Filtrabox COMPACT X Multi-Stage Fume Extractor

Your Indoor Laser Solution: All OMTech CO2 lasers are designed with exhaust systems that vent to the outside environment. However, venting outdoors is not always an option due to confined spaces, exhaust exit proximity, local health regulations, or other limitations. The FILTRABOX MICRO provides a class-leading and affordable indoor laser exhaust solution. You can now operate your OMTech laser engraver in a windowless room and avoid cutting an exhaust exit in your wall. The FILTRABOX × OMTech Multi-Stage Fume Extraction System utilizes best-in-class filters to remove 99.9% of airborne particulates from your laser engraving exhaust. The Filtrabox system was researched, designed, developed, and constructed in North America. The MIRCO is specially engineered for 40W to 55W OMTech CO2 laser engravers, plus our complete range of Fiber Laser Markers. Micro Size, Mighty Filtration: Overall Dimensions: 26"H ×10"W × 17"D (66 × 25.4 × 43.2 cm) Weight: 75 lb (34 kg) Air Flow Rate: 128 CFM Quiet Performance: 55 decibels or less Triple Filtration Media: 3-Stage F9 PreFilter, HEPA H14, & Oxycarbon 20 lb Filter Power Supply: Standard AC 120V (230V available on request) Compatibility: Compatible with ALL OMTech Fiber Laser Markers - Light-Duty Cycle Compatible with the following OMTech CO2 Laser Engraver workbed sizes: 8" x 12" (heavy-duty cycle) 12" x 20" (light-duty cycle), 16" x 24" (light-duty cycle) Advanced Air Purification: The three-stage filtration system removes virtually all laser engraving byproducts: fumes, odors, and airborne particulates, without venting outside Best In Class Filters: 1. Pre-Filter (Class F9 6m2), 2. HEPA Filter (Class H14 6m2), 3. Gas Filter: Oxy-Carbon 20lbs. Eliminates virtually ANY smells and odors from laser operations, including acrylic, rubber, leather, and more. Long-term & corrosion-free performance with easily replaceable filters Convenient Performance: Quick-Release Filter Modules allow quick and easy access for replacement. No frustrating setup or dusty cabinets to deal with. Low-cost replacement filters have a 6-month life cycle but vary depending on daily use. 1-Year warranty from Filtrabox on all parts excluding filtration medias After you order, please email the following information to [email protected] (required by Filtrabox): Your order number Commercial or Residential address Customers' Federal Id Tax # or SSN # Receiving Details - Loading dock on site, truck liftgate required, etc. Any other specific services required at delivery. *This product will be shipped to you directly from Filtrabox within 2 weeks. Please contact Filtrabox for your order and tracking info.

Compatible with Co2 Laser Engraver and Fiber Laser Marking Machines: This specialized mobile fume extractor works alongside your fiber laser marker, pulling potentially harmful smoke and fumes directly out of the air. This air purifier is readily compatible with CO2 laser engraving machines. Convenient Sizing: Dimensions: 11 x 11 x 17" (28 x 28 x 43 cm) Weight: 19.8 lb (9 kg) Extraction Tube Length: 4 ft. (1.2 m) Extraction Hood Dimensions: 8.9" x 4.9" (22.5 x 12.5 cm) Air Inlet Diameter: 2.6" (6.5 cm) Power Cord Length: 6 ft. (1.8 m) Power: Input Voltage: 110V/60Hz Power Consumption: 80W Max. Noise Level: 55 dB Filter Layers: 3 Negative Pressure: 0.3 psi (1700 Pa) Max. Rotational Speed: 5800 rpm Max. Airflow Speed: 106 cu. ft./min. (180 m3/h) Cutting Edge Features: INDUSTRIAL FUME EXTRACTOR: The powerful 80W DC motor on OMTech's industrial-strength XF-180 fume extractor creates a powerful 106 cu. ft./min. airflow to pull in exhaust and purify air during any laser engraving project. The provided 2.6" to 4" adapter lets this fume extractor connect to 40W OMTech laser cutting and engraving machines. 3-STAGE FILTER: Our smoke extractor continuously pulls in your machine's fumes and debris, running them progressively through its cotton outer filter, its central HEPA filter, and its inner activated charcoal filter to absorb all your work's harmful gases and unpleasant odors. HIGHLY MOBILE: The 4 quality caster wheels move this small but dependable smoke purifier easily between your devices when needed and then lock smartly in place once you're ready to go. The hermetically-sealed extraction tube easily folds and fixes at the perfect angle wherever you need it. INTUITIVE CONTROL: At a press of the button, you can easily adjust this purifier's airflow between three modes to match your needs. Package Includes: 1 x Fume Extractor 1 x Extraction Tube 1 x Extraction Hood 1 x Cotton Primary Filter 1 x HEPA H11 Filter 1 x Activated Carbon Filter 4 x Replacement Filters 1 x Power Cord 1 x 2.6-4 in. (6.5-10 cm) Adapter 1 x Extraction Port Adapter 1 x Instructions Warranty: No need to worry! We offer a 1-year warranty on this Fume Extractor. Certifications: FDA Compliant CE Certification ISO9001 Quality Certification

Breathe easy with OMTech's 60W fume extractor, the perfect solution for maintaining a clean and safe workspace. With a robust airflow of 100 m3/h (58.9 cfm), this 2-stage air purifier efficiently pulls in fumes, making it perfect for tasks like laser engraving, welding, and soldering. Featuring a dual-stage filtration system that combines a primary cotton filter with a HEPA and activated carbon composite filter, this smoke absorber captures everything from larger debris to tiny pollutants. You can easily customize the suction power to match your preferences with a simple twist of the adjustment knob. Our dedicated support teams in the U.S., China, and the Philippines are available around the clock, so you can always count on us for help. Powerful Fume Extraction: OMTech's powerful 60W fume extractor efficiently removes 99.95% of harmful particles larger than 0.3μm, helping you maintain a clean workspace and create a safer environment for your projects Fume-Free Crafting: This smoke absorber features a powerful 60W motor that generates max. airflow of 100 m3/h (58.9 cfm), effectively pulling in fumes and purifying the air during tasks such as laser engraving, welding, soldering, and more Dual-Stage Filtration System: This air purifier incorporates a primary cotton filter to capture larger particles, paired with a HEPA and activated carbon composite filter that eliminates smaller particles and absorbs harmful fumes Tailored Suction Power: Effortlessly adjust the air flow to match your preference using our easy-to-use adjustment knob for all your tasks at hand Around-the-Clock Support: Our dedicated support teams in the U.S., China, and the Philippines are available 24/7 to assist you whenever you need help

Your Indoor Laser Exhaust Solution: All OMTech CO2 lasers are designed with exhaust systems that vent to the outside environment. However, venting outdoors is not always an option due to confined spaces, exhaust exit proximity, local health regulations, or other limitations. The FILTRABOX EXPAND X provides a class-leading and affordable indoor laser exhaust solution. You can now operate your OMTech laser engraver in a windowless room and avoid cutting an exhaust exit in your wall. The OMTech × FILTRABOX Multi-Stage Fume Extraction System utilizes best-in-class filters to remove 99.999% of airborne particulates from your laser engraving exhaust. The Filtrabox system was designed, developed, and constructed in North America. Expand X1 & X2: The Expand X1 and X2 are both equipped with the same advanced filtration media, but the X1 has one blower (235 CFM) and the X2 has two blowers (470 CFM). The EXPAND X1 is specially engineered for OMTech Mid-Range & High-Power CO2 laser engravers with workbed sizes from 16" x 30" up to 24" x 40". The EXPAND X2 provides filtration for OMTech Mid-Range & High-Power CO2 laser engravers with workbed sizes from 24" x 35" up to 35" x 55". Expand X1: Compatible with the following OMTech CO2 Laser Engraver workbed sizes: 16" x 30" (heavy-duty cycle), 20" x 28" (heavy-duty cycle), 24" x 35" (light-duty cycle), and 24" x 40" (light-duty cycle) Power Supply: Standard AC 110-120V, 15 amp (220V available on request) Air Flow Rate: 235 CFM Quiet Performance: 50 decibels or less Expand X2: Compatible with the following OMTech CO2 Laser Engraver workbed sizes: 24" x 35" (heavy-duty cycle), 24" x 40" (heavy-duty cycle), and 35" x 55" (light-duty cycle) Power Supply: Standard AC 110-120V, 20 amp plug (220V available on request) Air Flow Rate: 470 CFM Quiet Performance: 53 decibels or less Industrial-Grade Filtration: Overall Dimensions: 38"H × 15"W × 31"D (96.5 × 38.1 × 79 cm) Weight: 225 lb (102 kg) Triple Filtration Media: Fan Filter, Pre-HEPA F9 Glass Filter, HEPA Block Filter, & Activated OXY-Carbon Filter Advanced Air Purification: The three-stage filtration system removes virtually all laser engraving byproducts: fumes, odors, and airborne particulates, without venting outside Best In Class Filters: Fan Filter, Pre-Filter, HEPA Block, Large Activated Carbon Filter Eliminates virtually ANY smells and odors from laser operations, including acrylic, rubber, leather, and more. Long-term & corrosion-free performance with easily replaceable filters Convenient Performance: Quick-Release Filter Modules allow quick and easy access for replacement. No frustrating setup or dusty cabinets to deal with. Locking caster wheels provide easy mobility Low-cost replacement filters have a 6-month life cycle but vary depending on daily use. 1-Year warranty from Filtrabox on all parts excluding filtration medias After you order, please email the following information to [email protected] (required by Filtrabox): Your order number Commercial or Residential address Customers' Federal Id Tax # or SSN # Receiving Details - Loading dock on site, truck liftgate required, etc. Any other specific services required at delivery. *This product will be shipped to you directly from Filtrabox within 2 weeks. Please contact Filtrabox for your order and tracking info.