
GENEMA 18650 21700 Smart Charger and DIY Power Bank QC3.0 USB+Type C PD Output With Digital Display Mobile Phone Fast Charger
Product information for GENEMA 18650 21700 Smart Charger and DIY Power Bank QC3.0 USB+Type C PD Output With Digital Display Mobile Phone Fast Charger
100% brand new and high quality 1. Cylindrical battery charging function Connect the power supply insert the lithium ion battery the charger will automatically start to charge the battery. The input is compatible with multiple fast charging protocols. When the power supply is QC3.0&PD3.0 fast charging protocol the input voltage and current are 9V2A/12V1.5A and the charging current of both slots is 2A; when the power supply has no fast charging protocol the default input is 5V2A and the output current is 2Ax1 or 1Ax2. 2. USB mobile power output function Put two or one lithium-ion battery (maximum capacity up to 10Ah) when connected to an external device (mobile phone etc.) the charger will automatically charge the external device. The output is compatible with multiple fast charging protocols. When the external device does not support fast charging the default output is 5V2A. When the external device supports the fast charge protocol it will output according to the voltage and current required by the external device and the maximum power is 18W. Note: The type-C and USB interfaces can charge two external devices at the same time. When the two interfaces are output the output voltage is only 5V and a single interface output supports fast charging. 3.3.0V activation function After inserting the battery the charger will automatically detect and activate the battery. If the battery cannot be activated it is determined that the battery is damaged. At this time the charger digital tube displays 0% 00.0v 0.0A . 4. About button: ●When charging press the key to switch the display content the default display is the percentage of input voltage current and battery power. Click the button to display the charging voltage and current of the battery and the percentage of power in slot 1 (B1). Press the button again to display the percentage of charging voltage/battery current/power in slot 2 (B2). Press again to return to the input display. ● In the standby state click the button to track the power consumption. 5 A DIY power bank box without battery needs 2pcs 18650 or 21700 rechargeable battery (Not included) DIY USB Power bank for cellphones or tablet and more with Digital Display. Specifications: Material: ABS Color: Gray Green Red Size: 128x57x30mm Input port: Type C Female Output port: USB or Type C Female Type C Input: DC 5V/2A 9V/2A 12V/1.5A USB and Type C Output: DC 5V/2A 9V/2A 12V/1.5A Note: 1.Transition: 1cm=10mm=0.39inch 2.Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid. 3.Due to the difference between different monitors the picture may not reflect the actual color of the item. Thank you! Package includes: 1 X DIY 18650 21700 Power Bank (18650 battery are not included) 1 X USB charging cable





