NeoSport 5/3mm Xspan Bibbed Hood Large

Designed as part of the Aqua Lock System this 7/5mm Aqua Lock Quick-Dry Hood utilize the same construction techniques employed by all Aqua Lock Wetsuits. Every seam on the hoods are first double glued and blind stitched inside and out. Then the outer seam is coated with a special waterproof Aqua Lock liquid tape barrier which seals the seam from water entry and helps protect the stitching from damage and unraveling. The interior of the Aqua Lock hood is lined with Henderson's new Quick-Dry interior. This revolutionary hydrophobic lining will significantly accelerate the speed at which the Aqua Lock boot will dry, allowing too dry in just a few minutes not hours. Imagine never needing to put on a cold, damp boot prior to your second dive or experiencing the disappointment of waking up in the morning only to find your accessories did not completely dry overnight. The Quick-Dry interior is super soft and adds a luxurious feel to the interior of the boot and makes donning and doffing the boot easier. Additionally, the Quick-Dry interior will limit water entry and water movement throughout the boot keeping you warmer longer. The hood bib is extended for additional coverage and a secure fit. The outer portion of the bib features 3 silicone O-ring seals which are designed to mate to the inside of the Aqua Lock jumpsuit. The inner bib is made from ultra-soft and supple skin neoprene to provide a compression seal against the skin. A revolutionary new one-way flow vent purge valve, vents regulator exhaust from the hood while preventing cold water entry. This design is a Henderson exclusive and not available on any other hood. The Aqua Lock hood exterior features Henderson's renowned Aquasilk laminate. Aquasilk provides a 250% stretch exterior for easy donning and doffing of hood. Hood is available in multiple sizes.

Designed as part of the Aqua Lock System this 7/5mm Aqua Lock Quick-Dry Hood utilize the same construction techniques employed by all Aqua Lock Wetsuits. Every seam on the hoods are first double glued and blind stitched inside and out. Then the outer seam is coated with a special waterproof Aqua Lock liquid tape barrier which seals the seam from water entry and helps protect the stitching from damage and unraveling. The interior of the Aqua Lock hood is lined with Henderson's new Quick-Dry interior. This revolutionary hydrophobic lining will significantly accelerate the speed at which the Aqua Lock boot will dry, allowing too dry in just a few minutes not hours. Imagine never needing to put on a cold, damp boot prior to your second dive or experiencing the disappointment of waking up in the morning only to find your accessories did not completely dry overnight. The Quick-Dry interior is super soft and adds a luxurious feel to the interior of the boot and makes donning and doffing the boot easier. Additionally, the Quick-Dry interior will limit water entry and water movement throughout the boot keeping you warmer longer. The hood bib is extended for additional coverage and a secure fit. The outer portion of the bib features 3 silicone O-ring seals which are designed to mate to the inside of the Aqua Lock jumpsuit. The inner bib is made from ultra-soft and supple skin neoprene to provide a compression seal against the skin. A revolutionary new one-way flow vent purge valve, vents regulator exhaust from the hood while preventing cold water entry. This design is a Henderson exclusive and not available on any other hood. The Aqua Lock hood exterior features Henderson's renowned Aquasilk laminate. Aquasilk provides a 250% stretch exterior for easy donning and doffing of hood. Hood is available in multiple sizes.

There's no better way to enter the water then with NeoSport XSPAN. Wrap yourself in pure comfort and performance. XSPAN wetsuits and accessories provide nearly limitless stretch by combining 2 super elastic fabric laminates with a super soft foam rubber. The result is unparalleled performance and comfort in a nylon 2 wetsuit that will stretch your budget as well as your time in the water. All XSPAN products are constructed using 100% XSPAN material. Make you first step into the water unforgettable... with a warm, comfortable, and affordable XSPAN wetsuit hood exclusively from NeoSport. XSPAN will X-spand your X-spectations of comfort, performance, and value. The Exclusive XSPAN material is ultra-soft and comfortable to wear, that's why NeoSport uses 100% 7mm XSPAN with 250% 4-way super-stretch foam neoprene rubber in the construction of this great hood. Layering is the key to warmth when we Scuba dive. By layering we breathe slower conserve our air supply, so we can make longer and more comfortable dives. NeoSport's XSPAN 7/5mm Vented Bib Hood, can allow your diving to be more enjoyable. Smart anatomical design pays big dividends in comfort with this multi-thickness hood. The thinner, oversized bib is made to tuck easily into wetsuits forming additional layering for a good seal and an overall anatomical shape that helps eliminate sags and air pockets. The face seal can be trimmed to precisely match unique facial contours while an integrated vent allows bubbles to escape through the top of the hood preventing ballooning without promoting water exchange. All seams are glued and sewn for durability and to limit water exchange. The hood body is made from XSPAN nylon neoprene 7mm material with the bib being 5mm. Hood is black in color and available in multiple sizes.

There's no better way to enter the water than with NeoSport XSPAN. Wrap yourself in pure comfort and performance. XSPAN will X-span your X-Spectations of comfort, performance, and value in an entry level wetsuit accessory. XSPAN provides nearly limitless stretch by combining 2 super elastic fabric laminates with a super soft neoprene rubber. The result is unparalleled performance and comfort in a nylon 2 hood that will stretch your budget as well as your time in the water. Layering is the key to warmth when we Scuba dive. By layering we breathe slower conserve our air supply, so we can make longer and more comfortable dives. NeoSports XSPAN 5/3mm Vented Bib Hood, can allow your diving to be more enjoyable. Smart anatomical design pays big dividends in comfort with this multi-thickness hood. The thinner, oversized bib is made to tuck easily into wetsuits forming additional layering for a good seal and an overall anatomical shape that helps eliminate sags and air pockets. The face seal can be trimmed to precisely match unique facial contours while an integrated vent allows bubbles to escape through the top of the hood preventing ballooning without promoting water exchange. All seams are glued and stitched for durability and to limit water exchange. The hood body is made from XSPAN nylon 2 neoprene 5mm material with the bib being 3mm. Hood is available in multiple sizes and is black in color.

There's no better way to enter the water than with NeoSport XSPAN. Wrap yourself in pure comfort and performance. XSPAN will X-span your X-Spectations of comfort, performance, and value in an entry level wetsuit accessory. XSPAN provides nearly limitless stretch by combining 2 super elastic fabric laminates with a super soft neoprene rubber. The result is unparalleled performance and comfort in a nylon 2 hood that will stretch your budget as well as your time in the water. Layering is the key to warmth when we Scuba dive. By layering we breathe slower conserve our air supply, so we can make longer and more comfortable dives. NeoSports XSPAN 5/3mm Vented Bib Hood, can allow your diving to be more enjoyable. Smart anatomical design pays big dividends in comfort with this multi-thickness hood. The thinner, oversized bib is made to tuck easily into wetsuits forming additional layering for a good seal and an overall anatomical shape that helps eliminate sags and air pockets. The face seal can be trimmed to precisely match unique facial contours while an integrated vent allows bubbles to escape through the top of the hood preventing ballooning without promoting water exchange. All seams are glued and stitched for durability and to limit water exchange. The hood body is made from XSPAN nylon 2 neoprene 5mm material with the bib being 3mm. Hood is available in multiple sizes and is black in color.