JOBY GRIPTIGHT WALL MOUNT MAGSAFE

Panoramic Tripod Head GripTight PRO Phone Mount Bluetooth For Smartphones Motion control for mobile creators Incompatible with cameras Kitted with a phone mount for your convenience, create incredible smartphone content with Spin's easy-to-use and effective motion control. Designed for dynamic motion timelapses, killer b-roll videos, and silky-smooth panoramic stills Motion control for mobile creators. Incompatible with cameras Pairs perfectly with included GripTight PRO phone mount Mounts to GorillaPod® or other supports via 1/4"-20 Use the JOBY Motion app and your widest-angle smartphone camera. Pocket-sized and lightweight for on-the-go creativity The JOBY® Spin Phone Mount Kit empowers creators by enabling incredible smartphone content with simple and effective motion control functionality. Designed in partnership with the motion control geniuses at Syrp® Lab, the innovative Spin is a pocket-sized powerhouse that uses the latest tech to create dynamic motion timelapses, killer b-roll videos, and silky-smooth panoramic stills. Fully supported with Bluetooth® control via the JOBY Motion app for iOS or Android, quick edits are made easy and sharing to your favourite platform is only a couple clicks away. The Spin is ideally matched with the GripTight PRO mount, available already bundled in the Spin Phone Mount Kit. It's then easily paired with your favourite GorillaPod®, HandyPod, TelePod, or RangePod via the 1/4"-20 mounting point (tripod sold separately). Using the included USB-C charging cable, the Spin achieves full charge via 5V/0.8A in only 150 minutes - and with that, you get up to 3 hours of shooting time, depending on usage. With the ability to support up to 750 g (1.7 lb), you can mount your smartphone and shoot 360 degrees on any axis. There is also the ability to pair together two Spins together with the Pan Tilt Bracket for Spin (sold separately) to create a dual axis pan and tilt device. This combination allows for jaw-dropping moving timelapses

Bluetooth Electronic Slider BallHead Phone Mount Slider motion for mobile creators Incompatible with cameras This portable slider smartphone mount includes the Swing Bluetooth electronic slider paired with a BallHead and phone mount. Open a world of professional motion control timelapses, videos, and b-roll Slider motion for mobile creators. Incompatible with cameras Included GripTight ONE phone mount and BallHead 1K Use the JOBY Motion app and your widest-angle smartphone camera. Lightweight, robust, and travel-friendly Compact, lightweight, robust, and travel-friendly The JOBY® Swing Phone Mount Kit brings next-level technology in an easy-to-use product to creators looking to add unique electronic slider motion control to their smartphone content. Designed in partnership with the motion control geniuses at Syrp® Lab, the innovative Swing delivers smooth app-driven linear movement. For creators, this opens a world of professionally finished motion timelapses, effortless videos, and polished b-roll footage. Fully supported with Bluetooth® control via the JOBY Motion app for iOS or Android, quick edits are made super easy and sharing to your favourite platform is only a couple clicks away. The Swing pairs perfectly with the supplied GripTight ONE phone mount and BallHead 1K - then, add in a strong JOBY support solution of choice. Just mount your smartphone, spread those GorillaPod 3K or 5K legs wide in a stable position - or wrap them securely around an object - and start creating unforgettable content! Or, if you prefer a full-size tripod solution, the Swing is easy to set up with your RangePod Smart too (tripods sold separately). Using the included USB-C charging cable, the Swing achieves a full charge via 5V/0.8A in 150 minutes. With that charge, you get up to 3 hours of shooting time, depending on usage. With a linear travel distance of 38 cm (15 in), the Swing has a built-in bubble level to aid with setup. And with a payload of 600 g (1.3 lb), you can easily

Support clamp for iXY and iPhone 4/4S iXY Stereo Microphone and iPhone are NOT included Heavy-duty clamp designed to provide additional support for your iXY stereo microphone during high movement usage with an iPhone 4 or iPhone 4S Specifications: Dimensions (HxWxD): 25 x 40 x 50 mm Weight: 6 g | Rode Iclamp Mount for Smartphones (Ixy)

Lightweight and Compact Rotating Smartphone Mount Extension Grip Fits any smartphone & rotates 360 degrees from Portrait to Landscape Features: Lightweight and compact Use it handheld or hands-free to mix up your smartphone video content Rotating smartphone mount easily moves from landscape to portrait mode 2 x built-in cold shoe attachment points Extension Grip provides comfortable holding position and is removable to customize your set up | LUME CUBE MOBILE CREATOR STAND

DJI RS4 Mini Gimbal | White

For Smartphones 60-104mm Wide Spring Lock and Side Lock Landscape and Portrait Mode Cold Shoe Mount on Top The Manfrotto PIXI Clamp is designed to safely attach any smartphone - 60mm to 104mm wide - to any kind of support, such as the PIXI mini tripod. The clamp features two 1/4 inch attachments on its side and bottom, allowing for portrait mode along with regular landscape mode. It also has a handy shoe mount on top for attaching LED lights, mics or other accessories. Its secure Y-lock locking lever ensures your phone's security and makes it easy to capture the best content. Features: Holds smartphone with widths of 60mm - 104 mm Universal tripod and lighting connections Double lock mechanism: spring lock and side lock Two 1/4 inch attachments: for landscape and portrait mode Ergonomic Italian design, compact and lightweight Specifications: Weight: 41 g / 1.45 oz Top Attachment: cold shoe Depth: 3.8 cm / 1.18 in Height: 8.7 cm / 3.15 in Width: 3 cm / 1.18 in Material: Rubber, ABS Plastic Maximum Opening Range: 10.4 cm / 4.09 in Minimum Opening Range: 6 cm / 2.36 in Maximum Working Temperature: 60 C / 140 F Minimum Working Temperature: -30 C / -22 F Mounting Method: 1/4" Quick Release: No | Manfrotto Pixi Smartphone Clamp Tripod

Two-section Legs Two Different Leg Angles Ball Head Designed as a lightweight portable solution to support cameras with larger lenses and its rich feature set provides flexibility of use, robustness and great variety of framing. PIXI EVO tripod boasts two different leg angles with a sliding selector, enabling one to shoot ground level images. Indeed another great innovation is its two-section legs, adjustable in five different steps adapting to non-level surfaces. With this footprint it is possible to take low light landscape and architecture pictures with maximum stability. With PIXI EVO there is also the possibility to shoot in portrait mode, allowing the camera to tilt to 90 degrees to capture incredible images, while ensuring great stability and precision for accurate pictures. Compatibility: PIXI has been developed for entry level DSLRs fitting these basic requirements: Body: maximum weight of 750 g / 1.65 lb Focal length: maximum 18-200 mm (standard non-professional lens) Total equipment payload: maximum 2.5 kg / 5.5 lb PIXI EVO supports a wide range of devices up to 2.5 kg / 5.5 lb but it remains extremely lightweight thanks to its Adapto and aluminium construction and can be easily carried anywhere without ever feeling cumbersome. Note: To preserve and protect PIXI's finishing and its original colour Manfrotto recommends cleaning it with a standard white pencil eraser. Special products or water could damage the finishing. Specifications: Weight: 0.26 kg / 0.57 lb Maximum Height: 20 cm / 7.87 in Minimum Height: 10.5 cm / 4.13 in Closed Length: 20.5 cm / 8.07 in Leg Sections: 2 Safety Payload Weight: 2.5 kg / 5.51 lb Material: Aluminum, Technopolymer Top Attachment: 1/4" screw Ball Locking: Yes Easy Link: No Friction Control: No Front Tilt: -35 degrees / +35 degrees Lateral Tilt: -90 degrees / +40 degrees Leg Type: Single Leg Angles: 50, 75 degrees Leg Lock Type: Button Lock Maximum Working Temperature: 60 C / 140 F Minimum Working Temperature: -30 C / -22 F P

DJI Osmo Mobile 8 Smartphone Gimbal | Black

Insta360 Flow 2 Pro Smartphone Gimbal Tripod | Grey

DJI Osmo Mobile 7 Smartphone Gimbal | White

Enables Dual Axis Motion Control Connects 2 Bluetooth Electronic Heads Pan and Tilt Functionality For use with Smartphones Enable dual axis motion control with JOBY's smartphone Pan Tilt Bracket - simply connect two Spin units, and create epic content! Bracket that enables two Spin Bluetooth electronic heads and phone mount to be connected (Spin heads and phone mount sold separately) Lightweight bracket that connects 2 Bluetooth electronic heads Pan and tilt functionality allows for incredible time-lapses Easy-to-use dual axis motion control technology for smartphone Robust payload of 650 g (1.4 lb) to support the latest phones Use the JOBY Motion app and your widest-angle smartphone camera. Built for easily creating unique moving timelapses and videos with your smartphone utilizing dual axis motion control, the Pan Tilt Bracket for JOBY Spin Mobile Tripod Heads is a robust motion control accessory that enables two Spin Bluetooth electronic heads and phone mount to be connected (Spin heads and phone mount sold separately). With a robust payload of 650 g (1.4 lb), this bracket works seamlessly with the JOBY Motion app for iOS or Android. Simply attach a Spin to each end of the bracket, pair the Spins via Bluetooth, and you're ready to create jaw-dropping moving timelapses and epic b-roll video output with just a smartphone. Super easy to set up and breakdown, this bracket is an epic accessory to keep in your content creation toolkit. Specifications: Top Attachment: 1/4-20" female thread Attachment Type: 1/4"-20 standard tripod mount Material: Glass-Filled Plastic Colour: Grey Dimensions: 14.1 x 5.5 x 13.2 cm / 5.55 x 2.17 x 5.20 in Weight: 0.1 kg / 0.22 lb Capacity: 0.65 kg / 1.43 lb | JOBY PAN TILT BRACKET FOR SPIN

Robust, Premium Build Portrait or Landscape Mode Adjustable Tilt Angle Fits up to 19.2 cm/7.5 in Tablets Intuitive Tablet Mount for Everyday Use (Supports Up To 19.2 cm / 7.5 in Tablet Width) Premium locking mount for hands-free use of your tablet in portrait or landscape modes. Premium build with durable ABS, TPE grips and stainless steel Rotates for portrait or landscape mode and locks securely Designed for a secure hold capturing images or viewing video Tilt angle adjusts for optimal angle or to avoid glare Lock down that Tablet: The GripTight Mount PRO for Tablet is JOBY's premium locking mount which gives you ultimate hands-free use and awesome stability in Portrait or Landscape modes. Built with durable ABS, TPE and Stainless Steel, its premium mount can accommodate any tablet with a width of 12.8 to 19.2 cm (5-7.5 inch) and a depth up to 12 mm (0.47 inch). It even boasts up to 180 degrees of tilt, so you can get rid of screen glare while watching the latest episode of your favourite series. With its standard 1/4-20 inch mount, the GripTight Mount PRO for Tablet pairs perfectly with JOBY's GorillaPod stands as well as full size tripods like JOBY's RangePod. (Stands and Tripods Sold Separately) Specifications: Device: Small Tablet Attachment Type: 1/4"-20 standard tripod mount Material: ABS Plastic, Stainless steel, TPE Dimensions: 5.3 x 7.6 x 13.6 cm / 2.09 x 2.99 x 5.35 in Weight: 0.15 kg / 5.29 oz *Tripod not included. | Joby Griptight Mount Pro for Tablets