Cat5e Riser CMR 1000 ft. 24 AWG Unshielded Twisted Pair UTP Solid Bare Copper & ETL Listed 350 MHz Ethernet PVC Cable, Pink - Set of 8

Slim Cat6 Ethernet cables of the 6 foot length have a variety of uses. These cables will suffice for connecting routers/switches to Cable/DSL modems, computers to routers/switches or even in the server/network room for connecting ports on patch panels. These Ethernet Cables are great for the home office or any other environment.

Cat6 cables are used for networking, data transfer, and phone lines. Cat6 Cable is used in network applications and has been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products.

This particular cable is a black UTP (Unshielded Twisted Pair) patch cable with translucent clear boot (snagless installation) and extra protection for the RJ45 connector and clip. Cat6 cable includes a spline to help ensure separation between the pairs which limits cross talk. The connectors are wired to the T568B standard. The individual conductors are 28AWG (American wire gauge) stranded pure copper. Cat6 patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat6 Ethernet patch cables exceed the EIA/TIA-568-C standard.

• Color: Black
• End 1: Cat6 Male Plug
• End 2: Cat6 Male Plug
• Length: 6 feet
• Wire Gauge: 28 AWG
• Shield Type: unshielded
• Weight: 0.1 lbs

This Snagless Unshielded Cat6a patch cable is ideal for use with 10GBase-T ports and equipment, such as network adapters, hubs, switches, routers, DSL/cable modems and patch panels, and enables 10 Gigabit data transmission over a 4 pair copper cable allowing connections up to 100 meters. Current Cat6 cabling systems may only support 10 Gigabit Ethernet over limited distances. Each patch cable is fully tested to meet ANSI/TIA 568 C.2 Cat6a channel requirements. Constructed from high quality cable and plugs, this design offers improved alien cross talk performance. The Snagless hood is perfect for high density switch applications.

• Color: Black
• Cable Length: 100 ft
• Cable Type: Category 6a
• Connector on First End: RJ-45 Male Network
• Connector on Second End: RJ-45 Male Network
• Product Type: Network Cable
• Weight: 0.25 lbs

For fast Ethernet and Gigabit computer networks that require bandwidth-intensive voice, data, or video distribution applications. Meets all Cat6 TIA/EIA standards, and drastically reduces both impedance and structural return loss (SRL). Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high quality copper cable, this design minimizes Near-End Crosstalk (NEXT) levels. The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief.

• Snagless design protects clips when plugging and unplugging
• Standard RJ45 connectors and unshielded twisted pair wires

• Conductor Type - 24AWG (7/0.20), Stranded Bare Copper
• Insulation - H-D PE
• Diameter - 0.98 ± 0.05 mm

• Connector Type - 8P8C (RJ45)
• Connector Material - Polycarbonate
• Contact Material - Copper Alloy, Gold Plating - 50µm
• Hood Material - Molded PVC

• Jacket - PVC
• Minimum Average Thickness - 0.60mm
• Outer Diameter - 6.20 ± 0.30 mm

• Color: Purple
• Conductor DC Resistance: 9.38 Ohm 100m (maximum)
• Impedance: 100 Ohm
• Capacitance: 5600pf/100m
• Voltage Rating: 30V
• Temperature Rating: 60°C
• Size: 2 ft.
• Weight : 0.067 lbs

This Snagless Unshielded Cat6a patch cable is ideal for use with 10GBase-T ports and equipment, such as network adapters, hubs, switches, routers, DSL/cable modems and patch panels, and enables 10 Gigabit data transmission over a 4 pair copper cable allowing connections up to 100 meters. Current Cat6 cabling systems may only support 10 Gigabit Ethernet over limited distances. Each patch cable is fully tested to meet ANSI/TIA 568 C.2 Cat6a channel requirements. Constructed from high quality cable and plugs, this design offers improved alien cross talk performance. The Snagless hood is ideal for high density switch applications.

• Conductor Type: 26AWG (7/0.16) (bare copper)
• Insulation: HD-PE

• Foil shield: Aluminum foil (100% coverage)
• Jacket: PVC

• Connector Type: RJ-45 Male
• Housing: Polycarbonate
• Contacts: 50µm gold plated
• Hood: Molded Snagless PVC

• Color: Gray
• Conductor DC Resistance: Stranded UTP
• Wiring Scheme: 568B
• Temperature Rating: 75°C
• Size: 20 ft.
• Weight : 0.514 lbs

This Snagless Shielded Cat6a patch cable is ideal for use with 10GBase-T ports and equipment, such as network adapters, hubs, switches, routers, DSL/cable modems and patch panels, and will protect a high speed 10 Gigabit network connection from noise and electromagnetic interference. For voice/data/video distribution, this cable will handle bandwidth-intensive applications and drastically reduces both impedance and structural return loss (SRL). Each patch cable is fully tested to meet ANSI/TIA 568 C.2 Cat6a component requirements. Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high quality cable and plugs, this design minimizes Near-End Crosstalk (NEXT) levels.

• Conductor Type: 26AWG (7/0.16) (bare copper)
• Insulation: FM-PE

• Foil shield: Aluminum foil (100% coverage)
• Braided shield: Copper braid (40% coverage)
• Jacket: PVC

• Connector Type: RJ-45 Male
• Shell: Nickel plated for shielding
• Housing: Polycarbonate
• Contacts: 50µm gold plated
• Hood: Molded Snagless PVC

• Color: Aqua
• Cable Type: Stranded SSTP
• Wiring Scheme: 568B
• Temperature Rating: 75°C
• Size: 10 ft.
• Weight : 0.142 lbs

Protect a high speed network from noise and electromagnetic interference when connecting with our Snagless Shielded Cat6 patch cable. For voice/data/video distribution, this cable will handle bandwidth-intensive applications and drastically reduces both impedance and structural return loss (SRL). Each patch cable is fully tested to meet ANSI/TIA 568 C.2 Cat6 component requirements. Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high quality cable and plugs, this design minimizes Near-End Crosstalk (NEXT) levels.

• Conductor Type: 26AWG (7/0.16) (bare copper)
• Insulation: FM-PE

• Foil shield: Aluminum foil (100% coverage)
• Braided shield: Copper braid (40% coverage)
• Jacket: PVC

• Connector Type: RJ-45 Male
• Shell: Nickel plated for shielding
• Housing: Polycarbonate
• Contacts: 50µm gold plated
• Hood: Molded Snagless PVC

• Color: Gray
• Cable Type: Stranded SSTP
• Wiring Scheme: 568B
• Temperature Rating: 75°C
• Size: 15 ft.
• Weight : 0.462 lbs

• 50-micron gold connectors ensure optimum conductivity while eliminating network signal loss due to oxidation or corrosion
• Molded strain relief prevents the cable from being bent at sharp angles at the RJ45 connector, to minimize the stress at the plug termination point
• Molded RJ45 connectors
• Carefully constructed and tested, to keep Near End Crosstalk (NEXT) well within acceptable limits
• 7 ft. White Molded Cat6 ETL Verified UTP Patch Cable

• Weight: 0.22 lbs

For fast Ethernet and Gigabit computer networks that require bandwidth-intensive voice, data, or video distribution applications. Meets all Cat6 TIA/EIA standards, and drastically reduces both impedance and structural return loss (SRL). Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high quality copper cable, this design minimizes Near-End Crosstalk (NEXT) levels. The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief.

• Snagless design protects clips when plugging and unplugging
• Standard RJ45 connectors and unshielded twisted pair wires

• Conductor Type - 24AWG (7/0.20), Stranded Bare Copper
• Insulation - H-D PE
• Diameter - 0.98 ± 0.05 mm

• Connector Type - 8P8C (RJ45)
• Connector Material - Polycarbonate
• Contact Material - Copper Alloy, Gold Plating - 50µm
• Hood Material - Molded PVC

• Jacket - PVC
• Minimum Average Thickness - 0.60mm
• Outer Diameter - 6.20 ± 0.30 mm

• Color: Pink
• Conductor DC Resistance: 9.38 Ohm 100m (maximum)
• Impedance: 100 Ohm
• Capacitance: 5600pf/100m
• Voltage Rating: 30V
• Temperature Rating: 60°C
• Size: 10 ft.
• Weight : 0.299 lbs

This Snagless Shielded Cat6a patch cable is ideal for use with 10GBase-T ports and equipment, such as network adapters, hubs, switches, routers, DSL/cable modems and patch panels, and will protect a high speed 10 Gigabit network connection from noise and electromagnetic interference. For voice/data/video distribution, this cable will handle bandwidth-intensive applications and drastically reduces both impedance and structural return loss (SRL). Each patch cable is fully tested to meet ANSI/TIA 568 C.2 Cat6a component requirements. Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high quality cable and plugs, this design minimizes Near-End Crosstalk (NEXT) levels.

• Conductor Type: 26AWG (7/0.16) (bare copper)
• Insulation: FM-PE
• Foil shield: Aluminum foil (100% coverage)
• Braided shield: Copper braid (40% coverage)
• Jacket: PVC
• Connector Type: RJ-45 Male
• Shell: Nickel plated for shielding
• Housing: Polycarbonate
• Contacts: 50µm gold plated
• Hood: Molded Snagless PVC
• Color: Gray
• Cable Type: Stranded SSTP
• Wiring Scheme: 568B
• Temperature Rating: 75°C
• Size: 3 ft.
• Weight: 0.128 lbs

1 ft. Cat6 Green Molded RJ45 UTP Gigabit Patch Cable & Cord

• Weight: 0.17 lbs

• 1 ft. Cat6 Green Molded RJ45 UTP Gigabit Patch Cable & Cord

This Snagless Unshielded Cat6a patch cable is ideal for use with 10GBase-T ports and equipment, such as network adapters, hubs, switches, routers, DSL/cable modems and patch panels, and enables 10 Gigabit data transmission over a 4 pair copper cable allowing connections up to 100 meters. Current Cat6 cabling systems may only support 10 Gigabit Ethernet over limited distances. Each patch cable is fully tested to meet ANSI/TIA 568 C.2 Cat6a channel requirements. Constructed from high quality cable and plugs, this design offers improved alien cross talk performance. The Snagless hood is ideal for high density switch applications.

• Conductor Type: 26AWG (7/0.16) (bare copper)
• Insulation: HD-PE

• Foil shield: Aluminum foil (100% coverage)
• Jacket: PVC

• Connector Type: RJ-45 Male
• Housing: Polycarbonate
• Contacts: 50µm gold plated
• Hood: Molded Snagless PVC

• Color: Gray
• Conductor DC Resistance: Stranded UTP
• Wiring Scheme: 568B
• Temperature Rating: 75°C
• Size: 2 ft.
• Weight : 0.088 lbs

Featuring a rounded design, this SATA hard drive power cable helps improve airflow inside your computer. It provides less resistance as air passes around the SATA cable ensuring cooling for optimized system performance. The latching SATA cable features locking connectors that help prevent accidental disconnections when connected to your SATA drives.

Compliant with SATA 6Gb/s specifications, this SATA cord supports fast data transfer rates of up to 6Gbps when used with SATA 3.0 compliant drives. conducts thorough compatibility and performance testing on all our products to ensure we are meeting or exceeding industry standards and providing high-quality products to our customers. Our local Technical Advisors have a broad product expertise and work directly with Engineers to provide support for our customers both pre and post-sales.

• Round cable with straight latching connectors
• Supports fast data transfer rates of up to 6Gbps when used with SATA 3.0 compliant drives
• Fully compliant with SATA 6Gb/s Specifications
• This 0.3 m round SATA cable provides a secure connection to your SATA drives while ensuring optimal airflow throughout your desktop or server case

• Cable Jacket Material: PVC
• Type & Rate: SATA III (6 Gbps)
• Connector A: 1 - SATA (7 pin, Data) Latching Receptacle
• Connector B: 1 - SATA (7 pin, Data) Latching Receptacle
• Cable Length: 11.8 in [300 mm]
• Color: Black
• Connector Style: Straight
• Wire Gauge: 30 AWG
• Weight: 0.05 lbs

The TX6 Patch Cable is a high-quality CAT 6 patch cable that is perfect for your networking needs. It features a UTP technology and a T568B wiring scheme, ensuring reliable and fast connections. The cable is made with stranded wires and is halogen-free, making it safe to use. It also has gold plated connectors for enhanced performance. With a length of 7 ft., this cable provides flexibility in setting up your network. The cable has male RJ-45 connectors on both ends, making it compatible with various devices. Its vibrant yellow color adds a pop of color to your setup. The cable has dimensions of 295 x 155 x 20 in. and weighs only 0.1 lbs.

• Type - Patch cable - CAT 6.
• Technology - UTP.
• Wiring Scheme - T568B.
• Wires per Cable - 8 wires.
• Features - Stranded, halogen-free, booted, gold plated connectors.
• Length - 7 ft.
• Connectors - 1 x RJ-45 - male.
• Connectors (Other Side) - 1 x RJ-45 - male.
• Color - Yellow.
• Dimension - 295 x 155 x 20 in.
• Item Weight - 0.1 lbs.

• High-quality CAT 6 patch cable.
• Stranded wires for flexibility.
• Halogen-free for safety.
• Gold plated connectors for enhanced performance.
• 7 ft. length for easy setup.
• Male RJ-45 connectors on both ends.
• Vibrant yellow color.
• Dimensions of 295 x 155 x 20 in.
• Weighs only 0.1 lbs.

Axiom offers a full line of efficient & effective cabling solutions for your networking project. We use only the finest components and the latest construction technologies to optimize cable performance and ensure compliance to industry specifications for each cable and its designated application.

• Flame-Retardant Jacket
• Polished end-face quality to IEC 61300-3-35 standard
• 12 fibers
• Push on / Pull-off latching connector
• Precision guide pin assures fiber alignment
• 9/125 SMF cable, MPO/MTP Female connectors at both ends

• 1 - 12 2 - 11 3 - 10 4 - 9 5 - 8 6 - 7 7 - 6 8 - 5 9 - 4 10 - 3 11 - 2 12 - 1

• Color: Yellow
• Cable Type: Fiber Optic
• Fiber Optic Mode: Single-mode
• Core/Cladding Diameter: 9/125 µm
• Cable Length: 26.25 ft. .
• Connector on First End: 2 x MTP/MPO Female Network
• Connector on Second End: 2 x MTP/MPO Female Network
• Features: Flame Retardant , Locking Latch
• Device Supported: Network Device
• Environmentally Friendly: Yes
• Environmental Certification: RoHS
• Fiber Count: 12
• Jacket Type/Flame Rating: Riser
• Termination Type/Polarity: Rolled - Key up / Key up Pin 1-12 style
• Compliance: RoHS Compliant, TIA/EI942, ISO/IEC 24764, EN 50173-5
• Insertion Loss, Typical: 0.1dB SM
• Return Loss, Maximum: -55dB
• Weight: 0.19 lbs

If you are a gadget lover, our Electronics catalog is your dream destination. Choose from hundreds of gadgets and accessories to suit different uses and add some entertainment, facility and convenience to your life.

• Size: 2 ft.
• Color: Orange

This is a 4m LC (male) to LC (male) yellow duplex riser-rated fiber patch cable. OS1 is a standard single-mode optical fiber commonly used with wavelengths of 1310nm and 1550nm (size 9/125 microns), and has a maximum attenuation of 1dB/km. The OS1 standard is defined inISO/IEC 11801. This optical fiber, nonconductive, riser (OFNR) cable is best suited for use in interior fiber-optic applications. A duplex cable is a two-strand fiber optic patch cable that works best with transceivers that both transmit and receive. Our patch cables are 100% compliant for all of your networking needs.

• Color: Yellow
• Compatible OEM: Industry Standard
• Connector: LC (Male) to LC (Male)
• Core/Cladding: 9/125µm
• Fiber Termination: UPC - Ultra Physical Contact
• Fiber Type: SMF
• Jacket Type: Riser
• Length: 13.1 ft.
• Media: Fiber
• Standard: OS1
• Strand Count: 2

Browse our collection of high quality, reliable and authentic Computer & Peripherals in desired configuration and compatibility. Whether you want to buy a new computer or add functionality to your computer, we have it all for you.

• Color: Purple
• Length: 14'

• Supports reliable ethernet network connections with poe
• 50-micron gold-plated connectors for a clear signal
• High-quality 24 awg copper wire

If you are a gadget lover, our Electronics catalog is your dream destination. Choose from hundreds of gadgets and accessories to suit different uses and add some entertainment, facility and convenience to your life.

• Cat6A Snagless Unshielded UTP Network Patch Ethernet Cable

• Color: Orange
• Length: 7 ft.
• Weight: 0.2 lbs

Browse our collection of high quality, reliable and authentic Computer & Peripherals in desired configuration and compatibility. Whether you want to buy a new computer or add functionality to your computer, we have it all for you.

• Color: Brown
• Voltage: 12V
• Weight: 0.26 lbs

• 11.81 8-Pin to 6 plus 2-pin gpu cable box