Pre-Owned EFR 100W CO2 Laser Tube for Laser Engraver Cutting Machine

PPride - CONTROLLER,ASSY,S-DRIVE MKII,120 AMP, WRANGLER DUAL DRIVE - CTL1806259

Upgrade your fiber laser engraving and marking capabilities with the 200x200mm Replacement Optical Scanning Lens from OMTech Laser. Designed specifically for 1064nm fiber lasers operating at 60 watts or below, this precision F-theta lens expands your creative potential with a generous 7.9x7.9 inch work area. Whether you are etching intricate designs on steel, aluminum, or gold, this lens delivers consistently sharp results with a spot size as small as 20 microns across the entire 20x20 cm field. Crafted from premium borosilicate crown glass, this optical scanning lens offers exceptional light transmittance of up to 99 percent at the critical 1064nm wavelength. The double sided multilayered coatings not only enhance its natural optical properties but also provide robust protection against scratches and daily wear. This means you can rely on this lens for long term durability, keeping your projects running smoothly season after season. Installation is straightforward thanks to the standard M85x1 threading, making it a perfect fit for most fiber laser marking machines on the market, including all models from OMTech. You can quickly replace an older lens or upgrade your system with minimal downtime. The lens also supports fast positioning and precision focusing, ensuring your engraving, cutting, and marking tasks are completed with speed and accuracy. Ideal for stone, glass, and metal applications, this replacement lens turns complex designs into vivid markings without distortion. By choosing OMTech Laser, you invest in reliable performance and peak optical clarity. Visit https://omtech.com to explore more accessories and elevate your laser engraving experience today.

Give your laser engraver a new lease on life with a certified pre-owned 130W CO2 laser tube from OMTech. This isn't just any used part; it has been thoroughly inspected, repaired, and tested by our specialists at the Anaheim headquarters to ensure it functions like new. While it may show some cosmetic wear, you can trust that its performance is fully optimized and ready for demanding projects. Built with tough borosilicate glass and advanced gold catalyst coating, this tube delivers a stable, powerful beam for precise cuts and engravings. It connects easily to your existing water cooling system, keeping operations safe and efficient during long work sessions. With a focused beam spot of just 6mm and a premium infrared lens, you get reduced light loss and cleaner results on materials like wood, acrylic, leather, and glass. This pre owned option provides the same high quality German inspired engineering you expect from OMTech, but at a more accessible price point. It offers a dependable service life and comes with our standard 16 month warranty for your peace of mind. Each unit is carefully packed on a reinforced pallet with multiple layers of protection to ensure safe delivery. Upgrade your machine affordably while maintaining professional grade output. Order your certified pre-owned laser tube today from OMTech and experience reliable performance without the full price tag.

Upgrade your laser engraving precision with the 18mm CVD ZnSe Focal Focus Lens from OMTech Laser, available at https://omtech.com. Engineered from premium zinc selenium through chemical vapor deposition, this lens delivers exceptional optical clarity for your CO2 laser cutter. Its double sided antireflective coatings achieve a remarkable 99.5% transmittance rate for infrared light at 10.6 microns, ensuring every beam of energy hits your material with maximum efficiency. This high performance translates into sharper cuts, cleaner engravings, and reduced power waste, saving you time and material costs. Durability is built in with a scratch resistant coating that extends the lens’s service life, even in demanding workshop environments. The plano convex design makes installation straightforward, so you can get back to creating without hassle. This 18mm diameter lens is widely compatible with OMTech 50W to 100W CO2 laser engravers, including models like MF1220, MF1642, MF2028, AF2028, and AF2435. Always check your machine’s manual to confirm the focal lens diameter before purchasing. Choose from multiple focal lengths including 1.5, 2, 2.5, 3, or 4 inches to match your specific engraving or cutting needs. Regular maintenance is key to preserving performance. Smoke and debris can build up on the lens, absorbing laser power and affecting precision over time. OMTech recommends inspecting and cleaning your optics system weekly and replacing the lens when damaged. Backed by a 1 year warranty and compliant with FDA, CE, and ISO9001 standards, this lens is a reliable investment in your craft. Experience the difference a premium focus lens makes for your next project.

Keeping your fume extractor running at peak performance means staying on top of filter changes. Clogged filters can compromise air quality and lead to equipment strain, but OMTech makes it simple to keep your workspace safe. Our premium 3 in 1 replacement filter is designed specifically for the OSP060 fume extractor, offering a perfect fit for quick and hassle free swaps. This advanced filter combines three powerful layers in one unit. An F8 fiberglass layer captures dust and larger particles, while a 1200 iodine activated carbon layer effectively neutralizes unpleasant odors like formaldehyde and benzene. The H13 HEPA layer then traps fine particulates, ensuring both gaseous and solid pollutants are handled in a single pass. This comprehensive design helps maintain high air quality and extends the life of your fume purifier. By replacing your filter on schedule, you prevent clogs that reduce suction and efficiency. This not only protects your equipment but also safeguards your health and the cleanliness of your worksite. Whether you are engraving, cutting, or working with materials that produce fumes, this replacement filter keeps your 60W system chugging along reliably. Don't let a dirty filter slow down your projects. Trust OMTech for exact fit components that make maintenance easy and effective. Order your replacement filter today to keep your laser workspace safe, clean, and productive.

Don’t let a clogged filter slow down your workflow or compromise your air quality. OMTech brings you the 5 Pack Pre Filter Replacement designed specifically for 60W fume extractors, so you can keep your workspace safe, clean, and productive. These prefilters are the exact same primary filters used in our own OMTech fume extractors, ensuring a perfect fit and reliable performance every time. Each prefilter acts as the first line of defense against harmful fumes generated during laser engraving, CNC machining, soldering, and welding. With high filtration efficiency, these replacements easily capture airborne particles 10 microns and larger, including dust, debris, and other contaminants. By swapping out your filters regularly, you prevent clogs that lead to substandard air quality and equipment malfunctions. The intuitive design makes installation quick and hassle free, so you can get back to your projects without downtime. Each filter helps extend the life of your fume purifier, saving you money on repairs and replacements over time. Keep your OSP060 running smoothly and your worksite safe with this convenient five pack. Stock up today and enjoy the peace of mind that comes with consistent, clean air. Visit OMTech.com to order your set and keep your laser engraving or CNC operation at peak performance.

Compatible Machines: DF0812 Advanced Specifications: Anti-reflective coated lens for <200W. Type: Meniscus Laser Focal Lens Material: ZnSe Laser Grade (made in the USA) Coating: 10.6um (AR Both Side) Diameter Tolerance: +0/-0.13mm Center Thickness Tolerance: ± 0.1mm Focal Length Tolerance: < 1% Clear Aperture: >= 90% Diameter Scratch/Dig: 40-20 Cutting Edge Features: OMTECH TESTED: Each American Photonics focal lens is tested on OMTech machines and approved by our laser specialists. QUALITY ZINC SELENIDE: Manufactured with premium zinc selenium via chemical vapor deposition for superior light transmission and heat tolerance. EXACTING LENS DIMENSIONS: Each lens is engineered and built with only a 0.003mm margin for error to ensure finer laser focus on high-resolution engravings and enable sharper cutting abilities. ULTRA-PURE MANUFACTURING: American Photonics utilizes an ultra-clean production room to ensure every focal lens is free from all impurities, reducing heat damage and ensuring extremely consistent laser beam transmission. HANDMADE IN THE USA: Each American Photonics focal lens is cored, polished, edged, coated, and packaged by hand with expert precision in each step. EXTREME HEAT TOLERANCE: Crafted to resist heat damage, cracking, and staining. A melting point of 2777°F (1525°C) easily withstands the thermal demands of CO2 laser applications. SUPERIOR LIGHT TRANSMITTANCE: Both sides are carefully coated with a strongly anti-reflective finish optimized for infrared light at a wavelength of 10.6 microns. LASTING DURABILITY: Our laser engraver focus lenses' double-sided coating process ensures outstanding scratch resistance for longer service life. WIDE COMPATIBILITY: This laser focus lens is designed to work with all CO2 laser engravers below 200W. Please check the focal lens diameter in your machine’s manual before purchasing. Summary: As you engrave, debris such as smoke and dust land on your focal lens, building up a layer of residue over time that absorbs laser beam power and can stain the lens permanently. Eventually, this lost power will affect your machine’s precision and throw off your laser settings. To keep your device running at its full potential, we recommend inspecting and cleaning the optics system once a week and replacing the mirrors or focal lens as soon they get damaged. How to Select the Proper Focal Length: A lens with a shorter focal length (1.5"–2.5") has a smaller focal point to provide sharper details for high-resolution images. A longer focal length (usually up to 4") has a larger focal point and extended depth of focus (or focus tolerance) which is better suited for cutting applications. Also, keep in mind that using longer focal lengths subtract from your workbed’s Z-depth. Warranty: American Photonics provides a 30-Day 100% Guarantee

Replace your old laser tube and optimize your laser engraver and cutter machine's performance with OMTech's highly efficient 50W CO2 laser tube! Made of tough borosilicate glass, this 850 mm (33.4") long 50 mm (2") wide CO2 laser tube is superior to its competitors as it incorporates gold catalyst nanocoating and high-end German technology into the engineering of its glass tube construction, making it more durable to withstand high temperature and pressure. It is cost-efficient yet dependable with up to 6,000 hours of service life. The built-in tubing and ports on this laser engraver replacement tube allow easy connection to your water chiller or pump and efficient cooling during operation. To meet your needs, we offer a variety of laser tubes from 40W to 150W. Get your replacement laser tube from OMTech and start enjoying its superior quality and efficient performance today! Features POWERFUL LASER TUBE: OMTech's 50W CO2 laser tube, with tempered borosilicate glass, premium II-VI infrared lens, gold catalyst coating, and 6,000 hour long service life, ensures powerful and stable laser beam for optimal performance PRECISION MASTERPIECES: Achieve precise cuts using your laser engraver and cutter machines with this single-mode laser cutter tube, which features a 4 mm focused beam spot and an American II-VI infrared lens for reduced light attenuation SAFE OPERATION: With integrated water tubing and ports, our laser engraver replacement tube allows for efficient cooling and easy connection to a water pump or water chiller, while the hermetically sealed borosilicate glass case offers exceptional durability WIDE APPLICATION: This 850 mm (33.4") long 50 mm (2") wide laser tube operates at 18kV and 4mA for engraving acrylic, cardboard, ceramics, fabric, glass, leather, paper, stone, wood, and more SATISFICATION GUARANTEED: Order this laser engraving machine tube from OMTech today and enjoy fast US-based shipping, easy hook-up with preinstalled connection wires and ports, an industry-leading 9 month warranty, and ever helpful customer service and tech support Specifications Material: Borosilicate Glass, Metal Laser Tube Type: CO2-Filled Glass Cooling Method: Water Rated Power: 50W Length: 33.4 in. (850 mm) Diameter: 2 in. (50 mm) Wavelength: 10,600 nm Beam Quality: 1.3 m2 Max. Beam Diameter: 0.2 in. (4 mm) Operating Voltage: 18kV Operating Current: 4mA Rec. Water Temperature: 60-75°F (15-25°C) Expected Lifespan (MTTF): 6,000 hr. Net Weight: 2.4 lb. (1.1 kg) Warranty: 9 mo. Package List 1x CO2 Laser Tube 1x Instructions

Replace your old laser tube and optimize your laser engraver and cutter machine's performance with OMTech's highly efficient 130W CO2 laser tube! Made of tough borosilicate glass, this 1650 mm (65") long 80 mm (3.1") wide CO2 laser tube is superior to its competitors as it incorporates gold catalyst nanocoating and high-end German technology into the engineering of its glass tube construction, making it more durable to withstand high temperature and pressure. It is cost-efficient yet dependable with up to 6,000 hours of service life. The built-in tubing and ports on this laser engraver replacement tube allow easy connection to your water chiller or pump and efficient cooling during operation. To meet your needs, we offer a variety of laser tubes from 40W to 150W. Get your replacement laser tube from OMTech and start enjoying its superior quality and efficient performance today! Features POWERFUL LASER TUBE: OMTech's 130W CO2 laser tube, with tempered borosilicate glass, premium II-VI infrared lens, gold catalyst coating, and 10,000 hour long service life, ensures powerful and stable laser beam for optimal performance PRECISION MASTERPIECES: Achieve precise cuts using your laser engraver and cutter machines with this single-mode laser cutter tube, which features a 6 mm focused beam spot and an American II-VI infrared lens for reduced light attenuation SAFE OPERATION: With integrated water tubing and ports, our laser engraver replacement tube allows for efficient cooling and easy connection to a water pump or water chiller, while the hermetically sealed borosilicate glass case offers exceptional durability WIDE APPLICATION: This 1650 mm (65") long 80 mm (3.1") wide laser tube operates at 27kV and 7mA for engraving acrylic, cardboard, ceramics, fabric, glass, leather, paper, stone, wood, and more SATISFICATION GUARANTEED: Order this laser engraving machine tube from OMTech today and enjoy fast US-based shipping, easy hook-up with preinstalled connection wires and ports, an industry-leading 16 month warranty, and ever helpful customer service and tech support Specifications Material: Borosilicate Glass, Metal Laser Tube Type: CO2-Filled Glass Cooling Method: Water Rated Power: 130W Length: 65 in. (1650 mm) Diameter: 3.1 in. (80 mm) Wavelength: 10,600 nm Beam Quality: 1.3 m2 Max. Beam Diameter: 0.2 in. (6 mm) Operating Voltage: 27kV Operating Current: 7mA Rec. Water Temperature: 60-75°F (15-25°C) Expected Lifespan (MTTF): 10,000 hr. Net Weight: 7.5 lb. (3.4 kg) Warranty: 16 mo. Package List 1x CO2 Laser Tube 1x Instructions

Download the Manual 300x300mm FIELD LENS: This powerful F-theta lens from OMTech is ideal for laser marking, engraving, image transfer, material processing, and cutting systems; it creates vivid markings and flawlessly completes even your most complicated designs across its 11.9x11.9 inch work area HIGH TRANSMITTANCE: This field lens for 1064 nm lasers provides up to 99% throughput with negligible distortion thanks to its crystal clear and precision engineered borosilicate crown glass construction SUPERIOR PERFORMANCE: Our F-theta scanning lens provides fast positioning and precision focusing so you'll be able to mark steel, aluminum, gold, and more with a consistently exact 20 micron spot size anywhere in the lens's 30x30 cm field LASTING DURABILITY: Our fiber laser lenses' double-sided multilayered coatings improve their natural optical properties while also strengthening them against scratches and damage during daily use, so you can keep cutting year after year EASY INSTALLATION: The standard M85x1 threading ensures easy installation, quickly replacing or upgrading the old lens in most laser marking machines on the market, including all those from OMTech Engrave better and faster with this ultra-high transmittance fiber laser field lens from OMTech! Whether you're replacing a worn scan lens or upgrading, this fiber laser lens offers extreme precision and peak optical performance across its entire 300x300mm work area to get all your stone, glass, and metal marking done right. Manufactured from premium borosilicate crown glass, this galvo scanner lens boasts strongly antireflective coatings on both sides to give you a light transmittance rate better than 99% at the 1064nm wavelength critical for CW, QCW, and Nd:YAG lasers. To ensure the longest possible service life, the coating on both sides of the lens also helps it resist scratches and other damage during daily use. The standard M85x1 threading lets you easily install this optical lens onto the galvanometer of most fiber etching machines, including all those from OMTech. With OMT's brand-new F theta lens, your laser engraving, cutting, etching, and marking work has never been easier! Specifications Material: K9 Glass, Plastic Scanning Area: 11.9x11.9 in. (300x300 mm) Operating Wavelength: 1064 nm (1.064 μm) Focal Length: 16.9 in. (430 mm) Entrance Beam Diameter: 0.4 in. (10 mm) Spot Size: 32 μm Working Distance: 22 in. (560 mm) Threading: M85x1 Overall Dimensions: 1.9x3.5 in. (49x88 mm) Net Weight: 10.9 oz. (310g) Package List 1 x F-Theta Field Lens 1 x Instructions

Air filters need to be replaced on their regular cycle to avoid clogs that can result in substandard air quality and equipment malfunctions. OMTech has you covered with a premium 3-in-1 filter. This single unit combines an F8 fiberglass layer for dust, a 1200 iodine activated carbon layer for unpleasant odors such as formaldehyde and benzene, and an H13 HEPA layer for fine particles—effectively tackling both particulate and gaseous pollutants in one pass. An exact filter for our OSP060 fume extractors, this unit permits quick and easy replacement to help extend your fume purifier's service life. Keep your 60W chugging along with this replacement filter set and keep your worksite as safe and clean as ever!

Faster shipping. Better service

Faster shipping. Better service

Faster shipping. Better service

Faster shipping. Better service

Faster shipping. Better service

Faster shipping. Better service

Precio bajo con envío gratis para usuario nuevo.

Precio bajo con envío gratis para usuario nuevo.

Faster shipping. Better service

Faster shipping. Better service