TEMU 業務用扇風機 工業扇 工業用扇風機 扇風機 48cm 3枚羽根 床置き 大型扇風機 サーキュレーター 強力 フロア扇 フロア扇風機 循環 換気 乾燥

An automatic and programmable controller the Broan VT8W is a must-have accessory for select Broan ventilation systems.

Designed for use with select Broan ventilation systems the Broan Deco-Touch Automatic/Manual Wall Control (VT7W) is an all-in-one controller for simplified operation.

If you're dealing with a poor performing register turn to this booster fan. Equipped with programmable features it'll automatically adjust the airflow to match your needs.

For poor performing registers turn to this AC Infinity Booster Fan. Designed to increase the airflow in areas that are lacking this fan features programmable monitoring to take the guesswork out of comfort.

Eliminate the struggle of dealing with poor performing registers with this booster fan from AC Infinity. It quietly increases the amount of warm or cool air coming from your register and ensures you get the most out of your homes heating and cooling system.

In-line duct fan solves air delivery problems without major system rework or expense. Applications include boosting airflow to rooms that are too hot or too cold and general ventilation of clean indoor air. Designed to fit flexible and rigid ducts. Fan has 1 end with a crimp and bead design for easy installation. Sleeve bearings allow for installation at almost any angle. Features a tip-throw, balanced blade. Thermally protected Class B motor has large oil reservoir to ensure a quiet, long life. Made of corrosion-resistant metal. Not to be used in temperatures exceeding 140 Deg degree . Includes attached power cord and installment screws. UL Underwriter's Laboratories approved. 1-year limited warranty. Assembled in the USA.

Meets UL listed Underwriters Laboratories standard for dryer transition duct. Steel wire support, multi-ply design of aluminum and polyester. Used to vent clothes dryers and bathroom fans.

Meets UL listed Underwriters Laboratories standard for dryer transition duct. Steel wire support, multi-ply design of aluminum and polyester. Used to vent clothes dryers and bathroom fans.

13 In.H-W 5.75 In.L Alu Wall Backdraft Dampr, Damper Application Backdraft, For Nominal Duct Diameter Not Applicable, Frame Material Galvanized Steel, Number of Panels 1, Maximum Air Velocity 2500 fpm, Overall Height 13 in, Rough Opening Diameter 10 1/2 in, Rough Opening Shape Square, Fits Fan Diameter 10 in, For Duct Shape Not Applicable, Free Area 0.7 sq ft, Overall Width 13 in, Frame Material Thickness 20 ga, Overall Length 5 3/4 in, Connection Type Not Applicable, Frame Depth 2 1/2 in

Crawl Space Fan, Duct Diameter Not Applicable, For Cut-Out Height 6 in, For Cut-Out Width 8 in, Frame Finish Aluminum, Frame Material Steel, Housing Material Steel, Housing Finish Galvanized, Includes Dehumidistat, Power Cord, Thermostat, Includes Dehumidistat Yes, Maximum Airflow 110 cfm

Workstation Fan, Non-Oscillating, Voltage 120V AC, 1 Phase, Motor HP 1/12 hp, Fan Mounting Location Any Surface, Ceiling, Machines, Wall, Work Bench, Drive Type Direct Drive, Height 15 1/4 in, Width 14 1/2 in

In-Line Duct Fan, For Fan Type In-Line Duct Fan, Airflow @ 0.000 in SP 101 cfm, Duct Diameter 4 in, Motor Output Power 26 W, Motor IP Rating IP44, Nameplate Voltage 120V AC, Phase 1, Number of Speeds 1, Overall Diameter 5 1/2 in, Overall Height 3 3/4 in, Overall Width 3 3/4 in, Application General Purpose, High-Efficiency Motor No, Housing Material Thermoplastic, Motor Speed 2,500 RPM, Includes Mounting Bracket, Maximum Inlet Air Temperature 104 Degrees F, Speed Controllable Yes

The Lambro 6 In. white plastic exhaust or intake vent is ideal for venting or bringing fresh outside air through the wall. This vent is used for bath fan exhaust, range hood exhaust, other general venting applications that require moist air and humidity from exiting the home. The wall vent allows for maximum airflow while reducing back flow of exhaust air. The screen is hinged and removable to allow for opening/closing for easy cleaning. The plastic vent has a UV additive to prevent premature fading due to the sun. The vent can be painted to match your homes trim color. Fresh Air Intake Use The removable damper allows for this exhaust vent to be used as a fresh air intake vent. You can now stock one vent that has two uses in your inventory. Fresh air intakes are ideal for allowing clean fresh air into the home especially when gas appliances are present. Installation screws not included . Accessible screw installation holes caulk friendly frame.

Wet-Location Square Axial Fan, Fan Shape Square, Mounting Eye O.C. 3 1/4 in, Height 3 5/8 in, Depth 1 1/2 in, Width 3 5/8 in, CFM @ 0.000-In. SP 47.1 cfm, Watts 11 W, Voltage 115/230V AC, 50/60 Hz Hz, 0.18 A Amps, Electrical Connection - Fans Lead Wires, Sound Level 55, IP Rating IP65, Mounting Position Vertical or Horizontal, Bearing Type Ball, 6800 RPM RPM, Motor Insulation Class E, Thermal Protection Electronic, Max. Ambient Temp. 158 Degrees F, Blade Material Fiberglass Reinforced Polyamide

Wet-Location Square Axial Fan, Fan Shape Square, Mounting Eye O.C. 3 1/4 in, Height 3 5/8 in, Depth 1 1/2 in, Width 3 5/8 in, CFM @ 0.000-In. SP 47.1 cfm, Watts 11 W, Voltage 115/230V AC, 50/60 Hz Hz, 0.18 A Amps, Electrical Connection - Fans Lead Wires, Sound Level 55, IP Rating IP65, Mounting Position Vertical or Horizontal, Bearing Type Ball, 6800 RPM RPM, Motor Insulation Class E, Thermal Protection Electronic, Max. Ambient Temp. 158 Degrees F, Blade Material Fiberglass Reinforced Polyamide

In-Line Duct Fan, For Fan Type In-Line Duct Fan, Airflow @ 0.000 in SP 333 cfm, Duct Diameter 6 in, Motor Output Power 65 W, Motor IP Rating IP44, Nameplate Voltage 120V AC, Phase 1, Number of Speeds 1, Overall Diameter 8 3/4 in, Overall Height 8 3/4 in, Overall Width 19 1/8 in, Application General Purpose, High-Efficiency Motor No, Housing Material Thermoplastic, Motor Speed 2,700 RPM, Includes Mounting Bracket, Maximum Inlet Air Temperature 140 Degrees F, Speed Control Included No

39 In.H-W 5.75 In.L Alu Wall Exhaust Shutter, Damper Application Backdraft, For Nominal Duct Diameter Not Applicable, Frame Material Aluminum, Number of Panels 1, Maximum Air Velocity 2500 fpm, Overall Height 39 in, Rough Opening Diameter 36 1/2 in, Rough Opening Shape Square, Fits Fan Diameter 36 in, For Duct Shape Not Applicable, Free Area 7.4 sq ft, Overall Width 39 in, Frame Material Thickness 0.8 in, Overall Length 5 3/4 in, Connection Type Not Applicable, Frame Depth 3 in

Exhaust Fan, Discharge Direction Vertical, Duct Diameter 8 in, Duct Shape Round, Housing Finish Painted Enamel, Housing Material Steel, Includes Backdraft Damper, Exhaust Grille, Maximum Airflow 416 cfm, Exhaust Airflow @ 0.100 in SP 395 cfm, Exhaust Airflow @ 0.000 in SP 416 cfm, Maximum Noise Level 14.1 sones, Noise Level @ 0.100 in SP @ 5 ft 14 sones, Maximum Coverage Area 750 sq ft, Number of Speeds 1, Overall Depth 11 1/2 in, Overall Height 16 1/8 in, Overall Width 15 5/8 in, Phase 1

In-Line Ceiling Exhaust Fan, Discharge Direction Horizontal/Vertical, Duct Diameter Not Applicable, Duct Height 8 in, Duct Width 8 in, Duct Shape Square, Nameplate Voltage 115V AC, Exhaust Airflow @ 0.100 in SP 231 cfm, Exhaust Airflow @ 0.200 in SP 212 cfm, Exhaust Airflow @ 0.250 in SP 203 cfm, Noise Level @ 0.100 in SP @ 5 ft 0.4 sones, Fan Wattage 49 W, Frequency 60 Hz, Full Load Current 0.45 A, Housing Material Steel, Motor Output Power 16 2/5 W, Motor Type Shaded Pole

DESIGNED FOR CONTINUOUS AIRFLOW THIS FAN IMPROVES CO2 CIRCULATION AND REDUCES SURFACE CONDENSATION TO BOOST PLANT GROWTH AND DECREASE DISEASE. THIS 24"" FAN EASILY MOUNTS TO ANY WALL AND HAS ALUMINUM BLADES WITH STEEL WIRE GUARDS FOR SAFETY. UL-LISTED.

DESIGNED FOR CONTINUOUS AIRFLOW THIS FAN IMPROVES CO2 CIRCULATION AND REDUCES SURFACE CONDENSATION TO BOOST PLANT GROWTH AND DECREASE DISEASE. THIS 24"" FAN EASILY MOUNTS TO ANY WALL AND HAS ALUMINUM BLADES WITH STEEL WIRE GUARDS FOR SAFETY. UL-LISTED.