16 AWG 3-Prong AC Power Cord for S1200/S2400, 1.2 m (3.9 ft), 15A UL-Compliant

Product information for 16 AWG 3-Prong AC Power Cord for S1200/S2400, 1.2 m (3.9 ft), 15A UL-Compliant

Product Description This 16 AWG AC power cord is built for reliable day-to-day use with power stations and other AC-powered devices. With a practical 1.2 m (approximately 3.9 ft) length, it provides enough reach to connect your device to a nearby wall outlet while keeping extra cable off the floor and out of the way. The cable uses thick 16 AWG copper conductors and supports up to 15A, giving you a solid margin for higher-draw devices within its rating. A tough PVC outer jacket and molded strain-relief boots on both ends help protect the conductors from bending, twisting, and everyday wear. Fully compliant with UL standards, this cord is suitable for use with standard North American AC power systems when used within its specified current rating. Usage Notes & Safety Instructions Make sure the total load of connected devices does not exceed 15A. Plug fully into a properly grounded AC outlet before turning on your equipment. Use only with devices that match the cord’s plug and connector type and electrical rating. For indoor, dry-location use; keep away from moisture, heat sources, and direct sunlight. Do not use the cord if the jacket is cracked, cut, or damaged, or if any plug/connector is loose or deformed. Avoid pulling the cord to unplug; always grasp the plug body to disconnect from the outlet.