4200 GPH Submersible Pool Pump with Auto Switch

BROAD BASE: Specifically designed to firmly maintain the pump on a soft surface, preventing it from tipping over while in use. ANTI-CLOG: The strainer filters debris to prevent blockage. LONG REACH: Includes a 32ft retrieval rope. Easy to use on a large area. EASY ASSEMBLY: Easy to connect to the water pump and detach from it.

POWERFUL AND QUICK: Pumps water 1.4X faster than other pumps. With an open impeller, flow rate of up to 2800 GPH, and max lift-up capacity of 25FT, this 1/2 HP submersible water pump can make standing water disappear quickly, eliminating the danger of flooding. KNOCK OVER OPERATION & DRY RUN PROTECTION: Works automatically even when accidentally knocked over. It monitors the water level and stops automatically when the surrounding water level drops to a normal level, is lower than the impeller, or if it encounters a blockage. The sensor prevents the machine from dry running and eventual machine failure. EFFORTLESS WATER REMOVAL DRIVEN BY THE US-PATENTED AUTO-FLO TECHNOLOGY: The water pump is turned on as soon as Auto-Flo detects a water level of 2" (about 50.8 mm). Auto-Flo shuts down the pump when the water level falls below the normal level, protecting the motor from burns caused by dry running. 6 ADAPTORS (2*2”,1-1⁄2”,1-1⁄4”,1”, 3⁄4”): 6 adaptors depending on the urgency and speed required for draining water. Our largest 2'' adapters need 2'' water pipes to achieve a max 2800 GPH of pumping water, which requires a 2'' hose. Smartbot can handle different types of water including clear water, rainwater, spring water, river water, lake water, etc (with up to 1/4" Diameter Solids). SMART AND PORTABLE: Small But Mighty at just 8710 inches. You can easily carry the Smartbot from the basement to the garden or pool at any time, to effectively drain all the water. This small pump can drain basements and silos affected by floods, drainage wells, rainwater collection tanks, roofs, etc.

EFFECTIVE AND POWERFUL PERFORMANCE: Pumps water 1.9X faster than other pumps. With its open impellers, the flow rate can be up to 3600 GPH with a maximum lift-up capacity of 30FT. This 1/2 HP submersible water pump can quickly remove standing water, preventing flooding damage. The pump can handle various types of water including clear water, rainwater, spring water, river water, lake water, and other types of water (with up to 1/4" Diameter Solids). EFFORTLESS WATER REMOVAL DRIVEN BY THE US-PATENTED AUTO-FLO TECHNOLOGY: The water pump is turned on as soon as Auto-Flo detects a water level of 2" (about 50.8 mm). Auto-Flo shuts down the pump when the water level falls below the normal level, protecting the motor from burns caused by dry running. KNOCK OVER OPERATION & DRY RUN PROTECTION: It works continuously even if it is accidentally knocked over. When the surrounding water level falls below the sensors or a blockage occurs, the Auto-Flo will turn the pump off, preventing dry running and causing machine failure. 6 ADAPTORS (2*2”,1-1⁄2”,1-1⁄4”,1”, 3⁄4”): 6 adaptors depending on the urgency and speed required for draining water. Our largest 2'' adapters need 2'' water pipes to achieve a max 3600 GPH of pumping water, which requires a 2'' hose. Smartbot can handle different types of water including clear water, rainwater, spring water, river water, lake water, etc (with up to 1/4" Diameter Solids). SMART, COMPACT, AND PORTABLE: The Robot-like design at only 8710 inches. At any moment, you may effortlessly transport it from the basement to the garden or pool. The 10-foot power cord provides a large reach for outdoor use.