Cat5e Ethernet cables of the 12 foot length have a variety of uses. These cables will suffice for connecting routers/switches to Cable/DSL modems computers to routers/switches or even in the server/network room for connecting ports on patch panels. These Ethernet Cables are great for the home office or any other environment.

This particular cable is a gray UTP (Unshielded Twisted Pair) patch cable with molded boots (snag less installation) and extra protection for the RJ45 connector and clip. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.

• End 1 - CAT5E Male Plug
• End 2 - CAT5E Male Plug
• Length - 12 ft.
• Color - Gray
• Wire - 24 AWG
• Weight - 0.30 lbs.

Cat5e Ethernet cables of the 10 foot length have a variety of uses. These cables will suffice for connecting routers/switches to Cable/DSL modems, computers to routers/switches or even in the server/network room for connecting ports on patch panels. These Ethernet Cables are great for the home office or any other environment.

This particular cable is a purple UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cable exceeds the EIA/TIA-568-C standard.

Cat6 Ethernet patch cables of the 7 foot length have a variety of uses. These cables will suffice for connecting routers/switches to Cable/DSL modems, computers to routers/switches or even in the server/network room for connecting ports on patch panels. These Ethernet Cables are great for the home office or any other environment. Cat6 cables are used for networking, data transfer, and phone lines. Cat6 Cable is used in network applications and has been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. This particular cable is a white UTP (Unshielded Twisted Pair) patch cable with clear plastic finger boots (snaggles installation) and extra protection for the RJ45 connector and clip while maintaining flexibility for the cable's life. Cat6 cable includes a spline to help ensure separation between the pairs which limits cross talk. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat6 patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat6 Ethernet patch cables exceed the ANSI/TIA-568.2-D standard.

• End 1: RJ45 Male Plug
• End 2: RJ45 Male Plug
• Length: 7 feet
• Color: White
• Wire Gauge: 24 AWG
• Weight: 0.26 lbs

Enhance signal integrity with the Cmple HDMI Cable. Ferrite cores filter out noise and reduce line interference caused by stray RF signals. This cable connects HDMI devices for DVD, satellite boxes, LCD, projectors, plasma and HDTVs. HDMI supports standard, enhanced, or high-definition video, plus multi-channel digital audio on a single cable. It transmits all ATSC HDTV standards and supports 8-channel digital audio.

• Connector Type: HDMI male to HDMI male
• Connector Finish: Gold
• Length: 10ft
• # of conductors: 19
• Conductor Plating: Tin
• Shielding type: EMI
• Supported Resolutions: 480i to 1080p
• HDMI Certified: Yes
• HDCP Compliant: Yes
• CEC Compliant: Yes
• ROHS Compliant: Yes
• 1.3 Device Compatible: Yes
• Supports DVD Audio: Yes
• Supports SACD: Yes
• Voltage Rating: 30V
• Shielding level: Triple
• Temperature Rating: 80œ C
• Rated Bandwidth: tested to 165 Mhz
• Supports TrueHD & DTS-HD: Yes

• Ferrite magnets for reducing line interference caused by stray RF signals
• Connects HDMI devices for DVD, satellite boxes, LCD, projectors, plasma and HDTVs
• Supports standard, enhanced, or high-definition video, plus multi-channel digital audio on a single cable
• Transmits all ATSC HDTV standards and supports 8-channel digital audio

AddOn is transceivers are built to meet or exceed the OEM's specifications, and comply with MSA “Multi-Source Agreement” standards. All products are 100 % functionally tested, and are guaranteed compatible. AddOn is industry-standard SFP is a hot-swappable input and output device that plugs into a Gigabit Ethernet slot, linking the port with the fiber-optic network. AddOn transceivers “GBIC, SFP, SFP+, X2, XFP and XENPAK” are 100% compliant for all networking product lines, and are factory loaded with OEM specific configuration data required for networking compliance. These transceivers initialize and perform identically to the OEM transceivers and can be mixed and deployed with other OEM or 3rd party transceivers, for seamless network performance. It is a Juniper compatible SFP module with following features - 1000BASE-T, 10/100/1000 MBps Data Rate, RJ-45 Connector, Copper, Distance up to 100 meters “328 feet”.

• Device Type - SFP “mini-GBIC” transceiver module.
• Form Factor - Plug-in module.
• Connectivity Technology - Wired.
• Cabling Type - 1000Base-T.
• Data Link Protocol - Gigabit Ethernet.
• Interfaces - 1 x Ethernet 1000Base-T.
• Compatible Slots - 1 x SFP “mini-GBIC”.

AddOn network upgrades 7 m Laser-Optomized Multi-Mode fiber “LOMM” duplex LC/LC OM4 aqua patch cable offers backward compatibility with existing 50/125 equipment, intended for use with 10Gb Ethernet applications. In addition, this OM4 fiber transfers up to 550 meters using an 850nm Vertical Cavity Surface Emitting Laser “VCSEL”, and supports 2000 MHz/km EMB at 850 nm. This patch cable is suited for LAN's or SAN's, and is recommended for connection between fiber patch panels, hubs, switches, media converters and routers, etc. The low-smoke zero-halogen jacket protects from toxic and corrosive gases in badly ventilated spaces and other areas where it is most crucial. It also provides the fire protection needed to run within walls and air plenums eliminating the need for conduit.

• Network Cable Type - Patch cable - OM4.
• Technology - Fiber optic.
• Type of Fiber Optics - Multimode.
• Fiber Quantity - 2.
• Core / Cladding Diameter - 50 / 125 micron.
• Features - Halogen-free, Laser-optimized multimode fiber “LOMMF”.
• Length - 23 ft.
• Color - Aqua.
• Connector“s” - 2 x LC multi-mode - male.
• Connector“s” “Other Side” - 2 x LC multi-mode - male.

• Product Type - Network Cable
• Cable Characteristic - Patch Cable
• Cable Type - Category 6
• Connector Type on First End - RJ-45 Network - Male

• Product Name: Cat.6 UTP Patch Network Cable
• Product Type: Network Cable
• Cable Type: Category 6
• Cable Characteristic: Patch Cable
• Cable Length: 8.86 ft
• Connector Type on First End: RJ-45 Network - Male
• Connector on First End Details: 1 x RJ-45 Network - Male
• Connector Type on Second End: RJ-45 Network - Male
• Connector on Second End Details: 1 x RJ-45 Network - Male
• Contact Plating: Gold
• Device Supported: Network Device
• American Wire Gauge: 28 AWG
• Key Features: Stranded, Strain Relief, Tangle-free, Identification Label
• Product Color: Violet
• Environmentally Friendly: Yes

Core SWX BUR-IO-EXT 12" Extension cable for PMC Burano IO allows for moving the module (CSX-BUR-IO) to another location on the camera rig(not required). The "12 in. Extension Cable for Burano Input & Output Module" provides a reliable connection solution for extending the reach of input and output modules. Designed for seamless integration with Burano systems, this cable ensures efficient data transmission and robust performance. Its durable construction and precise compatibility make it ideal for enhancing flexibility in various setups and applications.

• Length: 12"
• Modulation Mode: Input & Output
• Color: Black
• Weight: 0.8 lbs

Our Steel Armored Fiber Optic Cable features Rodent Resistant Spiral Steel Armor, 6 strands of OM1 62.5/125um Multimode Corning InfiniCor 300 core, and an orange plenum rated jacket. This armored cable consists of 0.9mm tight buffered fiber surrounded by an Aramid yarn (similar to Kevlar) strength member. The core is protected by a spiral-wrapped steel tube that offers an easy installation, rodent protection, and high crush, pressure, and tension resistance during installation and deployment. Indoor Plenum rated cabling is primarily used in building wiring applications, it can be Installed in walls, between floors, in plenum air handling ducts, and under data center floors. Common Applications include Fiber To The Home (FTTH) access networks, Telecommunication Networks, CCTV Networks, Data communications Networks, Local Area Networks, and more.

• Fiber Optic Cable
• Adapter

• End 1: Bare end
• End 2: Bare End
• Length: 500 Feet
• Color: Orange
• Fiber Count: 6 Cores
• Fiber Type: CorningInfiniCor300
• Cable Type: 900um Tight Buffered
• Buffer Material: PVC
• Strength Member: Aramid Yarn
• Armor: Spiral Steel
• Cable Color: Orange
• Jacket Rating: Plenum Rated
• Core Size: 62.5um
• Wavelength: 850nm / 1300nm
• Max. Attenuation: 3.5 / 1.5 dB/km
• Bandwidth(EMB): 850nm- 200MHz
• Cladding Diameter(um): 125±2.0
• Core-Clad Concentricity: 1.5 um
• Cladding non-circularity(Percentage): 0.1.0
• Coating-Cladding Concentricity(um): 12.0
• Coating Diameter(um): 242±5
• Core Diameter(um): 62.5±2.5um
• 850nm: 1.496
• 1300nm: 1.491
• Fatigue Resistance Parameter(Nd): 20
• Temperature Dependence: -60-85 Deg C
• Temperature-Humidity Cycling: -10 to +85 Deg C,98 Percentage R.H.
• Weight: 23 lbs