
Water Pump 0.75HP Portable Shallow Well Pump Draining Irrigation Pump for Lawn
Product information for Water Pump 0.75HP Portable Shallow Well Pump Draining Irrigation Pump for Lawn
If you are looking for efficient and simple irrigation methods take a look at our water pump. Made of high-quality aluminum copper silicon and stainless steel with a painting process this product provides quality assurance for your long-term use. Max 0.55kw power 3420 rpm and max.114.83ft lift make your work easier and more efficient. In addition the product comes with an automatic pressure switch and a powerful motor which can automatically suction and quickly pump water to improve your irrigation and cleaning work efficiency. It is suitable for sprinkler systems irrigation daily water delivery and drawing water from shallow wells ponds lakes rain barrels tanks and more. It can be used as a sprinkler pump well pump or booster pump and can pressurize your home for solar washing machine water heater tap water shower etc. Specifications Material: Stainless Steel Aluminum Copper Silicone Color: Black Blue Process: Painting Motor: Pure Copper Motor Assembly Required: Yes Mounting Type: Floor Standing Power Source: Corded Electric Plug Type: US Standard Insulation Grade: B IP Level: IP46 Waterproof Lever: IP46 Capacitance: 30μF Max Temperature: 75°C/167°F Voltage: 110V 60Hz Input Current: 6.0A Power: 0.55KW(0.75hp) Rotating Speed: 3420rpm Water Pump Inlet: 2.54cm/1in Water Pump Outlet: 2.54cm/1in Maximum Flow Rate: 3m³/h/792.52GPH Noise: 0-30db Maximum Lift Height: 35m/114.83ft Maximum Pressure: 3.5bar Maximum Suction: 8m/26.2ft Power Cord Length: 1m/3.28ft Gross Weight: 9kg/19.84lbs Product Size: 38*20*22cm/14.96*7.87*8.66in Package Size: 46*30*26cm/18.11*11.81*10.24in Package Included 1*Water Pump 1*Multilingual Manual 1*Sealing Tape 1*Pressure Gauge 1*Pressure Switch All Accessories for Assembly Notes Adding water to the pump head until it is full helps to speed up the inlet flow rate. The inlet pipe(not included) shall not be excessively bent and the end pipe (not included)shall be completely submerged. Please note that it is only suitable for clean water. Please read the operating manual completely before use and pay particular attention to the safety instructions included. Please discharge the waste water if not used frequently and please do not run the pump without water. Please do not wet the motor before first use and fill the pump head with water to wet the impeller. Please perform a water test after the installation is complete to check for leaks and other conditions. Please make sure that the air inlet joint or pipe is completely sealed and air-tight and that hose used for the water inlet pipe is not sucked and deflated. Check the coupling to see if the internal drive is damaged. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement and make sure you do not mind before you order.




