JVCC 761 Industrial Grade Filament Strapping Tape: 3 in x 60 yds. (Natural)
Product information for JVCC 761 Industrial Grade Filament Strapping Tape: 3 in x 60 yds. (Natural)
JVCC 761 Industrial Grade Filament Strapping Tape is a fiberglass filament reinforced polypropylene film tape used for packaging bundling and palletizing. This tape is also referred to as filament tape or string tape . NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product s actual size is 72mm x 55m. This tape is typically cut to width from log rolls so most sizes ship on non-branded plain white cores. As with any adhesive tape product it is always the user s responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first. Warning: This product can expose you to chemicals including Toluene which is [are] known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/. Technical Information - Core: 3 inch diameter - Backing/Carrier: fiberglass filament reinforced polypropylene film - Adhesive: synthetic rubber - Thickness: 5.5 mils (carrier adhesive) - Adhesion: 91 ounces per inch (to stainless steel test panel) - Tensile Strength: 200 pounds per inch (longitudinal) - Service/Operating Temperature: up to 140F - Elongation: 7 %
