.8°F / 36°C; High - 102.2°F / 39°C Standard Wash Time 2 Minutes Nightlight Blue LED Dimensions Elongated: 18.5”(W) x 20.7”(L) x 5.7”(H) Round: 18.5”(W) x 19.55”(L) x 5.7”(H) Weight Elongated: 11.24 lb / 5.1 kg Round: 10.8 lb / 4.1 kg Warranty 1-Year Limited Warranty California Prop 65 WARNING WARNING: This product has parts that contain lead, known in the State of California to cause cancer & reproductive harm. Wash hands well after handling installation parts.

Full Features Your wash, your way adjustable, 5-position stainless steel nozzle fully adjustable water temperature and pressure heated seat with 3 temperature levels and on/off option 4 wash modes: pulse, gentle, strong, and nozzle oscillation Features you'll love illuminating LED nightlight with on/off option internal water heater tank provides full 2-minute warm water wash gentle-close, sit-upon bidet seat and lid with easy, quick-release seat removal intuitive side-arm controls built-in seat safety sensor requires skin contact to operate bidet Hygienic retractable nozzles aerated water for a soft and comfortable wash wide and concentrated spray settings self-cleaning nozzle cycle runs before and after each use nozzles retract while not in use Wipe less, wash more optional eco mode reduces energy usage a sustainable alternative to toilet paper and flushable wipes switching to a bidet saves trees, water, and energy simple, DIY installation on your existing toilet UPC certified by IAPMO and cETL approved 1-year limited warranty OmigoGS FAQs. Is the water OmigoGS uses clean? Yes! It is the same clean water used for your sink and shower. Fresh water is accessed using a T-Valve that brings it directly to your OmigoGS for a perfectly fresh wash. How do I clean my OmigoGS? Simply unplug your bidet seat and use mild detergents as you would your normal toilet seat. There is a quick release button so you can easily pop it off for an occasional deeper clean. Do I need a plumber to install my OmigoGS? Nope! You can DIY this install in about 20 minutes. We have a step-by-step video as well as detailed instructions online or in your bidet seat manual. How is OmigoGS powered? OmigoGS has a 3.9-foot power cord to access your average bathroom GFCI outlet. Don’t have an outlet nearby? Use a properly rated (15 amp GFCI) extension cord. Will this fit my round or one-piece toilet? OmigoGS is designed to fit most US toilets and comes in two different sizes—round and elongated. Installation Useful Resources Owner's Manual Not up to installing it yourself? Task Rabbit is an American online and mobile marketplace that matches freelance labor with local demand, allowing consumers to find immediate help with everyday tasks. Learn more Installation so easy, anyone can do it. OmigoGS has all the parts and hardware for a standard installation. Step 1: Prep your toilet. remove the seat and clean the bowl shut off the water valve and flush the toilet detach the metal hose from toilet tank fill valve Step 2: Connect the fresh water supply. screw the T-Valve onto the fill valve attach the metal hose to the bottom of the T-Valve attach the bidet hose to the middle of the T-Valve Step 3: Install the mounting hardware. place the mounting plate set in the adjustable brackets secure with the screws and washers Step 4: Attach your OmigoGS. slide on your OmigoGS until it clicks attach the water line and turn on the water valve check for leaks then plug into your GFCI outlet start washing! Specs & Documents Power Voltage / Frequency 120 V / 60 Hz Max Power Consumption 870 W Power Cord Length 3.9 ft Safety Devices Thermostat, Thermal Fuse, Temperature Sensor, Seat Occupied Sensor Seat Weight Limit 330 lb / 149.68 kg Lid Weight Limit 160 lb / 72.57 kg Seat Temperature 4 Levels: OFF - Room Temp; Low - 93.2°F / 34°C ; Medium - 100.4°F / 38°C; High - 107.6°F / 108°C. Water Temperature Control 4 Levels: OFF - Ambient Water Temp; Low - 91.4°F / 33°C Medium - 96.8°F / 36°C; High - 102.2°F / 39°C Standard Wash Time 2 Minutes Nightlight Blue LED Dimensions Elongated: 18.5”(W) x 20.7”(L) x 5.7”(H) Round: 18.5”(W) x 19.55”(L) x 5.7”(H) Weight Elongated: 11.24 lb / 5.1 kg Round: 10.8 lb / 4.1 kg Warranty 1-Year Limited Warranty California Prop 65 WARNING WARNING: This product has parts that contain lead, known in the State of California to cause cancer & reproductive harm. Wash hands well after handling installation parts.

Full Features Your wash, your way adjustable, 7-position stainless steel nozzle fully adjustable water temperature and pressure heated seat with 3 temperature levels and on/off option Features you'll love illuminating LED nightlight with on/off option instant ceramic water heater provides endless warm water gentle-close, sit-upon bidet seat and lid with easy, quick-release seat removal wireless remote control with batteries and wall mount programmable user settings built-in seat safety sensor requires skin contact to operate bidet Hygienic retractable nozzles separate front and rear nozzles aerated water for a soft and comfortable wash wide and concentrated spray settings self-cleaning nozzle cycle runs before and after each use nozzles retract while not in use Wipe less, wash more optional eco mode reduces energy usage a sustainable alternative to toilet paper and flushable wipes switching to a bidet saves trees, water, and energy simple, DIY installation on your existing toilet UPC certified by IAPMO and cETL approved 1-year limited warranty OmigoSL FAQs. Is the water OmigoSL uses clean? Yes! It is the same clean water used for your sink and shower. Fresh water is accessed using a T-Valve that brings it directly to your OmigoSL for a perfectly fresh wash. How do I clean my OmigoSL? Simply unplug your bidet seat and use mild detergents as you would your normal toilet seat. There is a quick release button so you can easily pop it off for an occasional deeper clean. Do I need a plumber to install my OmigoSL? Nope! You can DIY this install in about 20 minutes. We have a step-by-step video as well as detailed instructions online or in your bidet seat manual. How is OmigoSL powered? OmigoSL has a 3.5-foot power cord to access your average bathroom GFCI outlet. Don’t have an outlet nearby? Use a properly rated (15 amp GFCI) extension cord. Will this fit my round or one-piece toilet? OmigoSL is designed to fit most US toilets and comes in two different sizes—round and elongated. Installation Useful Resources Owner's Manual Not up to installing it yourself? Task Rabbit is an American online and mobile marketplace that matches freelance labor with local demand, allowing consumers to find immediate help with everyday tasks. Learn more Installation so easy, anyone can do it. OmigoSL has all the parts and hardware for a standard installation. Step 1: Prep your toilet. remove the seat and clean the bowl shut off the water valve and flush the toilet detach the metal hose from toilet tank fill valve Step 2: Connect the fresh water supply. screw the T-Valve onto the fill valve attach the metal hose to the bottom of the T-Valve attach the bidet hose to the middle of the T-Valve Step 3: Install the mounting hardware. place the mounting plate set in the adjustable brackets secure with the screws and washers Step 4: Attach your OmigoSL. slide on your OmigoSL until it clicks attach the water line and turn on the water valve check for leaks then plug into your GFCI outlet start washing! Specs & Documents Power Voltage / Frequency 120 V / 60 Hz Max Power Consumption 1200 W Power Cord Length 3.5 ft Safety Devices Bimetal, Temperature Sensor, Temperature Fuse Remote Control Battery Type / Quantity CR2032 / 4 Seat Weight Limit 330 lb / 149.68 kg Lid Weight Limit 270 lb / 122.47 kg Seat Temperature 4 Levels: OFF – Room Temp; Low (Blue) - 89°F / 31.67°C; Medium (Pink) - 93°F / 33.89°C; High (Red) - 97°F / 36.11°C Water Temperature Control 4 Levels: OFF - Ambient Water Temp; Low (Blue) - 90°F / 32.22°C Medium (Pink) - 95°F / 35°C; High (Red) - 100°F / 37.78°C Standard Wash Time 2 Minutes Nightlight Blue LED Dimensions Elongated: 15.2”(W) x 20.43”(L) x 5.75”(H) Round: 15.2”(W) x 19.55”(L) x 5.75”(H) Weight Elongated: 14.3 lb / 6.5 kg Round: 13.2 lb / 6 kg Warranty 1-Year Limited Warranty California Prop 65 WARNING WARNING: This product has parts that contain lead, known in the State of California to cause cancer & reproductive harm. Wash hands well after handling installation parts.

Full Features Your wash, your way adjustable, 7-position stainless steel nozzle fully adjustable water temperature and pressure heated seat with 3 temperature levels and on/off option Features you'll love illuminating LED nightlight with on/off option instant ceramic water heater provides endless warm water gentle-close, sit-upon bidet seat and lid with easy, quick-release seat removal wireless remote control with batteries and wall mount programmable user settings built-in seat safety sensor requires skin contact to operate bidet Hygienic retractable nozzles separate front and rear nozzles aerated water for a soft and comfortable wash wide and concentrated spray settings self-cleaning nozzle cycle runs before and after each use nozzles retract while not in use Wipe less, wash more optional eco mode reduces energy usage a sustainable alternative to toilet paper and flushable wipes switching to a bidet saves trees, water, and energy simple, DIY installation on your existing toilet UPC certified by IAPMO and cETL approved 1-year limited warranty OmigoSL FAQs. Is the water OmigoSL uses clean? Yes! It is the same clean water used for your sink and shower. Fresh water is accessed using a T-Valve that brings it directly to your OmigoSL for a perfectly fresh wash. How do I clean my OmigoSL? Simply unplug your bidet seat and use mild detergents as you would your normal toilet seat. There is a quick release button so you can easily pop it off for an occasional deeper clean. Do I need a plumber to install my OmigoSL? Nope! You can DIY this install in about 20 minutes. We have a step-by-step video as well as detailed instructions online or in your bidet seat manual. How is OmigoSL powered? OmigoSL has a 3.5-foot power cord to access your average bathroom GFCI outlet. Don’t have an outlet nearby? Use a properly rated (15 amp GFCI) extension cord. Will this fit my round or one-piece toilet? OmigoSL is designed to fit most US toilets and comes in two different sizes—round and elongated. Installation Useful Resources Owner's Manual Not up to installing it yourself? Task Rabbit is an American online and mobile marketplace that matches freelance labor with local demand, allowing consumers to find immediate help with everyday tasks. Learn more Installation so easy, anyone can do it. OmigoSL has all the parts and hardware for a standard installation. Step 1: Prep your toilet. remove the seat and clean the bowl shut off the water valve and flush the toilet detach the metal hose from toilet tank fill valve Step 2: Connect the fresh water supply. screw the T-Valve onto the fill valve attach the metal hose to the bottom of the T-Valve attach the bidet hose to the middle of the T-Valve Step 3: Install the mounting hardware. place the mounting plate set in the adjustable brackets secure with the screws and washers Step 4: Attach your OmigoSL. slide on your OmigoSL until it clicks attach the water line and turn on the water valve check for leaks then plug into your GFCI outlet start washing! Specs & Documents Power Voltage / Frequency 120 V / 60 Hz Max Power Consumption 1200 W Power Cord Length 3.5 ft Safety Devices Bimetal, Temperature Sensor, Temperature Fuse Remote Control Battery Type / Quantity CR2032 / 4 Seat Weight Limit 330 lb / 149.68 kg Lid Weight Limit 270 lb / 122.47 kg Seat Temperature 4 Levels: OFF – Room Temp; Low (Blue) - 89°F / 31.67°C; Medium (Pink) - 93°F / 33.89°C; High (Red) - 97°F / 36.11°C Water Temperature Control 4 Levels: OFF - Ambient Water Temp; Low (Blue) - 90°F / 32.22°C Medium (Pink) - 95°F / 35°C; High (Red) - 100°F / 37.78°C Standard Wash Time 2 Minutes Nightlight Blue LED Dimensions Elongated: 15.2”(W) x 20.43”(L) x 5.75”(H) Round: 15.2”(W) x 19.55”(L) x 5.75”(H) Weight Elongated: 14.3 lb / 6.5 kg Round: 13.2 lb / 6 kg Warranty 1-Year Limited Warranty California Prop 65 WARNING WARNING: This product has parts that contain lead, known in the State of California to cause cancer & reproductive harm. Wash hands well after handling installation parts.