Pre-Owned OMTech Maker MF2028-100 100W CO2 Laser Cutter and Engraver with 20" x 28" Working Area - Excellent

Looking for a powerful and affordable way to start or expand your laser engraving business? The Pre-Owned OMTech Polar Lite 55W Desktop CO2 Laser Engraver and Cutter in Good condition is your smartest entry point. Available now at OMTech.com, this certified pre-owned machine delivers the same reliable performance as a brand new unit, but at a fraction of the cost. Every pre-owned Polar Lite is carefully inspected, repaired, and tested by OMTech Specialists at our Anaheim headquarters. While this unit may show some cosmetic wear or minor signs of previous use, it is fully operational and functions 100% as intended. You get the same powerful 55W CO2 laser tube capable of cutting through wood, acrylic, and leather, and engraving intricate designs with precision. Best of all, you save significantly compared to buying new, making this an unbeatable value for hobbyists, small business owners, and educators. This machine is OMTech Certified, meaning every component has passed a thorough QA inspection. You can trust that it is ready to work right out of the box. Plus, OMTech ensures safe shipping by securing the unit to a reinforced pallet with multiple layers of bubble wrap, so your investment arrives in dependable condition. Please note that financing is not available on pre-owned units, and the images shown are for reference only. For a realistic view of cosmetic condition, check our photo guide on the product page. Don't miss this chance to own a professional grade laser engraver at a budget friendly price. Grab your OMTech Polar Lite today at OMTech.com and start creating with confidence.

Give your creative projects a second chance with a smart investment. OMTech Laser brings you the Pre-Owned MF1624-60, a 60W CO2 laser engraver and cutting machine that delivers professional results without the premium price tag. With a generous 16 x 24 inch working area and a maximum engraving speed of 23.6 inches per second, this machine is built to handle a wide range of materials including wood, acrylic, leather, and glass. Every pre-owned unit is thoroughly inspected, repaired, and tested by OMTech Specialists at our Anaheim headquarters. While the machine may show some cosmetic wear, it functions 100 percent as intended, offering the same powerful performance as a brand new model. The 60W DC laser tube provides reliable cutting depth of up to 0.4 inches and an estimated service life of 2000 hours, especially when operated at lower settings. Designed for versatility, the MF1624-60 features front and back pass through doors to accommodate larger items with ease. The built in air assist keeps your workspace clean by removing smoke and dust, while the flame retardant viewing window and cover interlock system enhance safety during operation. This machine is compatible with RDWorks software and supports a wide variety of image formats, making it easy to integrate into your existing workflow. Each purchase includes a power cord, USB flash drive, USB and Ethernet cables, a wrench set, exhaust pipe, water pipes, and more. Depending on the condition grade you choose, your unit is backed by an OMTech Certified warranty ranging from one to three months on parts and tubes. Plus, you get a one time 45 minute virtual tech support session with our specialists in California. Take advantage of this opportunity to own a certified pre owned laser engraver from OMTech. Visit our website at https://omtech.com to explore current inventory and find the right machine for your workshop.

Give your creative workflow a powerful upgrade with the Pre-Owned OMTech Pronto 45 100W CO2 Laser Engraver and Cutter, now available with autofocus at OMTech Laser. This is your chance to own a high performance laser system at a significantly reduced price while still receiving the quality assurance you expect from OMTech. Every pre-owned unit is a Certified machine. It has been returned to our Ontario headquarters, where our specialists have fully repaired and tested every component. While the exterior might show some minor cosmetic wear from previous use, the heart of this machine functions 100% as intended. You get the same precise cutting and engraving power of a brand new model without the full investment. The 100W CO2 tube delivers impressive speed and depth, making it ideal for cutting thick acrylic, wood, and leather while handling detailed engraving on glass and stone. The built in autofocus feature saves you time by automatically adjusting the focal length, ensuring perfect results with every job. We take shipping seriously. Your unit is carefully secured to a reinforced pallet and wrapped in multiple layers of bubble wrap for a safe and dependable delivery. Please note that financing is not available for pre-owned units, but the savings make this an incredible value. Check the photo guide on the listing for typical condition examples. Bring home reliable, certified laser power today from OMTech.

Give your metal engraving projects a professional edge without paying full price. This Pre-Owned OMTech Galvo 30W Compact and Integrated Fiber Metal Engraving Machine offers the same powerful performance you expect from OMTech, but at a more accessible cost. Each pre-owned unit is thoroughly inspected, repaired, and tested by OMTech Specialists at our Anaheim headquarters to ensure it functions 100% as intended. While the machine may show some cosmetic wear from previous use, its core capabilities remain fully operational. This compact fiber laser engraver is built for speed and precision, working at up to 10,000 mm per second with accuracy down to 0.01 mm. It cuts through metals up to 0.08 mm in a single pass and is perfect for marking a wide range of materials including metal, plastic, and stone. The 30W laser source is rated for over 100,000 hours of use, making it a durable addition to your workshop. The 5.9 x 5.9 inch working area is ideal for smaller projects, and the dual red dot locators make calibration quick and easy. A rotary axis connection port is included, so you can engrave rings, bracelets, or other curved objects with ease. The machine is compatible with both EZCad and LightBurn software, giving you flexible control over your designs. This pre-owned unit ships safely from OMTech, carefully secured to a reinforced pallet with multiple layers of bubble wrap for dependable delivery. Please note that the images shown may not fully represent the cosmetic condition, but rest assured the machine is fully tested and ready to work. Bring your ideas to life with OMTech. Visit omtech.com to learn more.

Looking for serious laser power without the brand new price tag? This Pre-Owned OMTech Maker AF2028-80 90W CO2 Laser Cutter and Engraver delivers exceptional performance for your workshop or small business. With a generous 20 x 28 inch working area and an autofocus system, you get precision and efficiency right out of the box. This unit is rated in Good condition by our OMTech Specialists. It has been previously owned and returned to our Anaheim headquarters. Our team has thoroughly repaired and tested every component to ensure it functions 100% as intended. While the machine may have some cosmetic wear or signs of previous use, its operational performance is rock solid. This is a smart way to get top tier laser engraving and cutting capability at a reduced investment. The 90W CO2 laser tube handles a wide range of materials from wood and acrylic to leather and fabric. The autofocus feature saves you time on setup, letting you jump straight into your projects. Whether you are prototyping, producing custom signs, or running small batch production, this machine is built to deliver consistent results. Every Pre-Owned OMTech unit comes with our Certified QA inspection. We check each component for full operational performance before it ships. Your machine will be carefully secured to a reinforced pallet and wrapped in multiple layers of bubble wrap for safe delivery. Please note that financing is not available for pre owned units, and the images shown may not fully represent the cosmetic condition. Grab this reliable workhorse from OMTech and keep your projects moving forward.

Looking for professional laser marking power at a fraction of the cost? The Pre-Owned OMTech Galvo 50W Autofocus Fiber Laser Marking Machine delivers the same high performance you expect from OMTech, now available at a budget friendly price point. Every unit is returned to our Anaheim headquarters where our certified specialists thoroughly repair and test each machine to ensure it functions 100% as intended. Choose from three cosmetic conditions to fit your needs and budget. Great condition units show minimal signs of use while Good and Functional options may have more visible wear but still operate perfectly. All machines receive a full QA inspection and certification from OMTech, so you can trust in reliable performance for engraving metals, plastics, and more. The built in autofocus feature simplifies setup and speeds up your workflow. Please note that the listing images do not fully represent the cosmetic wear of each unit. We provide a photo guide showing examples from previous pre owned models to help you understand what to expect. Financing is not available for pre owned items, but the savings make this an excellent investment for growing your business. Your machine ships safely secured to a reinforced pallet with multiple layers of bubble wrap for dependable delivery. Experience OMTech quality and value with this certified pre owned fiber laser marking machine. Visit omtech.com to explore our full lineup of laser solutions.

Looking for a powerful fiber laser marker without the full price tag? This Pre-Owned OMTech Mopa Compact 60 delivers professional grade 60W engraving performance at a fraction of the cost. Each unit has been returned to our Ontario headquarters, thoroughly inspected, repaired, and tested by OMTech Specialists to ensure it functions 100% as intended. While there may be minimal cosmetic wear or signs of previous use, the internal components and laser performance are fully operational and certified reliable. Equipped with a JPT laser source rated for over 100,000 hours of use, this machine handles a wide range of materials including metals, plastics, stone, and more. The 5.9 x 5.9 inch working area gives you plenty of space for detailed projects, while the high speed galvanometric system engraves at up to 10,000 mm/s with pinpoint accuracy of 0.01 mm. Dual red dot locators make calibration fast and precise, so you can start creating right away. This fiber laser marker is compatible with both EZCad and LightBurn software, giving you flexible control over your workflow whether you use Windows or macOS. A rotary axis connection port is also included, allowing you to engrave curved items like rings and bracelets with ease. Safe shipping is a priority. Your unit will be carefully secured to a reinforced pallet and wrapped in multiple layers of bubble wrap for dependable delivery. Please note that images shown may not fully reflect the cosmetic condition of your specific unit. Financing is not available for pre owned models. Bring your ideas to life with OMTech. Visit us at omtech.com to learn more and secure your certified pre owned laser engraver today.

Financing is not available for pre-owned units Condition: Good: This machine has been previously used, returned to the Ontario headquarters, and repaired and tested by OMTech Specialists. The device may have some cosmetic wear and/or signs of use but is fully operational and functions 100% as intended. Great: This machine has been previously used, returned to the Ontario headquarters, and repaired and tested by OMTech Specialists. The device may have minimal signs of use but is fully operational and functions 100% as intended. Excellent: No longer want, the customer refused package, product is almost brand new. PLEASE NOTE: The images shown in this listing do not fully represent the cosmetic condition of the machine OMTech Certified: This machine has undergone a thorough QA inspection by an OMTech Specialist, and each component has been repaired and tested for full operational performance. Photo Guide: View condition examples of previous Pre-Owned models: Click Here Safe Shipping: This unit is carefully secured to a reinforced pallet and protected with several layers of bubble wrap for a dependable delivery. Features 50W Marking Laser: With a durable laser source that lasts up to over 100,000 hours, OMTech's fiber laser marking machine allows you to create a vibrant array of designs on various materials including metals, plastic, stone, and more Superfast Speed: Our fiber laser etching machine works at 10000 mm/s, cutting metals up to 0.1 mm with an accuracy of 0.01 mm to render intricate images perfectly. The high-speed galvanometric system allows quick scanning, engraving, and turnaround LightBurn Compatible: Our laser fiber engraver comes bundled with EZCad software and is fully compatible with LightBurn software, providing various customizable features and user-friendly controls to streamline your workflow and maximize productivity Spacious Work Area: This fiber laser marker provides an expansive 5.9x5.9 inch (150x150 mm) field with dual red dot locators for fast and exact calibration and focusing, letting you easily handle projects large or small Versatile Processing: This laser class 2 (0.874 mW output power) metal marking machine also features a rotary axis connection port, allowing you to engrave rings, bracelets, or other curved surfaces whenever needed. Simply plug and play Bring your ideas to life with OMTech's versatile fiber laser engravers! NOTE that this device has an open workbed. It comes with one pair of protective eyewear, but anyone else in the room with the device should also have their own laser glasses to avoid any possibility of injury from its beam. Specifications Material: Metal, Cast AluminumGalvanometer Source: Galvo-TechLaser Power: 50WEngraving Area: 5.9 x 5.9 in. (150x150 mm)Max. Engraving Speed: 394 ips (10000 mm/s)Max. Engraving Depth: 0.004 in. (0.1 mm)Engraving Accuracy: 0.01 mmLaser Wavelength: 1064 nmCompatible Software: LightBurn for Windows 7, 8, 10, 11, or macOSSupported Image Formats: .bmp, .gif, .jpg, .jpeg, .dxf, .dst, .aiEst. Laser Service Life: 100,000 hr.Dimensions: 15.8 x 13.4 x 21.3 in. (40x34x54 cm)Net Weight: 40 lb. (18 kg) Package List 1x Fiber Laser Engraver1x Tool Box1x Protective Eyewear1x USB Flash Drive1x Ruler1x USB Cable1x Set of Hex Wrenches1x Instruction Manual

Financing is not available for pre-owned units Condition: Functional: This machine has been previously owned, returned to the Anaheim headquarters, and repaired and tested by OMTech Specialists. The device may have some signs of cosmetic wear and/or structural damage, but is fully operational and functions 100% as intended. Good: This machine has been previously used, returned to the Anaheim headquarters, and repaired and tested by OMTech Specialists. The device may have some cosmetic wear and/or signs of use but is fully operational and functions 100% as intended. Great: This machine has been previously used, returned to the Anaheim headquarters, and repaired and tested by OMTech Specialists. The device has minimal signs of use but is fully operational and functions 100% as intended. Excellent: No longer want, the customer refused package, product is almost brand new. PLEASE NOTE: The images shown in this listing do not fully represent the cosmetic condition of the machine. OMTech Certified: This machine has undergone a thorough QA inspection by an OMTech Specialist, and each component has been repaired and tested for full operational performance. Photo Guide: View condition examples of previous Pre-Owned models: Click Here Safe Shipping: This unit is carefully secured to a reinforced pallet and protected with several layers of bubble wrap for a dependable delivery. Features 30W COLOR LASER: This 30W JPT MOPA fiber laser marking machine by OMTech will allow you to bring your ideas to life with greater speed, precision, and versatility than ever before; adjustable pulse frequency and width permit a rainbow of colorful designs on stainless steel and high contrast marking of anodized aluminum; with an MTTF over 100,000 hours, this durable laser cuts up to 0.05 mm on each pass at an accuracy of ±1 micron to render your most intricate images perfectly PRECISION OPTICS: This metal laser engraver's high-speed galvanometric system gives you extreme stability for quick scanning, engraving, and turnaround; make your mark at frequencies from 1-4000kHz on gemstones, silicon, steel, aluminum, brass, and more as the compact Fθ field lens uses its air-spaced design and protective and anti-reflective coatings to provide clean throughput with less than 1% distortion 175x175mm WORK AREA: Our 30W fiber laser cutter provides an expansive 175x175mm (6.9x6.9 inch) field with a red dot locator for fast and exact calibration and focusing; the workbed's built-in grid facilitates positioning bars that can be used to hold your material in just the right spot every time as the laser works its magic at speeds up to 275.6 ips (7000 mm/s); and one pair of protective eyewear comes included to help handle the open design EASY OPERATION: This laser cutting and engraving tool comes bundled with EzCad2 software compatible with 32 and 64-bit editions of Windows XP, Vista, 7, 8, and 10 and a wide range of image formats; the included footpad trigger keeps batch work humming along; and when you need to engrave rings, bracelets, or other curved surfaces, your rotary axis attachment (not incl.) can be easily connected using the plug-and-play 4-pin connection port SUPERIOR SUPPORT & SERVICE: From garage artists to backyard businesses to professional jewelers and workshops, the OMTech community continues to grow thanks to our passionate dedication to making quality engraving available to all; order your own fiber engraver today and enjoy fast US-based shipping Bring your ideas to life with OMTech's versatile fiber laser engravers! This 30W split fiber laser engraver is your professional resource for engraving words, logos, pictures, barcodes, and more on metal (including personalized gold and silver jewelry!) and other materials with a quick turnaround and perfect accuracy. Our device's state-of-the-art JPT air-cooled MOPA fiber laser avoids the tetchiness, fragility, and water-based mess of CO2 laser tubes. Instead, it provides solid-state efficiency, quality, stability, and durability for its entire service life of 100,000 hours. The optical amplifier boosts the beam produced by the master oscillator, with independently adjustable pulse frequency and width to offer incredible versatility applicable to a wide range of materials, ideal for colorful markings on stainless steel and high contrast aluminum etching. The Galvo-Tech galvanometric system and compact Fθ field lens ensure quick work with less than 1% distortion from your design. The built-in workspace grid and laser locators make calibrating everything fast and easy. Rotary axes are not included but plug-and-play connection is provided for units with 4-pin connections to mark curved surfaces such as gold and silver rings and bracelets. The desktop laser engraver is operated from the bundled edition of EzCad2, compatible with 32 and 64-bit editions of Windows XP, Vista, 7, 8, and 10. Of course, this fiber marking machine ships with abundant insulation and padding to ensure it arrives at your door like it just came off the factory floor. For all your projects cutting and marking metals, gems, silicon, and more, you can do no better. NOTE that this device has an open workbed. It comes with one pair of protective eyewear, but anyone else in the room with the device should also have their own laser glasses to avoid any possibility of injury from its beam. Specifications Laser Source: JPT Galvanometer Source: Galvo-Tech Output Power: 30W Laser Wavelength: 1064 nm Laser Frequency: 1-4000 kHz Pulse Width: 2-500 ns Min. Beam Quality: 1.4 Engraving Area: 6.9 x 6.9 in. (175x175 mm) Max. Engraving Speed: 275.6 ips (7000 mm/s) Max. Engraving Depth: 0.002 in. (0.05 mm) Positioning Accuracy: ±0.000004 in. (±0.1 μm) Est. Laser Service Life (MTTF): 100,000 hr. Cooling System: Air Cooling Operating Software: EzCad2 for Windows XP, Vista, 7, 8, or 10 (32/64 bit) Supported Image Formats: .ai, .bmp, .dx, .dxf, .gif, .jpg, .plt, .png, .tga, .tif Net Weight: 64 lb. (29 kg) Package Dimensions: 18 x 30.7 x 31 in. (46x78x79 cm) Package Weight: 118 lb. (53.5 kg) Package List 1 x 30W MOPA Fiber Laser Engraver 2 x Positioning Bars 4 x Attaching Bolts 1 x Tape Measure 1 x USB Flash Drive with Software 1 x Protective Eyewear 1 x Foot Switch 1 x Power Cable 1 x Set of Hex Wrenches 1 x Tool Box 1 x Instruction Manual

Financing is not available for pre-owned units Condition: Functional: This machine has been previously owned, returned to the Anaheim headquarters, and repaired and tested by OMTech Specialists. The device may have some signs of cosmetic wear and/or structural damage, but is fully operational and functions 100% as intended. Good: This machine has been previously used, returned to the Anaheim headquarters, and repaired and tested by OMTech Specialists. The device may have some cosmetic wear and/or signs of use but is fully operational and functions 100% as intended. Great: This machine has been previously used, returned to the Anaheim headquarters, and repaired and tested by OMTech Specialists. The device has minimal signs of use but is fully operational and functions 100% as intended. PLEASE NOTE: The images shown in this listing do not fully represent the cosmetic condition of the machine. OMTech Certified: This machine has undergone a thorough QA inspection by an OMTech Specialist, and each component has been repaired and tested for full operational performance. Photo Guide: View condition examples of previous Pre-Owned models: Click Here Safe Shipping: This unit is carefully secured to a reinforced pallet and protected with several layers of bubble wrap for a dependable delivery.

Financing is not available for pre-owned units Condition: Functional: This machine has been previously owned, returned to the Anaheim headquarters, and repaired and tested by OMTech Specialists. The device may have some signs of cosmetic wear and/or structural damage, but is fully operational and functions 100% as intended. Good: This machine has been previously used, returned to the Ontario headquarters, and repaired and tested by OMTech Specialists. The device may have some cosmetic wear and/or signs of use but is fully operational and functions 100% as intended. Great: This machine has been previously used, returned to the Ontario headquarters, and repaired and tested by OMTech Specialists. The device may have minimal signs of use but is fully operational and functions 100% as intended. Excellent: No longer want, the customer refused package, product is almost brand new. PLEASE NOTE: The images shown in this listing do not fully represent the cosmetic condition of the machine. OMTech Certified: This machine has undergone a thorough QA inspection by an OMTech Specialist, and each component has been repaired and tested for full operational performance. Photo Guide: View condition examples of previous Pre-Owned models: Click Here Safe Shipping: This unit is carefully secured to a reinforced pallet and protected with several layers of bubble wrap for a dependable delivery.

Financing is not available for pre-owned units Important Resources and downloads: Visit this machine in person: Book Here Download the Manual Download the RDworks software NOTE: Does not include LightBurn Software Replacement: Laser Tube, Power Supply, Mirrors, Lens Condition: Functional: This machine has been previously owned, returned to the Anaheim headquarters, and repaired and tested by OMTech Specialists. The device may have some signs of cosmetic wear and/or structural damage, but is fully operational and functions 100% as intended. Good: This machine has been previously used, returned to the Ontario headquarters, and repaired and tested by OMTech Specialists. The device may have some cosmetic wear and/or signs of use but is fully operational and functions 100% as intended. Great: This machine has been previously used, returned to the Ontario headquarters, and repaired and tested by OMTech Specialists. The device may have minimal signs of use but is fully operational and functions 100% as intended. Excellent: No longer want, the customer refused package, product is almost brand new. PLEASE NOTE: The images shown in this listing do not fully represent the cosmetic condition of the machine. OMTech Certified: This machine has undergone a thorough QA inspection by an OMTech Specialist, and each component has been repaired and tested for full operational performance. Photo Guide: View condition examples of previous Pre-Owned models: Click Here Safe Shipping: This unit is carefully secured to a reinforced pallet and protected with several layers of bubble wrap for a dependable delivery. Convenient Size: 34.5” x 54.5” (875 x 1385mm) engraving/cutting area 79” x 61” x 39” (200 x 154 x 100cm) overall dimensions Net Weight 750 lbs. (340 kg) Tackle large-scale projects with ease An adjustable stabilizing base allows easy height adjustment. Specs: Engraving speed: 100 - 600 mm/s Cutting speed: 1 - 40mm/s (actual speed depends on material) 20mm Focal lens diameter 2" Focal length 25mm Mirror diameter Resolution up to 2540 dpi 7” Standard Z-depth (Workspace height with honeycomb bed installed and laser head half retracted) 8” Max Z-depth (Workspace height with honeycomb bed removed, knife bed in use, and laser head fully retracted upwards) Compatibility: The Ruida control board works seamlessly with RDWorks for Windows PC (included) and LightBurn (not included) RDWorks (included) and LightBurn (not included) are compatible with Windows 7, 8, 10 (64/32 bit), XP, 2000, and Vista. The Ruida controller is compatible with macOS (Version 10.11 and higher) ONLY if you use LightBurn software (not included) Photo-ready to convert images from HPLG, BMP, GIF, JPG, JPEG, DXF, DST, AI formats, and more into .RD files for laser processing. 4-Pin Port connection for rotary axis devices. *Honeycomb bed and the knife bed removal required for 4 Wheel Rotary or Jaw Chuck rotary device use Power: The integrated power supply features increased response speed, performance, and cutting power — it’s beaming with possibilities! Cut up to 12 mm (½″) thick plywood and acrylic/plexiglass Uses standard 110V AC power connection Laser Tube Lifetime: 130W CO2 laser tube with an estimated lifetime of up to 12,000 operation hours depending on power setting usage and water cooling performance PLEASE NOTE: Frequent use of high laser power settings will shorten the laser tube lifetime as follows: Low Power 10–40% = 11,000–12,000 Hours Moderate Power 40–70% = 9,000–10,000 Hours High Power 70–100% = 6,000–7,000 Hours Average Parameter Settings: Click Here Cutting Edge Features: SUPERIOR LASER POWER: This laser engraving and cutting machine comes with a YL 130W CO2 laser tube to cut through thicker materials and engrave your designs faster, deeper, and clearer. RUIDA DIGITAL CONTROLLER: The intuitive control panel with a digital display allows complete control of the laser head, pausing and stopping projects, adjusting laser power and speed settings, file viewing, and project framing via Windows-compatible RDWorks v8. USB & ETHERNET PORTS: 2 USB ports allow flash drive connectivity and a USB-to-USB PC connection. Plus, the ethernet connection is compatible with PCs. LCD DISPLAY: A secondary display panel monitors the real-time electric current in milliamps and auto-judges fault, easing the troubleshooting process and reducing potential damage to the laser tube and power supply. Plus, it’s accessibly located on the left side of the machine. LINEAR RAIL GUIDING SYSTEM: Equipped with X, Y, and Z stepper motors for efficient power transmission between the guide rails with high precision and long service life. MOTORIZED AUTOFOCUS WORKBED: The autofocus pen senses the correct focus distance from the laser head to the target material and signals the Z-axis motor to automatically raise or lower the workbed to the perfect focus height. VIEWING WINDOW: A transparent acrylic glass viewing window allows observation throughout the laser engraving process. Plus, it’s equipped with a sepia tint to protect your eyes from indirect laser beam exposure. RED DOT GUIDANCE: A red dot pointer mounted on the laser head quickly indicates engraving points, marks the machine’s path, and identifies positioning sizes, allowing an effortless project setup process. ADJUSTABLE LASER NOZZLE: The laser nozzle can extend downwards up to 1.75” or be fully retracted, allowing more control over different focal distance setups. AIR ASSIST: A pre-installed air compressor guides a pressurized air stream through the laser head nozzle to displace debris, heat, and combustible gases from the engraving surface and laser beam path, keeping your workbed cleaner and engravings more precise. FOUR-WAY PASS-THROUGH: There’s always extra room! Equipped with front, side, and rear pass-through doors to accommodate materials larger than the table size. Front-to-Back Doors: 58.5"W x 1.88"H, Side-to-Side Doors: 38"W x 0.75"H BUILT-IN VENTILATION: A pre-installed vent fan expels smoke and fumes to create a safer workspace and extend the service life of your machine. WATER FLOW SENSOR: A pressure flow sensor monitors water flow throughout the laser engraving process and prevents the laser from firing if water stops circulating through the laser tube. AUTOMATIC SHUTDOWN: The auto-shutdown safety feature stops the machine when opening the transparent window cover. Once closed, press the “Enter” button to continue operation. EFFORTLESS CLEANUP: A debris collection system below the workbed funnels engraving debris into a removable collection tray, helping maintain your machine’s cleanliness and easing the cleanup process. Package Includes: 1 x Laser Engraver Machine 10 x Hex Wrenches 1 x USB Type-A to Type-A Cable 1 x Ethernet to Ethernet Cable 1 x Power Cord 1 x Tube of Silicone Insulation 1 x Roll of Double-Sided Tape 1 x Venting Exhaust Duct (4 ft. max. length) 1 x Hose Clamp 2 x Water Hoses 2 x Keys 1 x 4G USB Drive with Software 1 x Accessory Bag 1 x Instruction Manual OMTech Certified Warranty: Great: 1-year warranty on machine parts and hardware, 3-month warranty on laser tubes and power supplies Good: 6-month warranty on machine parts and hardware, 3-month warranty on laser tubes and power supplies Functional: 3-month warranty on machine parts and hardware, 1-month warranty on laser tubes and power supplies Certifications: FDA Compliant CE Certification ISO9001 Quality Certification One 45-minute Virtual Tech Support appointment with OMTech Specialists in Anaheim, California Compatible Materials: Laser Cutting: Acrylic *Wood Leather Plastics Fabrics MDF Cardboard Paper Corian Foam Fiberglass Rubber Marking/Engraving: Acrylic Wood Leather Plastics Fabrics Glass Rubber Cork Brick Granite Marble Tile River Rock Bone Melamine Phenolic *Aluminum *Stainless Steel *Titanium *Cannot cut hardwoods like mahogany *CO2 lasers only mark bare metals when anodized or treated. Contact us with questions on specific materials not listed, we can process a sample for confirmation. Some PVC-based acrylics can create toxic fumes when lasered.

Financing is not available for pre-owned units Condition: Functional: This machine has been previously owned, returned to the Anaheim headquarters, and repaired and tested by OMTech Specialists. The device may have some signs of cosmetic wear and/or structural damage, but is fully operational and functions 100% as intended. Good: This machine has been previously used, returned to the Anaheim headquarters, and repaired and tested by OMTech Specialists. The device may have some cosmetic wear and/or signs of use but is fully operational and functions 100% as intended. Great: This machine has been previously used, returned to the Anaheim headquarters, and repaired and tested by OMTech Specialists. The device has minimal signs of use but is fully operational and functions 100% as intended. PLEASE NOTE: The images shown in this listing do not fully represent the cosmetic condition of the machine. OMTech Certified: This machine has undergone a thorough QA inspection by an OMTech Specialist, and each component has been repaired and tested for full operational performance. Photo Guide: View condition examples of previous Pre-Owned models: Click Here Safe Shipping: This unit is carefully secured to a reinforced pallet and protected with several layers of bubble wrap for a dependable delivery. FEATURES · Design, Engrave, & Impress: OMTech's 150W CO2 laser engraver cuts and engraves as deep as 0.4" on various nonmetallic materials such as wood, glass, acrylic, leather, and more. With speeds up to 23.6 ips, it transforms your artistic visions into realities that draw wows and aahs. · Get Right to Work with Autofocus: No more struggling with manual adjustments or guesswork. This laser engraving machine's workbeds adjust up and down at the touch of a button and the preinstalled autofocus will automatically find the right focal distance for you. · Handle Large Items with Ease: The honeycomb and aluminum blade beds feature a 40"x63" work area to fit most projects. The three-way pass-through doors make it a breeze to cut on larger and longer items. · Dive into Work with Confidence: The high-performance Yongli A8s tube delivers 150W of power for up to 7,000 hours of usage and extends its lifespan when consistently used at lower settings. · Experience Safe & Clean Laser Cutting: The widened viewing window is made from flame retardant material to ensure lasting safe use, while the built-in air assist efficiently removes smoke and dust to protect your laser lenses and reflective mirrors. · Enjoy US-Based Support & Service: OMTech is dedicated to providing quality engraving available to all, from garage artists to backyard businesses and professional workshops; order your own engraver today and enjoy fast US-based shipping, a strong 2 year general warranty (6 months for tube & power supply), and ever helpful customer service and tech support. Specifications Color: Blue, Gray Dimensions: 86.6 x 60.6 x 37 in. (220x154x94 cm) Engraving Area: 40 x 63 in. (1000x1600 mm) Front & Back Pass-Through Size: 67 x 2 in. (1700x50 mm) Side Pass-Through Size: 42.1 x 0.8 in. (1070x20 mm) Rated Power: 150W Est. Service Life: 12,000 hr. Max. Engraving Speed: 23.6 ips (600 mm/s) Max. Engraving Depth: 0.4 in. (10 mm) Laser Tube Length: 72.8 in. (1850 mm) Laser Tube Diameter: 3.2 in. (80 mm) Compatible Operating Systems: Windows 2000, XP, Vista, 7, 8, 10 Bundled Software: RDWorks Compatible Software (not incl.): LightBurn, CorelDRAW, AutoCAD Supported Image Formats: .ai, .bmp, .dxf, .gif, .hpgl, .jpeg, .pdf, .plt, .png, .rd, .svg, .tiff, .tga Data Transmission: USB Cable, Ethernet Cable, USB Flash Drive, Offline Certification: CE, FDA Net Weight: 816 lb. (370 kg) Package List 1x 150W CO2 Laser Engraver 2x Power Cords 1x USB Flash Drive 1x USB Cable 1x Ethernet Cable 1x Double-Sided Tape 1x Wrench Set 1x Tube of Silicone Insulation 1x Ceramic Resistor 1x Exhaust Pipe 1x Pipe Clamp 2x Water Pipes 1x Wire Set 4x Keys 1x User Manual OMTech Certified Warranty: Great: 1-year warranty on machine parts and hardware, 3-month warranty on laser tubes and power supplies Good: 6-month warranty on machine parts and hardware, 3-month warranty on laser tubes and power supplies Functional: 3-month warranty on machine parts and hardware, 1-month warranty on laser tubes and power supplies Certifications: FDA Compliant CE Certification ISO9001 Quality Certification One 45-minute Virtual Tech Support appointment with OMTech Specialists in Anaheim, California Compatible Materials: Laser Cutting: Acrylic *Wood Leather Plastics Fabrics MDF Cardboard Paper Corian Foam Fiberglass Rubber Marking/Engraving: Acrylic Wood Leather Plastics Fabrics Glass Rubber Cork Brick Granite Marble Tile River Rock Bone Melamine Phenolic *Aluminum *Stainless Steel *Titanium *Cannot cut hardwoods like mahogany *CO2 lasers only mark bare metals when anodized or treated. Contact us with questions on specific materials not listed, we can process a sample for confirmation. Some PVC-based acrylics can create toxic fumes when lasered.

Financing is not available for pre-owned units Condition: Great: This machine has been previously used, returned to the Ontario headquarters, and repaired and tested by OMTech Specialists. The device may have minimal signs of use but is fully operational and functions 100% as intended. PLEASE NOTE: The images shown in this listing do not fully represent the cosmetic condition of the machine. OMTech Certified: This machine has undergone a thorough QA inspection by an OMTech Specialist, and each component has been repaired and tested for full operational performance. Photo Guide: View condition examples of previous Pre-Owned models: Click Here Safe Shipping: This unit is carefully secured to a reinforced pallet and protected with several layers of bubble wrap for a dependable delivery.

Financing is not available for pre-owned units Condition: Good: This machine has been previously used, returned to the Ontario headquarters, and repaired and tested by OMTech Specialists. The device may have some cosmetic wear and/or signs of use but is fully operational and functions 100% as intended. Great: This machine has been previously used, returned to the Ontario headquarters, and repaired and tested by OMTech Specialists. The device may have minimal signs of use but is fully operational and functions 100% as intended. PLEASE NOTE: The images shown in this listing do not fully represent the cosmetic condition of the machine. OMTech Certified: This machine has undergone a thorough QA inspection by an OMTech Specialist, and each component has been repaired and tested for full operational performance. Photo Guide: View condition examples of previous Pre-Owned models: Click Here Safe Shipping: This unit is carefully secured to a reinforced pallet and protected with several layers of bubble wrap for a dependable delivery.

Financing is not available for pre-owned units Condition: Good: This machine has been previously used, returned to the Ontario headquarters, and repaired and tested by OMTech Specialists. The device may have some cosmetic wear and/or signs of use but is fully operational and functions 100% as intended. Great: This machine has been previously used, returned to the Ontario headquarters, and repaired and tested by OMTech Specialists. The device may have minimal signs of use but is fully operational and functions 100% as intended. PLEASE NOTE: The images shown in this listing do not fully represent the cosmetic condition of the machine. OMTech Certified: This machine has undergone a thorough QA inspection by an OMTech Specialist, and each component has been repaired and tested for full operational performance. Photo Guide: View condition examples of previous Pre-Owned models: Click Here Safe Shipping: This unit is carefully secured to a reinforced pallet and protected with several layers of bubble wrap for a dependable delivery.

Financing is not available for pre-owned units Condition: Functional: This machine has been previously owned, returned to the Anaheim headquarters, and repaired and tested by OMTech Specialists. The device may have some signs of cosmetic wear and/or structural damage, but is fully operational and functions 100% as intended. Good: This machine has been previously used, returned to the Ontario headquarters, and repaired and tested by OMTech Specialists. The device may have some cosmetic wear and/or signs of use but is fully operational and functions 100% as intended. Great: This machine has been previously used, returned to the Ontario headquarters, and repaired and tested by OMTech Specialists. The device may have minimal signs of use but is fully operational and functions 100% as intended. Excellent: No longer want, the customer refused package, product is almost brand new. PLEASE NOTE: The images shown in this listing do not fully represent the cosmetic condition of the machine. OMTech Certified: This machine has undergone a thorough QA inspection by an OMTech Specialist, and each component has been repaired and tested for full operational performance. Photo Guide: View condition examples of previous Pre-Owned models: Click Here Safe Shipping: This unit is carefully secured to a reinforced pallet and protected with several layers of bubble wrap for a dependable delivery.

Financing is not available for pre-owned units Condition: Good: This machine has been previously used, returned to the Ontario headquarters, and repaired and tested by OMTech Specialists. The device may have some cosmetic wear and/or signs of use but is fully operational and functions 100% as intended. Great: This machine has been previously used, returned to the Ontario headquarters, and repaired and tested by OMTech Specialists. The device may have minimal signs of use but is fully operational and functions 100% as intended. Excellent: No longer want, the customer refused package, product is almost brand new. PLEASE NOTE: The images shown in this listing do not fully represent the cosmetic condition of the machine. OMTech Certified: This machine has undergone a thorough QA inspection by an OMTech Specialist, and each component has been repaired and tested for full operational performance. Photo Guide: View condition examples of previous Pre-Owned models: Click Here Safe Shipping: This unit is carefully secured to a reinforced pallet and protected with several layers of bubble wrap for a dependable delivery.

Financing is not available for pre-owned units Condition: Functional: This machine has been previously owned, returned to the Anaheim headquarters, and repaired and tested by OMTech Specialists. The device may have some signs of cosmetic wear and/or structural damage, but is fully operational and functions 100% as intended. Good: This machine has been previously used, returned to the Ontario headquarters, and repaired and tested by OMTech Specialists. The device may have some cosmetic wear and/or signs of use but is fully operational and functions 100% as intended. Great: This machine has been previously used, returned to the Ontario headquarters, and repaired and tested by OMTech Specialists. The device may have minimal signs of use but is fully operational and functions 100% as intended. Excellent: No longer want, the customer refused package, product is almost brand new. PLEASE NOTE: The images shown in this listing do not fully represent the cosmetic condition of the machine. OMTech Certified: This machine has undergone a thorough QA inspection by an OMTech Specialist, and each component has been repaired and tested for full operational performance. Photo Guide: View condition examples of previous Pre-Owned models: Click Here Safe Shipping: This unit is carefully secured to a reinforced pallet and protected with several layers of bubble wrap for a dependable delivery.

Financing is not available for pre-owned units Condition: Good: This machine has been previously used, returned to the Ontario headquarters, and repaired and tested by OMTech Specialists. The device may have some cosmetic wear and/or signs of use but is fully operational and functions 100% as intended. Great: This machine has been previously used, returned to the Ontario headquarters, and repaired and tested by OMTech Specialists. The device may have minimal signs of use but is fully operational and functions 100% as intended. Excellent: No longer want, the customer refused package, product is almost brand new. PLEASE NOTE: The images shown in this listing do not fully represent the cosmetic condition of the machine. OMTech Certified: This machine has undergone a thorough QA inspection by an OMTech Specialist, and each component has been repaired and tested for full operational performance. Photo Guide: View condition examples of previous Pre-Owned models: Click Here Safe Shipping: This unit is carefully secured to a reinforced pallet and protected with several layers of bubble wrap for a dependable delivery. Important Resources and downloads: Visit this machine in person: Book Here Download the Manual Download the RDworks software NOTE: Does not include LightBurn Software Replacement: Laser Tube, Power Supply, Mirrors, Lens Convenient Size: 19.5” x 27.5” (500 x 700mm) engraving/cutting area 47” x 34” x 37” (119 x 86 x 91cm) overall dimensions (Length= 67" when include tube protector) Net Weight 330.7 lb. (150 kg) Tackle larger projects with ease The detachable base allows you to transport the machine through smaller door frames. Specs: Recommended engraving speed: 100 - 500mm/s Recommended cutting speed: 1 - 30mm/s (actual speed depends on material) 18mm Focal lens diameter 2" Focal length 25mm Mirror diameter Resolution up to 2540 dpi 10” Standard Z-depth (Workspace height with honeycomb bed installed and laser head half retracted) 11” Max Z-depth (Workspace height with honeycomb bed removed, knife bed in use, and laser head fully retracted upwards) Compatibility: The Ruida control board works seamlessly with RDWorks for Windows PC (included) and LightBurn (not included) RDWorks (included) and LightBurn (not included) are compatible with Windows 7, 8, 10 (64/32 bit), XP, 2000, and Vista. The Ruida controller is compatible with macOS (Version 10.11 and higher) ONLY if you use LightBurn software (not included) Photo-ready to convert images from HPLG, BMP, GIF, JPG, JPEG, DXF, DST, AI formats, and more into .RD files for laser processing. 4-Pin Port connection for rotary axis devices. Power: The integrated power supply features increased response speed, performance, and cutting power — it’s beaming with possibilities! A secondary LCD display panel monitors the electric current and auto-judges fault, reducing potential damage to the laser tube and power supply. Cut up to 10 mm (⅖″) thick acrylic/plexiglass Uses standard 110V AC power connection Laser Tube Lifetime: 100W CO2 laser tube with an estimated lifetime of up to 8,000 operation hours depending on power setting usage and water cooling performance PLEASE NOTE: Frequent use of high laser power settings will shorten the laser tube lifetime as follows: Low Power 10–40% = 7,000–8,000 Hours Moderate Power 40–70% = 5,000–6,500 Hours High Power 70–100% = 3,000–4,000 Hours Average Parameter Settings: Click Here Cutting Edge Features: HIGH LASER POWER: This laser engraving and cutting machine comes with a 100W CO2 laser tube to cut through thicker materials and engrave your designs faster, deeper, and clearer. RUIDA DIGITAL CONTROLLER: The intuitive control panel with digital display allows adjustment of laser head positions and power dimensions, as well as document viewing and final image edits. LINEAR RAIL GUIDING SYSTEM: Equipped with X and Y stepper motors for efficient power transmission between the guide rails with high precision and long service life. VIEWING WINDOW: A transparent acrylic glass viewing window allows observation throughout the laser engraving process. Plus, it’s equipped with a sepia tint to protect your eyes from indirect laser beam exposure. RED DOT GUIDANCE: A red dot pointer mounted on the laser head quickly indicates engraving points, marks the machine’s path, and identifies positioning sizes, allowing an effortless project setup process. ADJUSTABLE LASER NOZZLE: The laser nozzle can extend downwards up to 1.75” or be fully retracted, allowing more control over different focal distance setups. AIR ASSIST: A pre-installed air compressor guides a pressurized air stream through the laser head nozzle to displace debris, heat, and combustible gases from the engraving surface and laser beam path, keeping your workbed cleaner and engravings more precise. TWO-WAY PASS-THROUGH: There’s always extra room! Equipped with 29"W x 3.75"H front and rear pass-through doors to accommodate materials larger than the table size. BUILT-IN VENTILATION: A pre-installed vent fan expels smoke and fumes to create a safer workspace and extend the service life of your machine. WATER COOLING SYSTEM: Pre-installed hoses along with the included water pump allow for a fast and easy setup. Only use with distilled water, ensuring it stays between 60–70°F (16–21°C). WATER FLOW SENSOR: A pressure flow sensor monitors water flow throughout the laser engraving process and prevents the laser from firing if water stops circulating through the laser tube. AUTOMATIC SHUTDOWN: The auto-shutdown safety feature stops the machine when opening the transparent window cover. Once closed, press the “Enter” button to continue operation. Package Includes: 1 x Laser Engraver Machine 1 x Water Pump 1 x Ethernet to Ethernet Cable 1 x Grounding Wire 1 x Venting Exhaust Duct (4 ft. max. length) 2 x Water Hoses 1 x User Manual (English) 1 x USB Type-A to Type-A Cable 1 x USB Drive with Software 1 x Stainless Steel Clamp 10 x Allen Wrenches 1 x Double-sided Tape 1 x Power Cord 1 x Accessory Bag 2 x Keys 1 x Silicone Sealant Warranty: No need to worry! We offer a 2-year parts warranty on all machines. 1-year warranty on laser tubes and laser power supplies 80W and up Certifications: FDA Compliant CE Certification ISO9001 Quality Certification One 45-minute Virtual Tech Support appointment with OMTech Specialists in Anaheim, California Compatible Materials: Laser Cutting: Acrylic *Wood Leather Plastics Fabrics MDF Cardboard Paper Corian Foam Fiberglass Rubber Marking/Engraving: Acrylic Wood Leather Plastics Fabrics Glass Rubber Cork Brick Granite Marble Tile River Rock Bone Melamine Phenolic *Aluminum *Stainless Steel *Titanium *Cannot cut hardwoods like mahogany *CO2 lasers only mark bare metals when anodized or treated. Contact us with questions on specific materials not listed, we can process a sample for confirmation. Some PVC-based acrylics can create toxic fumes when lasered.

Financing is not available for pre-owned units Condition: Good: This machine has been previously used, returned to the Ontario headquarters, and repaired and tested by OMTech Specialists. The device may have some cosmetic wear and/or signs of use but is fully operational and functions 100% as intended. Great: This machine has been previously used, returned to the Ontario headquarters, and repaired and tested by OMTech Specialists. The device may have minimal signs of use but is fully operational and functions 100% as intended. Excellent: No longer want, the customer refused package, product is almost brand new. PLEASE NOTE: The images shown in this listing do not fully represent the cosmetic condition of the machine. OMTech Certified: This machine has undergone a thorough QA inspection by an OMTech Specialist, and each component has been repaired and tested for full operational performance. Photo Guide: View condition examples of previous Pre-Owned models: Click Here Safe Shipping: This unit is carefully secured to a reinforced pallet and protected with several layers of bubble wrap for a dependable delivery. Features 50W Marking Laser: With a durable laser source that lasts up to over 100,000 hours, OMTech's fiber laser marking machine allows you to create a vibrant array of designs on various materials including metals, plastic, stone, and more Superfast Speed: Our fiber laser etching machine works at 10000 mm/s, cutting metals up to 0.1 mm with an accuracy of 0.01 mm to render intricate images perfectly. The high-speed galvanometric system allows quick scanning, engraving, and turnaround LightBurn Compatible: Our laser fiber engraver comes bundled with EZCad software and is fully compatible with LightBurn software, providing various customizable features and user-friendly controls to streamline your workflow and maximize productivity Spacious Work Area: This fiber laser marker provides an expansive 5.9x5.9 inch (150x150 mm) field with dual red dot locators for fast and exact calibration and focusing, letting you easily handle projects large or small Versatile Processing: This laser class 2 (0.874 mW output power) metal marking machine also features a rotary axis connection port, allowing you to engrave rings, bracelets, or other curved surfaces whenever needed. Simply plug and play Bring your ideas to life with OMTech's versatile fiber laser engravers! NOTE that this device has an open workbed. It comes with one pair of protective eyewear, but anyone else in the room with the device should also have their own laser glasses to avoid any possibility of injury from its beam. Specifications Material: Metal, Cast AluminumGalvanometer Source: Galvo-TechLaser Power: 50WEngraving Area: 5.9 x 5.9 in. (150x150 mm)Max. Engraving Speed: 394 ips (10000 mm/s)Max. Engraving Depth: 0.004 in. (0.1 mm)Engraving Accuracy: 0.01 mmLaser Wavelength: 1064 nmCompatible Software: LightBurn for Windows 7, 8, 10, 11, or macOSSupported Image Formats: .bmp, .gif, .jpg, .jpeg, .dxf, .dst, .aiEst. Laser Service Life: 100,000 hr.Dimensions: 15.8 x 13.4 x 21.3 in. (40x34x54 cm)Net Weight: 40 lb. (18 kg) Package List 1x Fiber Laser Engraver1x Tool Box1x Protective Eyewear1x USB Flash Drive1x Ruler1x USB Cable1x Set of Hex Wrenches1x Instruction Manual