10 ft. CAT6 Gigabit Patch Cable for Snagless RJ45 Molded Slim, Black

Slim Cat6 Ethernet cables of the 6 foot length have a variety of uses. These cables will suffice for connecting routers/switches to Cable/DSL modems, computers to routers/switches or even in the server/network room for connecting ports on patch panels. These Ethernet Cables are great for the home office or any other environment.

Cat6 cables are used for networking, data transfer, and phone lines. Cat6 Cable is used in network applications and has been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products.

This particular cable is a black UTP (Unshielded Twisted Pair) patch cable with translucent clear boot (snagless installation) and extra protection for the RJ45 connector and clip. Cat6 cable includes a spline to help ensure separation between the pairs which limits cross talk. The connectors are wired to the T568B standard. The individual conductors are 28AWG (American wire gauge) stranded pure copper. Cat6 patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat6 Ethernet patch cables exceed the EIA/TIA-568-C standard.

• Color: Black
• End 1: Cat6 Male Plug
• End 2: Cat6 Male Plug
• Length: 6 feet
• Wire Gauge: 28 AWG
• Shield Type: unshielded
• Weight: 0.1 lbs

This is a 1m HDMI male to male black cable for connectivity between display devices. This device offers a maximum resolution of 4096x2160 (DCI 4K) as well as a 120Hz refresh rate. This part is designed to fit your application needs by providing HDMI 1.4 to HDMI 1.4 connectivity.

• Color: Black
• Connector 1: HDMI 1.4
• Connector 1 Gender: Male
• Connector 2: HDMI 1.4
• Connector 2 Gender: Male
• Family Type: HDMI to HDMI
• Length (ft.): 3
• Length (m): 0.91
• Maximum Resolution: 4096x2160 (DCI 4K)
• Weight: 0.4 lbs

If you are a gadget lover, our Electronics catalog is your dream destination. Choose from hundreds of gadgets and accessories to suit different uses and add some entertainment, facility and convenience to your life.

• Cat6A Snagless Unshielded UTP Network Patch Ethernet Cable

• Color: Green
• Length: 14 ft.
• Weight: 0.38 lbs

This Snagless Unshielded Cat6a patch cable is ideal for use with 10GBase-T ports and equipment, such as network adapters, hubs, switches, routers, DSL/cable modems and patch panels, and enables 10 Gigabit data transmission over a 4 pair copper cable allowing connections up to 100 meters. Current Cat6 cabling systems may only support 10 Gigabit Ethernet over limited distances. Each patch cable is fully tested to meet ANSI/TIA 568 C.2 Cat6a channel requirements. Constructed from high quality cable and plugs, this design offers improved alien cross talk performance. The Snagless hood is perfect for high density switch applications.

• Color: Black
• Cable Length: 100 ft
• Cable Type: Category 6a
• Connector on First End: RJ-45 Male Network
• Connector on Second End: RJ-45 Male Network
• Product Type: Network Cable
• Weight: 0.25 lbs

For fast Ethernet and Gigabit computer networks that require bandwidth-intensive voice, data, or video distribution applications. Meets all Cat6 TIA/EIA standards, and drastically reduces both impedance and structural return loss (SRL). Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high quality copper cable, this design minimizes Near-End Crosstalk (NEXT) levels. The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief.

• Snagless design protects clips when plugging and unplugging
• Standard RJ45 connectors and unshielded twisted pair wires

• Conductor Type - 24AWG (7/0.20), Stranded Bare Copper
• Insulation - H-D PE
• Diameter - 0.98 ± 0.05 mm

• Connector Type - 8P8C (RJ45)
• Connector Material - Polycarbonate
• Contact Material - Copper Alloy, Gold Plating - 50µm
• Hood Material - Molded PVC

• Jacket - PVC
• Minimum Average Thickness - 0.60mm
• Outer Diameter - 6.20 ± 0.30 mm

• Color: Purple
• Conductor DC Resistance: 9.38 Ohm 100m (maximum)
• Impedance: 100 Ohm
• Capacitance: 5600pf/100m
• Voltage Rating: 30V
• Temperature Rating: 60°C
• Size: 2 ft.
• Weight : 0.067 lbs

This Snagless Shielded Cat6a patch cable is ideal for use with 10GBase-T ports and equipment, such as network adapters, hubs, switches, routers, DSL/cable modems and patch panels, and will protect a high speed 10 Gigabit network connection from noise and electromagnetic interference. For voice/data/video distribution, this cable will handle bandwidth-intensive applications and drastically reduces both impedance and structural return loss (SRL). Each patch cable is fully tested to meet ANSI/TIA 568 C.2 Cat6a component requirements.

Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from Excellent cable and plugs, this design minimizes Near-End Crosstalk (NEXT) levels.

• Designed for network adapters, hubs, switches, routers, HDBaseT applications and more
• Supports 10 Gigabit networks up to 328ft for fast data transmission and maximum performance
• Meets the ANSI/TIA-568-C2 Cat6a requirements for supporting a wide variety of applications
• Constructed with shielded twisted pair (STP) wires, designed to protect a high speed network from noise and electromagnetic interference
• Snagless connector design for high density environments and protecting the RJ-45 connector's lock

• Color: Yellow
• Features: PoE (Power Over Ethernet), Stranded Conductors, Stranded Copper
• Product Depth: 8.0 in.
• Product Height: 0.5 in.
• Cable Length: 20 ft.
• Product Length: 20.0 ft.
• Product Width: 12.5 in.
• Bandwidth: 500 mHz
• Cable Diameter: 6.2 mm
• Bend Radius: 49.6 mm
• Connector Type: Booted, Snagless
• Cable Type: Ethernet Patch Cable
• Conductor: 4-Pair Twisted
• Connector Material: Gold
• Data Transfer Rate: 10 Gbps
• Indoor/Outdoor: Indoor
• Insulation Material: FMPE (Foam Polyethylene)
• Jacket Material: PVC (Polyvinyl Chloride)
• Jacket Rating: Standard / Non-Rated
• Jacket Application: Standard Non-Rated
• Operating Temperature: -20°-80°C
• Operating Temperature Max: 80 °C
• Operating Temperature Min: -20 °C
• Weight: 0.6 lbs

Cat5e Ethernet cables of the 20 foot length have a variety of uses. These cables will provide a greater reach for those situations that require more serious distances. These Ethernet Cables are great for the home office or any other environment.

This particular cable is a green UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cable exceeds the EIA/TIA-568-C standard.

This Snagless Unshielded Cat6a patch cable is ideal for use with 10GBase-T ports and equipment, such as network adapters, hubs, switches, routers, DSL/cable modems and patch panels, and enables 10 Gigabit data transmission over a 4 pair copper cable allowing connections up to 100 meters. Current Cat6 cabling systems may only support 10 Gigabit Ethernet over limited distances. Each patch cable is fully tested to meet ANSI/TIA 568 C.2 Cat6a channel requirements. Constructed from high quality cable and plugs, this design offers improved alien cross talk performance. The Snagless hood is ideal for high density switch applications.

• Conductor Type: 26AWG (7/0.16) (bare copper)
• Insulation: HD-PE

• Foil shield: Aluminum foil (100% coverage)
• Jacket: PVC

• Connector Type: RJ-45 Male
• Housing: Polycarbonate
• Contacts: 50µm gold plated
• Hood: Molded Snagless PVC

• Color: Gray
• Conductor DC Resistance: Stranded UTP
• Wiring Scheme: 568B
• Temperature Rating: 75°C
• Size: 20 ft.
• Weight : 0.514 lbs

This Snagless Shielded Cat6a patch cable is ideal for use with 10GBase-T ports and equipment, such as network adapters, hubs, switches, routers, DSL/cable modems and patch panels, and will protect a high speed 10 Gigabit network connection from noise and electromagnetic interference. For voice/data/video distribution, this cable will handle bandwidth-intensive applications and drastically reduces both impedance and structural return loss (SRL). Each patch cable is fully tested to meet ANSI/TIA 568 C.2 Cat6a component requirements. Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high quality cable and plugs, this design minimizes Near-End Crosstalk (NEXT) levels.

• Conductor Type: 26AWG (7/0.16) (bare copper)
• Insulation: FM-PE

• Foil shield: Aluminum foil (100% coverage)
• Braided shield: Copper braid (40% coverage)
• Jacket: PVC

• Connector Type: RJ-45 Male
• Shell: Nickel plated for shielding
• Housing: Polycarbonate
• Contacts: 50µm gold plated
• Hood: Molded Snagless PVC

• Color: Aqua
• Cable Type: Stranded SSTP
• Wiring Scheme: 568B
• Temperature Rating: 75°C
• Size: 10 ft.
• Weight : 0.142 lbs

Protect a high speed network from noise and electromagnetic interference when connecting with our Snagless Shielded Cat6 patch cable. For voice/data/video distribution, this cable will handle bandwidth-intensive applications and drastically reduces both impedance and structural return loss (SRL). Each patch cable is fully tested to meet ANSI/TIA 568 C.2 Cat6 component requirements. Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high quality cable and plugs, this design minimizes Near-End Crosstalk (NEXT) levels.

• Conductor Type: 26AWG (7/0.16) (bare copper)
• Insulation: FM-PE

• Foil shield: Aluminum foil (100% coverage)
• Braided shield: Copper braid (40% coverage)
• Jacket: PVC

• Connector Type: RJ-45 Male
• Shell: Nickel plated for shielding
• Housing: Polycarbonate
• Contacts: 50µm gold plated
• Hood: Molded Snagless PVC

• Color: Gray
• Cable Type: Stranded SSTP
• Wiring Scheme: 568B
• Temperature Rating: 75°C
• Size: 15 ft.
• Weight : 0.462 lbs

CAT6 UTP RJ45 Molded Slim Gigabit Patch Cable

This Cat6 UTP cable with RJ45 connectors is recommended for connecting network components like printers, computers, copiers, routers, servers, modems and switches in high-density data centers. Designed for fast transmission and excellent signal quality, this seven-foot blue cable ensures peak performance throughout your local area network (LAN).

This Cat6 UTP patch cord is more than 38% smaller in diameter than standard Cat6 cable. This increases airflow in tight spaces, which helps keep your equipment cool and properly functioning. It also makes the cable easier to install around corners and through cable management panels.

• Color: Blue
• Cable Type: Category 6
• Cable Characteristic: Patch Cable
• Cable Length: 7 ft.
• Connector on First End: 1 x RJ-45 Male Network
• Connector on Second End: 1 x RJ-45 Male Network
• Connector Plating: Gold
• Device Supported: Network Device, Printer, Photocopier, Router, Server, Computer, Modem, Switch, Workstation
• American Wire Gauge: 28 AWG
• Data Transfer Rate: 128 MB/s
• Weight: 0.12 lbs

• 50-micron gold connectors ensure optimum conductivity while eliminating network signal loss due to oxidation or corrosion
• Molded strain relief prevents the cable from being bent at sharp angles at the RJ45 connector, to minimize the stress at the plug termination point
• Molded RJ45 connectors
• Carefully constructed and tested, to keep Near End Crosstalk (NEXT) well within acceptable limits
• 7 ft. White Molded Cat6 ETL Verified UTP Patch Cable

• Weight: 0.22 lbs

For fast Ethernet and Gigabit computer networks that require bandwidth-intensive voice, data, or video distribution applications. Meets all Cat6 TIA/EIA standards, and drastically reduces both impedance and structural return loss (SRL). Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high quality copper cable, this design minimizes Near-End Crosstalk (NEXT) levels. The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief.

• Snagless design protects clips when plugging and unplugging
• Standard RJ45 connectors and unshielded twisted pair wires

• Conductor Type - 24AWG (7/0.20), Stranded Bare Copper
• Insulation - H-D PE
• Diameter - 0.98 ± 0.05 mm

• Connector Type - 8P8C (RJ45)
• Connector Material - Polycarbonate
• Contact Material - Copper Alloy, Gold Plating - 50µm
• Hood Material - Molded PVC

• Jacket - PVC
• Minimum Average Thickness - 0.60mm
• Outer Diameter - 6.20 ± 0.30 mm

• Color: Pink
• Conductor DC Resistance: 9.38 Ohm 100m (maximum)
• Impedance: 100 Ohm
• Capacitance: 5600pf/100m
• Voltage Rating: 30V
• Temperature Rating: 60°C
• Size: 10 ft.
• Weight : 0.299 lbs

This Snagless Shielded Cat6a patch cable is ideal for use with 10GBase-T ports and equipment, such as network adapters, hubs, switches, routers, DSL/cable modems and patch panels, and will protect a high speed 10 Gigabit network connection from noise and electromagnetic interference. For voice/data/video distribution, this cable will handle bandwidth-intensive applications and drastically reduces both impedance and structural return loss (SRL). Each patch cable is fully tested to meet ANSI/TIA 568 C.2 Cat6a component requirements. Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high quality cable and plugs, this design minimizes Near-End Crosstalk (NEXT) levels.

• Conductor Type: 26AWG (7/0.16) (bare copper)
• Insulation: FM-PE
• Foil shield: Aluminum foil (100% coverage)
• Braided shield: Copper braid (40% coverage)
• Jacket: PVC
• Connector Type: RJ-45 Male
• Shell: Nickel plated for shielding
• Housing: Polycarbonate
• Contacts: 50µm gold plated
• Hood: Molded Snagless PVC
• Color: Gray
• Cable Type: Stranded SSTP
• Wiring Scheme: 568B
• Temperature Rating: 75°C
• Size: 3 ft.
• Weight: 0.128 lbs

1 ft. Cat6 Green Molded RJ45 UTP Gigabit Patch Cable & Cord

• Weight: 0.17 lbs

• 1 ft. Cat6 Green Molded RJ45 UTP Gigabit Patch Cable & Cord

CAT 6 500MHz UTP Cable - 100 FT White

Cat 6 cable is ideal for your voice, data, video and security network installation where extra bandwidth makes the difference. This popular cable meets or exceeds the EIA/TIA 568B performance requirements for Cat 6 cable.

Each cable is tested up to 500 MHz and is perfect for use with a 10/100Base-T, 1000Base-T and 10GBase-T high speed Ethernet network installation. That's why each and every cable is backed with the confidence of a lifetime performance guarantee!

This Snagless Unshielded Cat6a patch cable is ideal for use with 10GBase-T ports and equipment, such as network adapters, hubs, switches, routers, DSL/cable modems and patch panels, and enables 10 Gigabit data transmission over a 4 pair copper cable allowing connections up to 100 meters. Current Cat6 cabling systems may only support 10 Gigabit Ethernet over limited distances. Each patch cable is fully tested to meet ANSI/TIA 568 C.2 Cat6a channel requirements. Constructed from high quality cable and plugs, this design offers improved alien cross talk performance. The Snagless hood is ideal for high density switch applications.

• Conductor Type: 26AWG (7/0.16) (bare copper)
• Insulation: HD-PE

• Foil shield: Aluminum foil (100% coverage)
• Jacket: PVC

• Connector Type: RJ-45 Male
• Housing: Polycarbonate
• Contacts: 50µm gold plated
• Hood: Molded Snagless PVC

• Color: Gray
• Conductor DC Resistance: Stranded UTP
• Wiring Scheme: 568B
• Temperature Rating: 75°C
• Size: 2 ft.
• Weight : 0.088 lbs