
Forever Laser Dark No-Cut Low Temp Heat Transfer Paper 11 x 17 - 10 Sheets
Product information for Forever Laser Dark No-Cut Low Temp Heat Transfer Paper 11 x 17 - 10 Sheets
Print your design in mirror image onto the A-Foil then press together with the B-Paper. The B-Paper adheres only to where there is toner on the A-Foil; then press the A-Foil onto your substrate for a sharp high quality print with the softest feel of all transfer paper prints. Once you have pressed the print from your A-Foil onto your substrate the finish will be high gloss. However; the resulting print will need to be cured to seal the print into your substrate and provide the high wash durability of Laser Dark (No Cut). Finish your print with Matt/Gloss Finishing Paper or Hot Stamping Foil for a wide range of metallic colors to finish the print. Use of a White Toner Printer is recommended to achieve the best results. CMYK printers can be used; but with limitations. The OKI Pro8432WT can print up to A3XL - but cannot print A3XLW. Paper CANNOT be used with inkjet printers.





















