Evolve3D Umarex Notos Quad Magazine Holder - Magnetic Pic Rail Mount

MATERIAL 3D Printed PETG  INSTALLATION Purchase includes three parts 3D printed barrel band assembly, M3 screw, and M3 square nut.  WARNING! Confirm air gun is unloaded and safe before beginning installation.  1. Remove any barrel accessories.  2. Slide barrel band assembly over shroud and tube using gun and O-ring safe lubricant if necessary.  3. Secure barrel band assembly, using m3 hardware, by hand tightening until snug. DO NOT OVER TORQUE!  DISCLAIMER The purchase includes only the barrel band and fasteners. All other objects are for reference only. USE this product at your own risk. EVOLVE 3D, LLC is not liable for damage to your property or person while using this product.  WARRANTY We offer a limited lifetime warranty on our 3D printed parts.

FEATURES: - Made from durable PETG plastic. - Provides a secure grip around the barrel shroud and cylinder. - Helps minimize barrel movement and flex during handling or shooting.   Whats Included? 1x 3D Printed Barrel Band (PETG) Pre-installed Silicone Friction Pads M3 Mounting Hardware (screws and square nuts)  COMPATIBILITY Designed specifically for the stock tube model Umarex Zelos.   INSTALLATION WARNING! Before installing any accessories, always ensure your airgun is unloaded and safe. Do not fully loosen the screws during installation, as the M3 square nuts may fall out of the barrel band slots. Prepare for Installation  Remove any existing accessories that may interfere with the barrel band. Remove the tube from the rifle in accordance with manufacturer recommendations - the band will need to be installed from the back of the tube due to the Position on the pressure gauge. Position the Barrel Band  Slide the barrel band over the cylinder and shroud, carefully working it into place. If needed, apply a small amount of silicone-safe lubricant to ease installation. Secure the Barrel Band  Hand-tighten the assembly until snug. Do not over-torque the screws.  DISCLAIMER The purchase includes only the 3D printed part and mounting hardware. All other items in photos are for reference only. USE this product at your own risk. EVOLVE 3D, LLC is not liable for damage to your property or person while using this product.   WARRANTY We offer a limited lifetime warranty on our 3D printed parts.

FEATURES  Three neodymium magnets hold one OEM .22 or .25 caliber magazine securely in place.  Snaps onto the rifle chassis with no tools required.  Built from high-quality, durable material.  Keeps your magazine within reach for faster reloads.  Adds storage without adding bulk.   COMPATIBILITY Designed for Umarex Zelos OEM magazines in .22 caliber and .25 caliber.   DISCLAIMER The purchase includes only the 3D printed mag holder. All other items in photos are for reference only. USE this product at your own risk. EVOLVE 3D, LLC is not liable for damage to your property or person while using this product.   WARRANTY We offer a limited lifetime warranty on our 3D printed parts.