Ramp, Extension - Black Ice Triple Fold Snowmobile and ATV Ramp – 7' 10" L x 54" W

Apex light-duty vehicle traction recovery tracks are portable, easy to use, and fits in a trunk or under a seat for storage. When the vehicle is in a stuck or bogged situation, placing a grip track under the wheel will provide the extra traction needed. Ideal for bogged vehicles which require a little more traction to get moving again. Each grip track features a grooved surface for a rigid grip on vehicle tires, measures 24.625" by 7.875" by 0.75" to handle most wheel sizes, and weighs only 1.35 pounds for portability. Suitable for use in mud, sand, snow, or ice and a must have rescue device that can save time in the outdoors towing or walking.

Create a more comfortable camping experience by stabilizing slide-outs in your RV, travel trailer or camper with this set of two Elevate Outdoor RV Slide-Out Stabilizer Jacks. Designed to reduce sway and increase stability while people are moving within RV or trailer, each jack supports up to 5,000 lbs. and has a universal-fit support bracket on top. These coated steel stabilizer jacks raise and lower manually with a low-profile handle and have three height ranges that can be set using the tethered locking pin. The lowest height range is 19" to 33" H, the medium range is 25" to 39" H and the highest measures 33" to 47" H.

Black Widow interchangeable swingarm pad set for rear motorcycle stands enables a Black Widow motorcycle stand to lift a street bike or sportbike by the rear swingarms. Package includes two swingarm attachment pad pins. Each 1" square pin attachment fits into the motorcycle stand pin collar which is then held in place by the stand's adjustable tightening knobs. The thick rubber pad surface pivots for flush alignment to rear swingarms and featured an extruded grip. Made with durable, treated metal construction for years of reliable use.

The Black Ice snowmobile stand offers easy maintenance or storage of your sled to keep your snowmobile in prime condition year round. Featuring durable steel construction with a black powder-coat finish, this stand has a full shield to block any debris during warmups. Sturdy one-piece construction eliminates hinges and chains, promising years of reliable use.

Black Widow interchangeable rear spool pin set for front motorcycle stands enables a Black Widow motorcycle stand to lift a street bike or sportbike by the rear spools. Package includes two rear spool attachment pins. Each 1" square pin attachment fits into the motorcycle stand pin collar which is then held in place by the stand's adjustable tightening knobs. Made with durable, treated metal construction for years of reliable use.

Black Widow interchangeable fork prong set for front motorcycle stands enables a Black Widow motorcycle stand to lift a street bike or sportbike by the front fork with cradling prongs. Package includes two front prong attachment pins. Each 1" square pin attachment fits into the motorcycle stand pin collar which is then held in place by the stand's adjustable tightening knobs. Dual, rubber-coated prongs pivot for flush surface alignment to front forks. Made with durable, treated metal construction for years of reliable use.

Designed to raise and lower A-frame trailers, the Elevate Outdoor Trailer Jack is constructed from durable steel with a rust-resistant coating and is designed to handle trailers that weigh up to 2,000 lbs. (including cargo). This trailer jack features a hand-operated crank and also comes with a drill adapter for use with any standard power drill. It has a range of 9" to 23"H for a total travel distance of 14". A pre-drilled mounting hole halfway up the shaft allows it to be permanently mounted directly to your trailer’s A-frame using three included mounting bolts.

The versatile Black Ice Tri-Fold Snowmobile and ATV Ramp with Extension and Stud Protectors facilitates easy loading of your sled in the winter and your ATV in the fall. This fully loaded ramp features plastic outer ramp rung grips that help skis climb the ramp while also providing plenty of traction for use with four-wheelers The center ramp features exposed rungs and comes with user-installed stud protectors that offer excellent traction for snowmobiles with studded tracks. Secure the ramp to your truck with two included cam buckle straps and, and the six rubber-coated fingers rest on the tailgate of your truck without causing damage. These dual-purpose ramps are made from high-strength, lightweight aluminum, and compactly fold up for easy storage. The center extension provides added grip when loading on pavement, ice, or into high trucks. The extension is designed to slide under the bottom rung of the snowmobile ramp to keep ramp secure.

The Tru-Cut Ultra-Ramps Steel Truck Service Ramps are ideal for easily raising most trucks, cars, or SUVs for service and maintenance. These ramps feature a stamped steel structure with heavy-duty raised grip holes for extra traction, and are available with solid steel supports to accommodate vehicles weighing up to 9,000 lbs. Both versions feature the same dimensions and loading surface, and include an angled wheel stop to prevent the vehicle from rolling off during loading. Each truck service ramp has a dimension of 35" long x 13" wide x 9¼" high total ramp size which includes an 11" by 9" platform at the top.

Jack up your motorcycle for service and repairs quickly with the Black Widow motorcycle lift jack. With a 1,100 lb capacity, the compact cycle jack securely holds the bike to resist scratches.

The dual-purpose Black Widow Hydraulic Motorcycle Scissor Lift with Casters not only acts as a convenient lightweight motorcycle or dirt bike stand, it safely raises up secured bikes for easier access when wrenching, changing fluids, or performing other service and maintenance tasks. Manufactured from black powder-coated steel, a rubber top pad protects your bike while reducing slippage. The central drainage cut-out makes fluid exchanges easier, and four casters allow you to move the scissor lift around your shop or garage with ease. Two of the casters lock in place for added security while the scissor lift is raised. When used as a lift, this stand raises bikes up from 13.25" to 34" using hydraulic operation. Simply wheel the lift under the dirt bike, secure J-hooks located on either side of the top to your bike’s foot pegs, then steadily pump the foot pedal to raise your bike.

The Black Ice Snowmobile Dolly is an easy-to-use, space-saving alternative to large snowmobile jacks and dollies. It allows you to fully lift your snowmobile's skis and track off the ground and reposition your ride for storage or maintenance. Constructed with durable powder-coated 1.25-inch square steel tubing, this dolly comes with two large front casters (each 5 inches in diameter and 1.125 inches thick), one small rear caster (3 inches in diameter and 1.2 inches thick), and a long lever handle to support the track and help maneuver the snowmobile once it's fully lifted. It requires no electricity, batteries or hydraulics to operate. This dolly folds up to 83.25 inches long by 20.375 inches wide for compact storage, and is lightweight at 35 pounds. Plastic padding on the front bar protects the sled and dolly from damage, while a 17.75-inch long rubber strip on the back prevents tracks with studs from scratching the long handle. To use this snowmobile dolly, lower the front bar and slide it between your skis and track at a 90-degree angle, with the long handle pointed towards the rear. Using the handle, pull down until the front end of your snowmobile is completely lifted onto the plastic padded front bar. The front bar and lifted front end will then act as a fulcrum, allowin(more...)

Made in the United States, the Black Widow 90" L Premium Pneumatic Motorcycle Lift Table makes it convenient and easy to work on motorcycles from dirt bikes to street bikes in your shop or personal garage. This lift table is manufactured from a single piece of heavy-gauge steel for better strength and durability, and includes several unique features to make it just that little bit easier to work on your bike. Powered by compressed air (100-110 psi required) with an included foot pedal control, this table raises motorcycles up to 1,200 lbs. and includes an air hose for convenience. It lifts from a closed height of 7.5" all the way up to a working height of 39" for better access to your bike’s underbody and chassis. Two embedded, removable hardware holders (one on each side) keep bolts, nuts and small parts from rolling off the table for quick on-hand access. The platform measures 90" L x 30" W with a textured, powder-coated 32.75" L x 15" W loading ramp that will keep wheels from slipping during loading or unloading. A rear wheel drop-out makes it easier to repair and tune rear mechanisms and the built-in wheel clamp vise secures the front tire to keep the bike from tipping. Unique to this table, the clamp features a clearly-marked lubrication port so that you can periodically oil the vise for prolonged use.

Made in the United States, the Black Widow 86" L Premium Pneumatic Motorcycle Lift Table makes it convenient and easy to work on motorcycles from dirt bikes to street bikes in your shop or personal garage. This lift table is manufactured from a single piece of heavy-gauge steel for better strength and durability, and includes several unique features to make it just that little bit easier to work on your bike. Powered by compressed air (100-110 psi required) with an included foot pedal control, this table raises motorcycles up to 1,200 lbs. and includes an air hose for convenience. It lifts from a closed height of 7.5" all the way up to a working height of 39" for better access to your bike’s underbody and chassis. Two embedded, removable hardware holders (one on each side) keep bolts, nuts and small parts from rolling off the table for quick on-hand access. The platform measures 86" L x 30" W with a textured, powder-coated 32.75" L x 30" W loading ramp that will keep wheels from slipping during loading or unloading. A rear wheel drop-out makes it easier to repair and tune rear mechanisms and the built-in wheel clamp vise secures the front tire to keep the bike from tipping. Unique to this table, the clamp features a clearly-marked lubrication port so that you can periodically oil the vise for prolonged use.

Black Widow ProLift Roller Plate lets allows the rear motorcycle wheel to smoothly spin when using the BW-PROLIFT-HD heavy-duty motorcycle or ATV lift table. Features 1.375" diameter steel rollers with sealed ball bearings designed to spin freely under the wheel weight, making oiling the bike's chain and cleaning the rear tire rims easy. Constructed of heavy-duty steel with a thick orange paint finish. Ideal for cruisers and sport bikes, the Black Widow Roller Plate is solely compatible with the BW-PROLIFT-HD. Please note: This wheel roller is not designed for use as a dynamometer.

The GXC006 3-Pin Round Connector provides the option of connecting with the commonly used Club Car connector, which is ideal for quick connection and disconnection to golf cart batteries. The GXC006 connector is compatible with the NOCO GX4820 Industrial Charger. The 7' DC output cable with Club Car 3-Pin round style connector is designed tough for rugged environments. In addition, the connector is keyed with a notch and polarized to prevent misconnections.

Safely and easily raise your bike up to 30" off the ground for maintenance, off-season storage, or routine oil changes with the Black Widow Hydraulic Motorcycle Lift Table. Extend the life of your motorcycle while saving time and money by performing your own routine maintenance, service check-ups, and oil changes from the convenience of your garage or shop. This inexpensive motorcycle lift table allows you to effortlessly raise 1,000-lb motorcycles up from 7" to 30" with no need for an air compressor, making it perfect for any shop or garage setup. Each Black Widow high-position motorcycle lift comes standard with an oversized front tire wheel clamp and integrated safety features, making it easy for you to load, secure, and lift your bike by yourself. Simply push your motorcycle onto the platform where the clamp will hold it still while you secure it in place using the removable safety locking bar, built-in tie-down loops, and lock-down screws. Front and rear wheels allow you to maneuver the lift around your shop or garage like a dolly – even when supporting a motorcycle – making it perfect for keeping your bike off wet pavement during off-season storage.

Easily load your ATV, lawn mower, or snowmobile onto the Black Widow Motorcycle Lift with the Extra-Long Lift Table Side Extension Approach Ramps. Measuring 40" long, the extension ramps are twice as long as the ramps that come in the ATV Side Extension kit to prevent bottoming out and make loading easier.

The GBC104 EVA Protective Case is a portable EVA protection case for GBX155 UltraSafe Lithium Jump Starters (sold separately). It features a rugged and durable EVA material with a soft melange velvet lining for a secure, scratch-free fit, as well as precision steel-rimmed zippers, a built-in reinforced handle, and custom over-molded pull tabs.

A must-have for any snowmobile owner, this set of all-terrain snowmobile wheel dollies allows you to maneuver your snowmobile over all types of terrain, from grass, to gravel or around your garage. Offering maximum versatility and durability, these wheel dollies help move your sled at up to 5mph. This set includes 2 ski dollies with a heavy-duty coated steel cable strap, and a track dolly. Featuring Easy Roll 360 degree rotation capacity, you can easily maneuver your sled around your garage shop or into a trailer.

The Black Widow motorcycle and ATV combination lift jack makes it easier to service and clean motorcycles and ATV's without putting stress on your back and knees. An integrated hydraulic foot pedal allows the operator to lift up to 1,500 lbs. from 5.25" to 15.75" high with foot pump action.