Machine Thread Tapping Nano Coating Tap Cobalt High Speed Steel Special Screw Tip Bit(M4x0.7 Tip)

Straight Flute Tap: 1-1/8-12 UNF, 4 Flute, Taper Chamfer, 3B Class of Fit, High-Speed Steel, Bright/Uncoated Finish | Hertel Straight Flute Tap: 1-1/8-12 UNF, 4 Flute, Taper Chamfer, 3B Class of Fit, High-Speed Steel, Bright/Uncoated Finish - 5-7/16" OAL, Right Hand, H4

Spiral Point Tap: M12x1.75 Metric Coarse, 3 Flutes, Plug Chamfer, 6H Class of Fit, HSS, Bright/Uncoated Coated | Value Collection Spiral Point Tap: M12x1.75 Metric Coarse, 3 Flutes, Plug Chamfer, 6H Class of Fit, HSS, Bright/Uncoated Coated - 1-21/32" Thread Length, Right Hand, D6

Straight Flute Tap: M30x2 Metric Fine, 4 Flute, Bottoming Chamfer, High-Speed Steel, Bright/Uncoated Finish | Hertel Straight Flute Tap: M30x2 Metric Fine, 4 Flute, Bottoming Chamfer, High-Speed Steel, Bright/Uncoated Finish - 2-9/16" Thread Length, 5-7/16" OAL, Right Hand, D5

Straight Flute Tap: M30x3.5 Metric Coarse, 4 Flute, Plug Chamfer, High-Speed Steel, Bright/Uncoated Finish | Hertel Straight Flute Tap: M30x3.5 Metric Coarse, 4 Flute, Plug Chamfer, High-Speed Steel, Bright/Uncoated Finish - 2-9/16" Thread Length, 5-7/16" OAL, Right Hand, D5

Tap & Die Set: #4-40 to 1-14 Taps, NPT, UNC & UNF | Value Collection Tap & Die Set: #4-40 to 1-14 Taps, NPT, UNC & UNF - High Speed Steel, Round Dies, 64 Pc

Standard Pipe Tap: 3/4-14, NPT, 5 Flutes, High Speed Steel, Bright/Uncoated | Value Collection Standard Pipe Tap: 3/4-14, NPT, 5 Flutes, High Speed Steel, Bright/Uncoated - 1-3/8" Thread Length

Tap Set: 5/8-11 UNC, 4 Flute, High Speed Steel, Bright Finish | Value Collection Tap Set: 5/8-11 UNC, 4 Flute, High Speed Steel, Bright Finish - 3-13/16" OAL, Right Hand, 3 Pc

Straight Flute Tap: 1-1/2-12 UNF, 6 Flute, Taper Chamfer, 3B Class of Fit, High-Speed Steel, Bright/Uncoated Finish | Interstate Straight Flute Tap: 1-1/2-12 UNF, 6 Flute, Taper Chamfer, 3B Class of Fit, High-Speed Steel, Bright/Uncoated Finish - 3" Thread Length, 6-3/8" OAL, Right Hand, H4

Spiral Point Tap: 5/16-18 UNC, 3 Flutes, Plug Chamfer, 2B Class of Fit, HSS-E Cobalt, NT2 Coated | MultiTAP Spiral Point Tap: 5/16-18 UNC, 3 Flutes, Plug Chamfer, 2B Class of Fit, HSS-E Cobalt, NT2 Coated - 0.7870" Thread Length, 3.5430" OAL, Right Hand, Series BU497300

Tap Set: 7/8-9 UNC, 4 Flute, High Speed Steel, Bright Finish | Value Collection Tap Set: 7/8-9 UNC, 4 Flute, High Speed Steel, Bright Finish - 4-11/16" OAL, Right Hand, 3 Pc

Descriptions: Uxcell M2 x 0.4 Metric Left Hand Alloy Steel Machine Thread Round Threading Dies Made of alloy steel the round threading die has high hardness high toughness wear-resistance corrosion resistance and heat resistance. The round die can process correct or clean external threads. Perfect for re-threading existing threads in hard materials like metal or making new threads in softer material such as plastic. Conical locking hole strong locking and not loose. Features the base substrate without any coatings suitable for general purpose threading. Great for maintenance and repair work. The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench and the screw should be inserted into the slot of the die and tightened. Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread.

,andlongservicelife Highhardness,wearhightemperature TheHandlemadeofhighqualitybearingsteel...

Descriptions: 1. Spiral flute design upward chip removal. Right hand thread cutting clear threads with no burrs fast tapping with accuracy. 2. High-speed steel tool is with high hardness and toughness for wear resistance good for general purpose applications. Features nitriding coated surface for rust prevention and long service life. 3. Suitable for processing blind holes and sticky materials. Great for drilling and tapping aluminum die steel stainless steel bronze hard plastics etc.. 4. Used on drilling machines tapping machines CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. 5. Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause damage to the tap due to uneven force.