Cable Ladder Attachment Kit

This 1ft Cat6a Gray Slim Ethernet Patch Cable comes with a Snagless/Molded Boot and is the perfect solution to all of your Cat6a needs. The smaller diameter makes for a slimmer, more flexible cable that will fit well into cluttered data centers and other places where space is tight. With speeds up to 500 MHz, this cable twice as fast as regular Cat6. Our Cat6a patch cables are tested for compliance with all EIA/TIA-568-C Category 6a specifications.

• Color: Gray

Slim Cat6 Ethernet cables of the 6 foot length have a variety of uses. These cables will suffice for connecting routers/switches to Cable/DSL modems, computers to routers/switches or even in the server/network room for connecting ports on patch panels. These Ethernet Cables are great for the home office or any other environment.

Cat6 cables are used for networking, data transfer, and phone lines. Cat6 Cable is used in network applications and has been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products.

This particular cable is a black UTP (Unshielded Twisted Pair) patch cable with translucent clear boot (snagless installation) and extra protection for the RJ45 connector and clip. Cat6 cable includes a spline to help ensure separation between the pairs which limits cross talk. The connectors are wired to the T568B standard. The individual conductors are 28AWG (American wire gauge) stranded pure copper. Cat6 patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat6 Ethernet patch cables exceed the EIA/TIA-568-C standard.

• Color: Black
• End 1: Cat6 Male Plug
• End 2: Cat6 Male Plug
• Length: 6 feet
• Wire Gauge: 28 AWG
• Shield Type: unshielded
• Weight: 0.1 lbs

Cat6 Ethernet cables of the 10 foot length have a variety of uses.
These cables will suffice for connecting routers,switches to Cable,DSL modems, computers to routers,switches or even in the server,network room for connecting ports on patch panels.
These Ethernet Cables are great for the home office or any other environment.


Cat6 cables are used for networking, data transfer, and phone lines.
Cat6 Cable is used in network applications and has been designed specifically for Gigabit Ethernet applications.
They perform at high-data transfer rates, and work with ATM and gigabit speed products.


This particular cable is a green UTP (Unshielded Twisted Pair) bootless patch cable.
Cat6 cable includes a spline to help ensure separation between the pairs which limits cross talk.
The connectors are wired to the T568B standard.
The individual conductors are 24 AWG (American wire gauge) stranded pure copper.
Cat6 patch cables are stranded to improve flexibility.
Pure copper conductors provide the best signal possible.
The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life.
Our Cat6 Ethernet patch cables exceed the EIA,TIA-568-C standard.

This Snagless Unshielded Cat6a patch cable is ideal for use with 10GBase-T ports and equipment, such as network adapters, hubs, switches, routers, DSL/cable modems and patch panels, and enables 10 Gigabit data transmission over a 4 pair copper cable allowing connections up to 100 meters. Current Cat6 cabling systems may only support 10 Gigabit Ethernet over limited distances. Each patch cable is fully tested to meet ANSI/TIA 568 C.2 Cat6a channel requirements. Constructed from high quality cable and plugs, this design offers improved alien cross talk performance. The Snagless hood is perfect for high density switch applications.

• Color: Red
• Cable Length: 15 ft
• Cable Type: Category 6a
• Connector on First End: RJ-45 Male Network
• Connector on Second End: RJ-45 Male Network
• Product Type: Network Cable
• Weight: 0.4 lbs

This is a 1m HDMI male to male black cable for connectivity between display devices. This device offers a maximum resolution of 4096x2160 (DCI 4K) as well as a 120Hz refresh rate. This part is designed to fit your application needs by providing HDMI 1.4 to HDMI 1.4 connectivity.

• Color: Black
• Connector 1: HDMI 1.4
• Connector 1 Gender: Male
• Connector 2: HDMI 1.4
• Connector 2 Gender: Male
• Family Type: HDMI to HDMI
• Length (ft.): 3
• Length (m): 0.91
• Maximum Resolution: 4096x2160 (DCI 4K)
• Weight: 0.4 lbs

If you are a gadget lover, our Electronics catalog is your dream destination. Choose from hundreds of gadgets and accessories to suit different uses and add some entertainment, facility and convenience to your life.

• Cat6A Snagless Unshielded UTP Network Patch Ethernet Cable

• Color: Green
• Length: 14 ft.
• Weight: 0.38 lbs

• Part Number:
• Cable Type: Cat5e
• Cable Length: 3 feet
• Color: Gray
• Connector Type: RJ45
• Shielding: Shielded

• Molded Boot
• Snagless Design
• High Performance
• Easy Installation
• Compatible with most network devices

Slim Cat6 Ethernet cables of the 10 foot length have a variety of uses. These cables will suffice for connecting routers/switches to Cable/DSL modems, computers to routers/switches or even in the server/network room for connecting ports on patch panels. These Ethernet Cables are great for the home office or any other environment.

Cat6 cables are used for networking, data transfer, and phone lines. Cat6 Cable is used in network applications and has been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products.

This particular cable is a purple UTP (Unshielded Twisted Pair) patch cable with translucent clear boot (snagless installation) and extra protection for the RJ45 connector and clip. Cat6 cable includes a spline to help ensure separation between the pairs which limits cross talk. The connectors are wired to the T568B standard. The individual conductors are 28AWG (American wire gauge) stranded pure copper. Cat6 patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat6 Ethernet patch cables exceed the EIA/TIA-568-C standard.

• Color: Purple
• End 1: Cat6 Male Plug
• End 2: Cat6 Male Plug
• Length: 10 feet
• Wire Gauge: 28 AWG
• Shield Type: unshielded
• Weight: 0.14 lbs

This 2 foot Cat6a Purple Slim Ethernet Patch Cable is perfect for installations that are in a tight-spot, and require a thinner cable than the typical thick Cat6a cable. Category 6a is the best 10 Gigabit copper Ethernet cable. The 500 Mhz performance is double that of Category 6 and five times the bandwidth capacity of Category 5e. The extra performance is ideal for Power over Ethernet and Voice Over Internet Protocol applications where data loss can be seen and heard.

• Color: Purple
• Material: Copper
• Wire Gauge: 28 AWG
• End 1: RJ45 Male Plug
• End 2: RJ45 Male Plug
• Length: 2 ft.
• Weight: 0.07 lbs

For fast Ethernet and Gigabit computer networks that require bandwidth-intensive voice, data, or video distribution applications. Meets all Cat6 TIA/EIA standards, and drastically reduces both impedance and structural return loss (SRL). Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high quality copper cable, this design minimizes Near-End Crosstalk (NEXT) levels.

• Conductor - 24AWG (7/0.20 BC)
• Insulation - HD-PE ID: ø0.98±0.05

• Connector Type - 8P8C (RJ45)
• Contacts - Gold Plated 50µ

• Jacket - PVC
• OD - 6.0±0.15

• Color: Green
• Conductor DC Resistance: 9.38 Ohm/100m
• Impedance: 100 Ohm
• Capacitance: 5600pf/100m
• Temperature Rating: 75°C
• Voltage Rating: 30V
• Size: 2 ft.
• Weight : 0.061 lbs

This Snagless Unshielded Cat6a patch cable is ideal for use with 10GBase-T ports and equipment, such as network adapters, hubs, switches, routers, DSL/cable modems and patch panels, and enables 10 Gigabit data transmission over a 4 pair copper cable allowing connections up to 100 meters. Current Cat6 cabling systems may only support 10 Gigabit Ethernet over limited distances. Each patch cable is fully tested to meet ANSI/TIA 568 C.2 Cat6a channel requirements. Constructed from high quality cable and plugs, this design offers improved alien cross talk performance. The Snagless hood is perfect for high density switch applications.

• Color: Black
• Cable Length: 100 ft
• Cable Type: Category 6a
• Connector on First End: RJ-45 Male Network
• Connector on Second End: RJ-45 Male Network
• Product Type: Network Cable
• Weight: 0.25 lbs

• Cabling for category 5 (Cat5) and 5e (Cat5e) applications
• Length - 4 ft.
• Color - Blue
• Connectors - RJ45 male
• Feature molded connectors with integral strain relief
• Snagless design protects the locking tabs on the RJ45 connectors from being damaged or snapped off during installation
• PVC 4-pair stranded UTP
• Rated for 350MHz/ 1Gbps communication
• Meets most current industry standards including IEEE 802.3ab, IEEE 802.5, ANSI/EIA/TIA 568, ISO/IEC 11801 and ETL (category 5e draft 11)
• System Requirements - For 1000Base-T (1Gbps Ethernet), 10/100Base-T (Ethernet), 100 Mbps TPDDI, 155 Mbps ATM, ISDN, voice and Token Ring Type3 applications.

Our 10 foot high quality null modem serial cable features molded female DB9 connectors and gold plated contacts for superior corrosion resistance ensuring a solid connection for the life of the cable.
This null modem cable is typically used to transfer data from one PC directly to another PC.
This female to female 8 conductor serial cable is solidly constructed, UL rated and RoHS Compliant.

For fast Ethernet and Gigabit computer networks that require bandwidth-intensive voice, data, or video distribution applications. Meets all Cat6 TIA/EIA standards, and drastically reduces both impedance and structural return loss (SRL). Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high quality copper cable, this design minimizes Near-End Crosstalk (NEXT) levels. The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief.

• Snagless design protects clips when plugging and unplugging
• Standard RJ45 connectors and unshielded twisted pair wires

• Conductor Type - 24AWG (7/0.20), Stranded Bare Copper
• Insulation - H-D PE
• Diameter - 0.98 ± 0.05 mm

• Connector Type - 8P8C (RJ45)
• Connector Material - Polycarbonate
• Contact Material - Copper Alloy, Gold Plating - 50µm
• Hood Material - Molded PVC

• Jacket - PVC
• Minimum Average Thickness - 0.60mm
• Outer Diameter - 6.20 ± 0.30 mm

• Color: Purple
• Conductor DC Resistance: 9.38 Ohm 100m (maximum)
• Impedance: 100 Ohm
• Capacitance: 5600pf/100m
• Voltage Rating: 30V
• Temperature Rating: 60°C
• Size: 2 ft.
• Weight : 0.067 lbs

This Snagless Shielded Cat6a patch cable is ideal for use with 10GBase-T ports and equipment, such as network adapters, hubs, switches, routers, DSL/cable modems and patch panels, and will protect a high speed 10 Gigabit network connection from noise and electromagnetic interference. For voice/data/video distribution, this cable will handle bandwidth-intensive applications and drastically reduces both impedance and structural return loss (SRL). Each patch cable is fully tested to meet ANSI/TIA 568 C.2 Cat6a component requirements.

Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from Excellent cable and plugs, this design minimizes Near-End Crosstalk (NEXT) levels.

• Designed for network adapters, hubs, switches, routers, HDBaseT applications and more
• Supports 10 Gigabit networks up to 328ft for fast data transmission and maximum performance
• Meets the ANSI/TIA-568-C2 Cat6a requirements for supporting a wide variety of applications
• Constructed with shielded twisted pair (STP) wires, designed to protect a high speed network from noise and electromagnetic interference
• Snagless connector design for high density environments and protecting the RJ-45 connector's lock

• Color: Yellow
• Features: PoE (Power Over Ethernet), Stranded Conductors, Stranded Copper
• Product Depth: 8.0 in.
• Product Height: 0.5 in.
• Cable Length: 20 ft.
• Product Length: 20.0 ft.
• Product Width: 12.5 in.
• Bandwidth: 500 mHz
• Cable Diameter: 6.2 mm
• Bend Radius: 49.6 mm
• Connector Type: Booted, Snagless
• Cable Type: Ethernet Patch Cable
• Conductor: 4-Pair Twisted
• Connector Material: Gold
• Data Transfer Rate: 10 Gbps
• Indoor/Outdoor: Indoor
• Insulation Material: FMPE (Foam Polyethylene)
• Jacket Material: PVC (Polyvinyl Chloride)
• Jacket Rating: Standard / Non-Rated
• Jacket Application: Standard Non-Rated
• Operating Temperature: -20°-80°C
• Operating Temperature Max: 80 °C
• Operating Temperature Min: -20 °C
• Weight: 0.6 lbs

Cat6 Ethernet cables of the 10 foot length have a variety of uses.
These cables will suffice for connecting routers,switches to Cable,DSL modems, computers to routers,switches or even in the server,network room for connecting ports on patch panels.
These Ethernet Cables are great for the home office or any other environment.


Cat6 cables are used for networking, data transfer, and phone lines.
Cat6 Cable is used in network applications and has been designed specifically for Gigabit Ethernet applications.
They perform at high-data transfer rates, and work with ATM and gigabit speed products.


This particular cable is a green UTP (Unshielded Twisted Pair) bootless patch cable.
Cat6 cable includes a spline to help ensure separation between the pairs which limits cross talk.
The connectors are wired to the T568B standard.
The individual conductors are 24 AWG (American wire gauge) stranded pure copper.
Cat6 patch cables are stranded to improve flexibility.
Pure copper conductors provide the best signal possible.
The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life.
Our Cat6 Ethernet patch cables exceed the EIA,TIA-568-C standard.