RLS-MP213 Dual-Mic Preamp with XLR & 0.12 in. Inputs & Outputs

TM1 PLUS Measurement Microphone

The AUDIX TM1 Plus Makes a Measurable Difference Audix is proud to announce the introduction of the TM1 Plus, a combination kit which includes the TM1 measurement microphone, threaded acoustic windscreen, shock mount clip, ½ inch calibrator adaptor and microphone calibration data on CD. The data files are a numeric representation of the TM1 frequency response. These, together with the provided sensitivity of the microphone, can be used with a variety of popular software measurement systems to correct the response curve of the microphone. VP of Sales Cliff Castle states, "The TM1 has earned very high acceptance amongst sound engineers and sound designers who rely on measurement systems to properly tune a PA system for live sound venues, theatres, houses of worship, and a wide variety of installations. Measurement software packages have become very robust and are now able to take simultaneous measurements with multiple microphones, allowing sound designers a very accurate picture of how the PA system is reacting throughout a room in real time. With the TM1 Plus, customers are able to accumulate multiple microphones, essentially creating matched sets once the data files are input into the software measurement programs." The TM1 is a 6mm pre-polarized condenser microphone that is designed, assembled and tested by Audix in Wilsonville, Oregon. The microphone features a precision machined four stage brass body and capsule housing, low noise SMT circuit, nickel plate finish, field replaceable parts, Switchraft r XLR and shock absorbent O-rings. All accessory items for the TM1 are included in the TM1 Plus to make this kit an exceptional value.

• Smooth response sounding like a ribbon
• Wide frequency response
• Articulate natural mid range
• Perfect for broadcast studios
• Absolute best guitar amp microphone
• Properly positioned hum bucking coil and heavy steal case insure maximum shielding
• Assembled and tested in illinois

• Body: Steel body with zinc die-cast bottom ring
• Frequency Response: 40Hz to 18kHz
• Impedance: 600 ohms balanced

Cable management for 24 to 96 portsKnock-off mounting tabs fit all equipment - uses standard rack screw-hole patternMultiple Zero-U Spacemakers can be mounted on top of another or upside downNo need to disconnect existing terminations - eliminates risk of moving panels, cables and electronics.1. Back off screws2. Slide unit under screw heads3. Re-tighten.

• Saves up to 80% install labor time
• Requires no rack space - Zero-U!
• For new installs or retrofits
• Minimum bend radius maintained with cloth hook and eyerbrand fasteners
• Cables supported out in front of metal rack - maintains part access
• Supports cables at back of rack
• Pack of 10

• Capacity: Effectively Handles 24 cords or jumpers
• Materials: 16 gauge steel. Black powder coat finish
• Mounting: 19" rack mountable
• Dimensions: 5.25"H x 19.61"W x 3.75"D

The Earthworks Audio SR117 has the power and quality of a condenser microphone with the safety and familiarity of a dynamic. But that's only half of the story. Because of the fast and clean Frequency Response, the SR117 will not add any mud to the low frequencies or harshness to the highs. It is voiced with rich, clear lows, smooth vibrant mids and open airy highs ensuring that you will not limit or accentuate your voice in any abnormal ways. The overall sonic performance does not come at the expense of usability. The SR117 is built and designed for all situations-and for performers of every level. Whether this is your first microphone or your last, it is incredibly forgiving and safe to use. Use it with confidence on stage, during worship, recording and everywhere in between The same enhanced features that make SR117 the right choice for the biggest live venues also deliver in the smaller ones-including your home studio. Exceptional pattern control that's focused on eliminating feedback for live use also works wonders to control room noise when recording in rooms that haven't been perfectly treated.

• No trade-offs. No compromises
• High quality construction and modern designs
• At home in arenas. And home studios
• Works for any singer and voice, sounds natural and true
• Designed for live stage performances but works equally well for televised productions and worship
• Voiced with rich, clear lows, smooth vibrant mids and open airy highs
• The high SPL prevents clipping from even the most powerful vocalists
• Enhanced wind, plosive and sibilance protection
• Tight supercardioid polar pattern
• Excellent off-axis rejection
• Balanced, vibrant and natural sound right out of the box
• Frequency Response from 20Hz to 20kHz
• 1x Earthworks Audio SR117 Vocal Condenser Microphone
• 1x Microphone Bag

• Microphone Type: Condenser
• Frequenct Response: 20Hz-20KHz
• Polar Pattern: Supercardioid
• Sensitivity (1KHZ): 5 mV/Pa (-46 dBV/Pa)
• Power Requirements: 48V Phantom Power (P48), 10mA
• Peak Acoustic Input: 140 dBSPL
• Minimum Lload Impedance: 1kOhm
• Self-Noise (A-Weighted): 20 dBSPL-A
• Signal to Noise Ratio: 74 dB
• Dimension (LxD): 7" x 1.93"
• Weight: 0.85 lbs

Professional Sound Corporation has been a leader in the design and manufacture of condenser microphone power supplies. Our 12T and Universal Microphone Power Supplies are industry standards with thousands of units in use today. Their rugged, yet user friendly design has made them the most widely used power supplies on the market. With this in mind, PSC set out to design and build a new PSC 48 PHantom Microphone Supply specifically for use with the newer condenser microphones.

This new design was conceived as a simple alterative to our Universal Microphone Power Supply. Many of the new condenser microphone designs contain user switchable pads and low cut filters. Because of this, we have eliminated these functions from our new PSC 48 PHantom Microphone Supply. This supply utilizes a modern current control feedback regulator circuit to provide a constant 48 volts regardless of the current consumption of the microphone. Thus, it can power any 48PH microphone with ease and efficiency. The PSC 48 PHantom Microphone Supply operates from a single 9V alkaline battery for 10 to 30 hours. The unit is housed in a rugged, black anodized, aluminum case. A sturdy, removable belt clip is included.

• 48 Phantom Microphone Power Supply

• Output Voltage:48 +/-2Vdc
• Input Voltage:5.5 - 9Vdc
• Dimension:3.25" x 3.25" x 1.3"
• Weight:7.5 oz

The HY-WM1W from TOA Electronics is a bracket for mounting HX-5 series speakers to a wall or ceiling. It is designed for indoor use.

• Wall & Ceiling Mounting Bracket, White

• Color: White

The Lav Snake's sleek design makes it the perfect tool to move through the most constricted spaces quickly and easily. It is made of a thin, nearly unbreakable wire that is 3.5 times thinner and lighter than competing products. The polished wire is flexible enough to move through bends in clothing yet strong enough to keep its shape through years of use.

One end of the Lav Snake has a highly visible, low profile red tip that slips easily through clothing. The opposite end has a TA connector with a specially designed boot. Its smooth, curved surface prevents unwanted snags.

• Uncoiled Length: 4 ft.
• Min Diameter: 0.05 in.
• Max Diameter: 0.40 in.
• Pouch Size: 6 x 4.5 in.
• Weight: 0.04 lbs

The WM200/300TX-XLR by Comica is a UHF Metal Wireless XLR Transmitter is a metal wireless microphone XLR transmitter, which is charged by AA batteries and supports 48V phantom power output. It utilizes UHF wireless FM technology and includes a high-resolution LCD lattice screen, multiple channel selections, an integrated LCF(Low cut filter), Auto-scanning, Auto IR Channel-match, RF signal strength adjustment, MIC/LINE IN input dual selection, Power monitoring at receiver end, Sound pickup dynamic display, Backlight adjustment and other functions, at the same time with strong shielding anti-noise performance.

• Working Distance up to 200ft. (100ft. with no direct line of sight)
• Supports 48V Phantom Power
• LCF Low Cut Filtering Mode
• Auto-Scanning for Quick Channel Selection
• Manual or Auto IR Sync
• Adjustable RF Signal Strength
• Audio Dynamic Display Bar
• Full Metal Manufacturing

• Channels: 96
• Transmission Power: 10 dB & 15 dB
• Duration: 4 hours
• Stray Radiation: Lesser than 60 dB
• Audio Distortion: Lesser than 0.5%
• Signal & Noise: Lesser than 65 dB
• Frequency Response: 20 Hz - 18 KHz
• Phantom Power: 48V
• Battery: 2 x AA
• Operating Temperature: 32 to 122 deg F
• Storage Temperature: minus 4 to minus 140 deg F
• Weight: 1 lbs

• Stage Ninja Mic Mount on 12 inch, 360 Degree Solid Gooseneck and 60 lbs
• Rated Industrial Magnet
• Adheres Firmly on most Metal Surfaces
• Excellent piano mic-ing system
• Also great for Mobile Broadcasts/Podcasts, Press Conferences, Room Recordings, Movie Production, Schools, Etc.

• Weight: 1 lbs

• Standard Push-to-Talk and Lock-to-Talk Buttons
• High Quality Omni Directional Ceramic Cartridge
• 5 Conductor Shielded Standard Astatic Color Coded Cable
• 4-Pin Connector
• Rugged Cycolac Resin Housing
• Requires a Standard 9-Volt Battery (Not Included)
• For Industrial and Commercial Applications

The VHF-4000 is another entry in 's long line of quality wireless microphone systems. This quad channel microphone system is easy to set up and even easier to use; the receiver provides an output for each microphone signal for maximum mixer control as well as a mixed output for a quick setup. Add in 4 microphones that are specifically tuned to get the best out of your vocal performance and you have a microphone system that can handle any situation. The VHF-4000 is the reliable choice for those looking for a simple to use mic system without sacrificing quality.

• I - 180.50 MHz (Orange)
• J - 209.60 MHz (Blue)
• K - 174.50 MHz (Red)
• L - 200.50 MHz (Green)

• Each microphone has an independent channel volume
• Sturdy vhf microphones take two AA batteries
• Flexible output jacks with a single 1/4 in. Mixed output and 4 independent XLR outputs
• Includes one 1/4 in. Patch cable

• 4 XLR outputs
• 1/4 in. mixed output
• Power Input