Store Offer Menu

CouponsDeals
  • Image
    Milwaukee Tools MLW45-34-9006 0.25 in. Drive & 0.34 in. SAE 6-Point Socket, Steel, Chrome

    Milwaukee Tools MLW45-34-9006 0.25 in. Drive & 0.34 in. SAE 6-Point Socket, Steel, Chrome

    Product information for Milwaukee Tools MLW45-34-9006 0.25 in. Drive & 0.34 in. SAE 6-Point Socket, Steel, Chrome

    $11.78
    $5.9849% OFF

    Our 1/4" Drive SAE 6-Point Socket with FOUR FLAT™ Sides was designed from the ground up to be part of the most versatile socket family. MILWAUKEE® ¼” drive sockets feature an innovative design with four parallel flat sides, which deter rolling and are wrench-compatible. The SAE socket sizes are stamped into the flats providing you with improved, easy-to-read visibility. These deep and standard socket sizes have optimized geometry to reduce bolt rounding and stripping. We back all our ¼” drive SAE sockets. Our 1/4" drive SAE sockets range from 5/32" to 9/16” in standard and deep well sockets.

    Features
    • FOUR FLAT™ sides deter rolling
    • Wrench-ready FOUR FLAT™ sides
    • Stamped sizes for better visibility
    • Optimized geometry to prevent rounding
    • 6-Point socket
    Specifications
    • Material: Steel
    • Finish: Chrome
    • Drive Socket Size: 1/4 in.
    • SAE Standard 11/32 in.
    • Weight: 0.0306 lbs
    Get Deal

    • More Deals You’ll Love

    Unbeatable Sale logo

    Accessories .38in. Impact Ready Socket Adaptor DW...

  • Socket adaptor
  • Designed for use with cordless impact drivers
  • .25" hex
  • Impact ready
  • .38" drive
  • Carded
  • Length: 4.78
  • Width: 0.75
  • Height: 1.87
    • $9.67
    $4.7851% OFF
    Get Deal
    See more Unbeatable Sale deals
    Unbeatable Sale logo

    329-80132.25 in. Drive 6 Point Standard Metric Soc...

    Features
    • Surface drive technology reduces fastener rounding
    • Chamfered opening to guide fastener into socket
    • Large hard-stamped size identification
    • Double line (SAE) and knurled (metric) ring to easily identify standard vs. Metric sockets
    • Full polish chrome finish cleans easily and resists corrosion
    Specification
    • SAE/Metric/Torx - Metric
    • Fastener Size - 10 mm.
    • Drive Type - 6 Point
    • Drive Tang Size - 1/4 in.
    • Length Format - Standard
    $11.53
    $5.8849% OFF
    Get Deal
    See more Unbeatable Sale deals
    Unbeatable Sale logo

    Sunex SUN814MD .25in. Drive 6 Point Deep Impact So...

    No doubt, Sunex tools offer one of the most complete and toughest Impact Socket lines around. This 1/4" drive 14mm 6 point deep socket is designed to tackle the toughest jobs with solid durability and keeps them pounding job after job. Also it features a
    $12.44
    $6.7046% OFF
    Get Deal
    See more Unbeatable Sale deals
    Unbeatable Sale logo

    2014R .5 Inch Drive X .44 Inch Standard

    Grey Pneumatic Sockets are designed with increased strenght, increased torque, easier access to tight areas and reduced wear.

    Features
    • The sockets are made from high quality alloy (chrome-molybdenum)
    • They are heat treated to provide the correct balance of strength and durability
    • The impact socket's "high torque" drive provides increased strength through the transfer of pressure from the thinnest part of the socket wall toward the thicker section
    • The sockets feature 20 percent more torque than on standard hex impact sockets
    • There is an increase to tight areas through pressure shift to reduce the socket wall thickness
    • There is a reduced wear and chance of rounding off fasteners by the grip the sockets provide on the fastener across a broader contact area
    Specifications
    • Safety Info - Always wear safety goggles when using Impact Tools.Use only properly matched fractional or metric sizes
    • Socket Length - Standard
    $12.96
    $7.1745% OFF
    Get Deal
    See more Unbeatable Sale deals
    Unbeatable Sale logo

    HL614 Locking Bit Holder - 0.37 in.

    We are dedicated to give everyone the very best houseware products for all home needs, with a focus on dependability, our client satisfaction and great quality. We provide high-quality modern products to be enjoyed by many clients.

    Features
    • The locking bit socket drives standard 1/4" hex bits, including power drive bits
    • The sliding rear sleeve allows for quick release
    • The low profile of these holders makes them useful in restricted spaces
    Specifications
    • Size: 0.37"
    • Weight: 0.05 lbs
    $16.33
    $9.0445% OFF
    Get Deal
    See more Unbeatable Sale deals
    Unbeatable Sale logo

    .50in. Pro Style Socket Holders With Handles W3200...

  • Chrome plated clips and rail
  • Heavy duty angles plastic handle
  • 16 clips per rail
  • .50"
  • Carded
  • Length: 1.4
  • Width: 20
  • Height: 2.5
    • $14.83
    $8.2844% OFF
    Get Deal
    See more Unbeatable Sale deals
    Unbeatable Sale logo

    . GY9910F .25 in. Drive x .31 in. Hex Driver

  • Grey Pneumatic Impact Sockets are designed for professional tool users.
  • They are engineered specifically for use with impact tools, using the most up to date industrial specifications.
  • Grey Pneumatic Impact Sockets are made from high quality alloy steel (chrome-molybdenum).
  • Thorough and exact heat treatment insures the correct balance of strength and durability.
  • Grey Pneumatic Impact Sockets are tested to the highest specifications to deliver outstanding performance.

    Benefits of the Grey Pneumatic Impact Socket "High Torque" Drive.

  • Increased Strength-Transfers the pressure from the thinnest part of the socket wall toward the thicker section, resulting in increased strength.
  • Increased Torque-Allows up to 20% more torque to be applied than on standard hex impact sockets.
  • Easier Access to Tight Area-The shift in pressure allows us to reduce the socket wall thickness, increasing access to tight areas.
  • Reduced Wear-The impact sockets grip the fastener across a broader contact area, reducing the chance of rounding off fasteners.

    Specifications:

  • Hex Size: 5/16".
  • Drive End: .51".
  • Socket End: .83".
  • Length: 1.38".
    • $17.63
    $10.2242% OFF
    Get Deal
    See more Unbeatable Sale deals
    Unbeatable Sale logo

    0.38 Drive 11 Mm. Universal Met Imperial Socket

    Upgrade your toolkit with the 0.38 Drive 11 Mm. Universal Met Imperial Socket. This universal impact socket is forged from the finest Molybdenum alloy steel, ensuring strength and durability. Its radius corner design allows it to grab the sturdy wall or flat of the fastener, extending the life of your fasteners. With a lifetime warranty, this socket is a reliable addition to your collection.

    Specifications
    • Drive Size - 3/8 in. x 11 mm.
    • Item Weight - 0.23 lbs.
    Features
    • Forged from the finest Molybdenum alloy steel - the best choice for strength and durability.
    • Designed to extend the life of fasteners.
    • Features a radius corner design causing the socket to grab the sturdy wall, or flat, of the fastener instead of grabbing the corners. This results in less corner wear on the fastener.
    • Lifetime Warranty -- full replacement.
    $20.61
    $12.5639% OFF
    Get Deal
    See more Unbeatable Sale deals
    Unbeatable Sale logo

    Proto 577-7436H Skt Imp 1-2 Dr 1-1-8 6 P

    Professionals worldwide prefer Proto Industrial Tools for their outstanding quality durability and dependability. Professionals for heavy-duty industrial applications including auto-manufacturing plants steel and airplane manufacturing chemical plants refineries general manufacturing transportation and fleet maintenance for trucking transit and aircraft use Proto Industrial Tools. With a global distribution network Proto Industrial Tools are available on-the-job anywhere in the world.

    The TorquePlus internal design minimizes fastener rounding, helps to extend fastener life, and allows the user to more easily turn worn, rounded, or rusted fasteners .

  • Proto Impact Sockets are ideal for use on stubborn or damaged fasteners, and also on fasteners made from soft materials .
  • The TorquePlus design is a high performance drive configuration which allows for quick and easy socket engagement to the fastener flats, not the corners
    • $25.34
    $16.3735% OFF
    Get Deal
    See more Unbeatable Sale deals
    Unbeatable Sale logo

    . GY1017MD .38 in. Drive x 17MM Deep

    Sockets feature increased strength, torque, easier access to tight areas and reduced wear. They are designed to work specifically with impact tools.

  • The impact socket's "high torque" drive provides increased strength through the transfer of pressure from the thinnest part of the socket wall toward the thicker section.
  • The sockets feature 20 percent more torque than on standard hex impact sockets.
  • There is an increase to tight areas through pressure shift to reduce the socket wall thickness.
  • There is a reduced wear and chance of rounding off fasteners by the grip the sockets provide on the fastener across a broader contact area.
  • Socket Drive Size: 3/8".
  • Hex Size: 17 mm.
  • Socket Length: Deep.
  • Drive End: 24 mm.
  • Socket End: 24 mm.
  • Bolt Clearance Depth: 52 mm.
  • Hex Depth: 25 mm.
  • Length: 65 mm.
    • $9.95
    $6.9830% OFF
    Get Deal
    See more Unbeatable Sale deals
    Unbeatable Sale logo

    329-80701.5 in. Drive 12 Point Socket Set

    Features
    • 84 tooth full polish chrome thin profile ratchet
    • Knurled full polish chrome extensions
    • Sockets feature surface drive technology to reduce fastener rounding
    • Includes storage case
    • Full polish chrome sockets with large hard stamp size markings
    Specification
    • SAE/Metric/Torx - SAE/Metric
    • Drive Type - 12 Point
    • Drive Tang Size - 1/2 in.
    • Length Format - Standard/Deep
    • Finish - Full Polish Chrome
    • 49 Pieces
    $377.55
    $265.8230% OFF
    Get Deal
    See more Unbeatable Sale deals
    Unbeatable Sale logo

    GRE1910F .38in. Drive Fractional Hex Driver Impact...

    Each impact socket features high torque drives. This feature limits the amount of wear on the corners of the fastener and the socket. It also improves the strength of the socket, transfers increased torque to the fastener and allows easier access to tight
    $15.35
    $11.1228% OFF
    Get Deal
    See more Unbeatable Sale deals
    Unbeatable Sale logo

    50 in. Drive 39mm Deep 12 Point Impact Socket

  • Grey Pneumatic Sockets are designed with increased strenght, increased torque, easier access to tight areas and reduced wear.
  • The sockets are made from high quality alloy (chrome-molybdenum).
  • They are heat treated to provide the correct balance of strength and durability.
  • The impact socket's "high torque" drive provides increased strength through the transfer of pressure from the thinnest part of the socket wall toward the thicker section.
  • The sockets feature 20 percent more torque than on standard hex impact sockets.
  • There is an increase to tight areas through pressure shift to reduce the socket wall thickness.
  • There is a reduced wear and chance of rounding off fasteners by the grip the sockets provide on the fastener across a broader contact area.
  • Socket Drive Size: 1/2".
  • Socket Length: Deep.
  • Hex Size: 39mm.
  • 12 Point.
    • $34.06
    $25.8524% OFF
    Get Deal
    See more Unbeatable Sale deals
    Unbeatable Sale logo

    . GY1140TT .38 in. Drive x TT40 Tamper Proof Star ...

  • Grey Pneumatic Impact Sockets are designed for professional tool users.
  • They are engineered specifically for use with impact tools, using the most up to date industrial specifications.
  • Grey Pneumatic Impact Sockets are made from high quality alloy steel (chrome-molybdenum).
  • Thorough and exact heat treatment insures the correct balance of strength and durability.
  • Grey Pneumatic Impact Sockets are tested to the highest specifications to deliver outstanding performance.

    Benefits of the Grey Pneumatic Impact Socket "High Torque" Drive.

  • Increased Strength-Transfers the pressure from the thinnest part of the socket wall toward the thicker section, resulting in increased strength.
  • Increased Torque-Allows up to 20% more torque to be applied than on standard hex impact sockets.
  • Easier Access to Tight Area-The shift in pressure allows us to reduce the socket wall thickness, increasing access to tight areas.
  • Reduced Wear-The impact sockets grip the fastener across a broader contact area, reducing the chance of rounding off fasteners.

    Specifications:

  • Torx Size: TT40.
  • Drive End: .75".
  • Socket End: 1.21".
  • Length: 1.98".
  • Show in picture TT40.
    • $21.78
    $16.7523% OFF
    Get Deal
    See more Unbeatable Sale deals
    Unbeatable Sale logo

    . GY2034M .50 in. Drive x 34mm Standard

  • Grey Pneumatic Impact Sockets are designed for professional tool users.
  • They are engineered specifically for use with impact tools, using the most up to date industrial specifications.
  • Grey Pneumatic Impact Sockets are made from high quality alloy steel (chrome-molybdenum).
  • Thorough and exact heat treatment insures the correct balance of strength and durability.
  • Grey Pneumatic Impact Sockets are tested to the highest specifications to deliver outstanding performance.

    Benefits of the Grey Pneumatic Impact Socket "High Torque" Drive.

  • Increased Strength-Transfers the pressure from the thinnest part of the socket wall toward the thicker section, resulting in increased strength.
  • Increased Torque-Allows up to 20% more torque to be applied than on standard hex impact sockets.
  • Easier Access to Tight Area-The shift in pressure allows us to reduce the socket wall thickness, increasing access to tight areas.
  • Reduced Wear-The impact sockets grip the fastener across a broader contact area, reducing the chance of rounding off fasteners.
  • Hex Size: 34mm.
  • Drive End: 38mm.
  • Socket End: 46.0mm.
  • Bolt Clearance Depth: 31mm.
  • Hex Depth: 24mm.
  • Length: 50mm.
    • $15.42
    $11.8623% OFF
    Get Deal
    See more Unbeatable Sale deals
    Unbeatable Sale logo

    . GY2015UMD .50 Drive 15MM Universal Deep

    Sockets are designed with increased strength, increased torque, easier access to tight areas and reduced wear.

  • The sockets are made from high quality alloy (chrome-molybdenum).
  • They are heat treated to provide the correct balance of strength and durability.
  • The impact socket's "high torque" drive provides increased strength through the transfer of pressure from the thinnest part of the socket wall toward the thicker section.
  • The sockets feature 20 percent more torque than on standard hex impact sockets.
  • There is an increase to tight areas through pressure shift to reduce the socket wall thickness.
  • There is a reduced wear and chance of rounding off fasteners by the grip the sockets provide on the fastener across a broader contact area.
  • Socket Drive Size: 1/2".
  • Socket Length: Deep.
  • Hex Size: 15 mm.
  • Drive End: 28 mm.
  • Socket End: 23 mm.
  • Bolt Clearance Depth: 40 mm.
  • Hex Depth: 20 mm.
  • Length: 90 mm.
    • $28.90
    $22.2323% OFF
    Get Deal
    See more Unbeatable Sale deals
    Unbeatable Sale logo

    . GY2277AL .50 in. Female x .38 in. Male x 36 in. ...

    This 1/2" Drive Extra-Long Reducing Adapter is designed to work with Grey Pneumatic 1/2" Sockets and features a locking pin, which is a spring loaded pin.

    This drive adapter features a locking pin, which is a spring loaded pin. To use, line up with the socket retainer hole and press pin. To release the socket, insert object through the retainer hole and press the locking pin - then you are set to go.

  • Works with Grey Pneumatic 1/2" sockets.
  • Features a locking pin (spring loaded pin).
  • This adapter has been forged into a single piece allowing for extra strength and durability.
  • Male End 3/8".
  • Drive Size: (Female End) 1/2".
  • Socket Retention System Locking Pin.
  • Drive End: .98".
  • Length: 36".
    • $166.34
    $127.9523% OFF
    Get Deal
    See more Unbeatable Sale deals
    Unbeatable Sale logo

    MWK48-22-9403 0.375 in. Drive SAE 6 Point Low Prof...

    Quikrete Advanced Polymer Concrete Crack Sealant (No. 8620-17) is a solvent and isocyanate free line of high-performance, commercial-grade material that permanently seals and waterproofs cracks in concrete with textured matte finish. Designed to deliver or exceed the performance of traditional polyurethane or silicone sealants and adhesives, the single-component Quikrete Concrete Crack Sealant is an environmentally-friendly alternative that meets meet ASTM C920 standards.

    Specifications
    • Size: 0.375"
    • Weight: 1.36 lbs
    $46.76
    $35.9723% OFF
    Get Deal
    See more Unbeatable Sale deals
    Unbeatable Sale logo

    946QL .25 Inch Drive X 6 Inch Impact Locking Exten...

    .25 Inch Drive X 6 Inch Impact Locking Extension
    $38.83
    $29.8723% OFF
    Get Deal
    See more Unbeatable Sale deals
    Unbeatable Sale logo

    . GY3030MD .75 in. Drive x 30mm Deep

  • Grey Pneumatic Impact Sockets are designed for professional tool users.
  • They are engineered specifically for use with impact tools, using the most up to date industrial specifications.
  • Grey Pneumatic Impact Sockets are made from high quality alloy steel (chrome-molybdenum).
  • Thorough and exact heat treatment insures the correct balance of strength and durability.
  • Grey Pneumatic Impact Sockets are tested to the highest specifications to deliver outstanding performance.

    Benefits of the Grey Pneumatic Impact Socket "High Torque" Drive.

  • Increased Strength-Transfers the pressure from the thinnest part of the socket wall toward the thicker section, resulting in increased strength.
  • Increased Torque-Allows up to 20% more torque to be applied than on standard hex impact sockets.
  • Easier Access to Tight Area-The shift in pressure allows us to reduce the socket wall thickness, increasing access to tight areas.
  • Reduced Wear-The impact sockets grip the fastener across a broader contact area, reducing the chance of rounding off fasteners.
  • Hex Size: 30mm.
  • Drive End Diameter: 44mm.
  • Bolt Clearance Depth: 44mm.
  • Socket End Diameter: 63mm.
  • Hex Depth: 52mm.
  • Length: 85mm.
    • $29.08
    $22.3723% OFF
    Get Deal
    See more Unbeatable Sale deals
    Unbeatable Sale logo

    29066M .5 Inch Drive X 6Mm Hex Driver 6 Inch Lengt...

    Features
    • They are made from high quality alloy (chrome - molybdenum)
    • They are heat treated to provide the correct balance of strength and durability
    • Engineered to work with impact tools
    Specifications
    • Nut Driver Size - 1/2 in.
    • Hex Size - 6mm
    • System of Measurement - Metric, Fractional
    • Socket / Driver Rating - Impact Ready
    • Dimension - Drive End - 98 in. Socket End - 4.87 in. Length - 5.91 in.
    • Item Weight - 0.2400 lbs.
    $28.82
    $22.1723% OFF
    Get Deal
    See more Unbeatable Sale deals

    Subscribe to Unbeatable Sale coupon newsletter

    Get notified of offers and coupon codes from Unbeatable Sale before they expire!