DSCL-SRW4-CGR Senior Bar Scale Chart with Resolution, Gray - Six Vector

• Maximum fiber distance of 550m
• Supports Full/Half-duplex Auto-Negotiation
• Includes low-profile/half-height installation bracket
• Compliant with IEEE802.3z 1000Base-SX, IEEE 802.1Q VLAN Tagging, IEEE 802.1P Layer 2 Priority Encoding, IEEE 802.3x full duplex flow control
• Supports RFC 1157 SNMP v1 for remote management
• Jumbo Frame Support
• Supports PCI Message Signaled Interrupt (MSI)
• Preboot Execution Environment (PXE) 2.1
• Supports Wake-on-LAN remote wake-up

HDMI 1.3a compliantHDCP compliantSupports 480i, 480p, 720p, 1080i, 1080p up to 1920x1200Supports deep Color up to 12 bitsMagnetic Mount

• HDMI 1.3a compliant
• HDCP compliant
• Supports 480i, 480p, 720p, 1080i, 1080p up to 1920x1200
• Supports deep Color up to 12 bits
• Magnetic Mount

• Size: 1 x 2 in.
• Weight: 2 lbs

Extends your 10/100/1000 Mbps Gigabit Ethernet connection up to 550 m (1,804 ft.) using fast LC multimode fiber optic cabling. , RJ45 jack supports auto-MDI/MDI-X to bridge various network devices Supports both full- and half-duplex operation LEDs indicate Ethernet and fiber link status at a glance Includes North America, U.K., Europe and Australia plug adapters Plug-and-play operation with no software or drivers required.

• Color: Black
• Size: 550 m
• Weight: 0.95 lbs

Certified CAT5e patch cables with the smallest of RJ-45 connectors make for the simplest of installations. These boot-less patch cables can provide you with just enough of the flexibility and maneuverability your crowded patch panels require. Suitable for 10/100Mbps Ethernet and many Gigabit over copper applications.

• Color: Black
• Length: 3 ft.

• Add reliable and cost-effective Gigabit Ethernet connections over multimode fiber with this Mini-GBIC
• Cisco GLC-SX-MMD Compatible SFP for 1000Base-SX compliant networks provides maximum distance of 500 m / 1640 ft and supports Digital Diagnostics Monitoring (DDM / DOM)
• Gigabit Fiber SFP transceiver module meets or exceeds OEM specifications and MSA industry standards and provides Lifetime Warranty
• TAA compliant allowing government GSA Schedule purchases
• Gb Fiber SFP / TAA Compliant Gigabit SFP / Cisco GLC-SX-MMD equivalent SFP / 1000Base-SX SFP / multi-mode SFP / Cisco compatible SFP / Mini-GBIC /Gigabit SFP / Gb transceiver / Fiber Transceiver

• Application/Usage: Optical Network
• Application/Usage: Data Networking
• Interfaces/Ports Details: 1 x LC Female Duplex 1000Base-SX Network
• Media Type Supported: Optical Fiber
• Fiber Mode Supported: Multi-mode
• Ethernet Technology: Gigabit Ethernet
• Network Technology: 1000Base-SX

If you are a gadget lover, our Electronics catalog is your dream destination. Choose from hundreds of gadgets and accessories to suit different uses and add some entertainment, facility and convenience to your life.

• 3 Mile PTP Plug & Play Outdoor Wireless Bridge System
• High quality construction and modern designs
• Superior quality performance and reliability

• Weight: 9.37 lbs

• Product Type - Expansion Module
• Ethernet Technology - Gigabit Ethernet
• Network Technology - 1000Base-T
• Interfaces/Ports Details - 24 x RJ - 45 1000Base-T Network LAN
• Maximum Data Transfer Rate - 1 Gbit/s
• Compatibility - HP 5400R zl2 Switch Series

The BH-B248A2B12D is a 12G+ high-density DIN 1.0/2.3 Coaxial bulkhead panel in 1RU with a 2x48 connector configuration. This unit features a 20 GHz high-bandwidth performance for SD/SDI, HD/SDI, 3 Gb/s, 3D, UHD, 4k, and 8K applications. It's constructed of 1/16" 0.062 In. / 1.57 Mm folded aluminum with a durable black powder-coat finish. This unit also features DIN 1.0/2.3 Connectors on both the front and back of the panel.

• Din 1.0/2.3 connectors on both the front and back of the panel
• Silk screened circuit numbering on both the front and back with al designation strip for the front
• Two 3 deep lacing bars for cable dressing
• Alternative 6 15.24 cm deep lacing bars

• Finish: Aluminum with a durable Powder - Coat
• Material: Stainless Steel

The ADDERLink ASP-001-US INFINITY Manager (AIM) server is a control suite which transforms ADDERLink INFINITY (ALIF) extenders into a digital matrix solution. Using standard IP infrastructure it is possible to route any user station to any computer attached to the network without any compromises to video quality or control. It allows co- operative sharing of computers and multicasting of video to any destination.

• Intuitive - multi-lingual user interface
• Multiple switching methods
• Configurable user access rights
• Full audit trail
• Easy centralized management
• Open API for 3rd party control
• Secure access and communications
• Redundant operation
• User access rights management and audit trails
• Easy centralized management
• Control Channel and Presets connections
• Internationalization
• On-screen display at each user station
• Remote OSD
• Choice of connection modes
• Fast video and USB switching
• Multicasting
• USB sharing
• Considered as a virtual transmitter - a channel may combine video - audio and USB from different transmitters as a single source
• Open API for 3rd party control systems
• LDAP integration
• SNMP v3 get / walk
• External NTP server support - NTPv42
• System backups
• Centralized firmware upgrades
• Easy matrix setup

• Dimension (LxWxD): 8.3 x 8.5 x 1.6" (210 x 215 x 40mm)
• Weight Capacity: 4Lbs (1.8kg)Power supply
• External power: 12VDC - 5A
• Typical power consumption: 20W
• BTU: 68.24BTU/hrTemperature
• Operating temperature: 0 to 40C/32 to 104F
• Storage temperature: 0 to 60C/32 to 140 F
• Humidity: 10-90% (non-condensing)Mean Time Between Failure (MTBF)
• Weight: 8.6 lbs

The Tempo NC-500 NETcat Pro2 is a digital cable and service verification tool for fast, accurate checking of cables, wiring, and network service. Operated using a back-lit touch screen display, the Pro not only tests wiring continuity and proper pair allocation, but measures the length of multi-pair cables, LAN, or coaxial cables by utilizing advanced high-speed Step TDR (time domain reflectometry). Additionally, the NETcat Pro determines if network service is up to Gigabit and displays whether Power over Ethernet is provisioned. When used with the NC-510 Accessory Kit containing seven (7) expansion remote test modules, the NETcat Pro can uniquely test coax or twisted pair jacks from a central location, eight (8) at a time. Using a fingertip or the built-in stylus, the screen can be used to control and display a range of tests from fault finding the wire-map, to TDR length measurement.

• CAT 5 and up cabling (both shielded and unshielded) plus coaxial cables can be tested
• Pair tracing tones can be generated and applied to various combinations of wires to aid detection
• Test and troubleshoot telephone, data, and coax wiring
• Detect split pairs, short circuits, broken, and crossed wires
• Step TDR technology shows length to open or short of all pairs
• Large icons ensure easy use with your finger too
• Backlit touch-screen used to control all functions
• Included stylus slots into main unit
• Tone generator with four selectable precision frequency tones
• Identifies active network devices on 10/100/1000 Base-T Ethernet
• Identifies PoE (source device detection)
• Memo Pad/reminder feature stored in non-volatile memory
• Field replaceable "F" type connector
• Graphical touch screen display with contrast adjustment and backlight
• Tests shielded twisted pair (STP), unshielded twisted pair (UTP), and coaxial cables
• 0-2,000 foot (600 Meter) cable length via step TDR
• Sub-nanosecond resolution ensures this cable verifier is one of the most precise
• Patch cable and remote jack wire-and identification using the self-contained
• Detects shorts, opens, reversed, crossed, and split pairs
• Office identification using remote ID units - up to 8 different IDs, one included
• Troubleshoots and verifies a wide range of networks
• Generate four distinct, precision tones for tracing low-loss cables like Cat 5
• Operates on a single 9V battery, with low battery indicator
• Compatible with Tempo precision digital probes

• Battery: 9 V Alkaline Battery (PP3) (Not Included)
• Display: 128 x 128 pixel
• Remote Identifier: 2,000 ft.
• Wiremap: 358 ft.
• Weight: 0.45 lbs