Powermatic 14" Table Saw with ArmorGlide - 50" Rip Extension Table - 7-1/2 HP 3 PH 230/460V - PM3000T

JessEm Clear-Cut TS Stock Guides for Table Saws are the ultimate hold-down on the table saw. Multiple featherboards are required to simultaneously hold down and guide material accurately against a table saw fence. Clear-Cut TS Stock Guides operate on the same principle as a stock feeder in that the stock is guided at a slight angle as it is fed forward. Urethane tires on rollers with one-way needle bearings are mounted at an angle to effectively steer your stock toward the fence. Stock is pushed tightly against the fence, and the gripping force of the rollers assists in preventing kickback. All the while the roller arms work under spring pressure to ensure your material is held firmly against the table saw surface. Features: Unique roller system holds down workpiece and pushes into fence for precision stock feed Rollers are fitted with one way roller bearings to ensure each roller spins in the direction of the feed to prevent kickback. Set up is fast and easy Quick and easy adjustments for thicker/thinner and longer/shorter stock When not in use they tuck away in behind the surface of your fence. Compatible with most T-Style commercial fences using the included HD T-Track Specifications: Guides have 3-1/8" of total vertical travel and can be positioned anywhere along HD T-Track Maximum stock thickness from table saw surface to 13/16" above mounting surface when mounted to the T-Track What's Included: (2) Adjustable Roller Arm Stock Guide Assemblies (1) 30" Fence mounted heavy duty T-Track (1) Mounting hardware (includes: #10 Self Tapping Screws,1/4-20 x 1/2" Low Head Cap Screws, 1/4-20 Square Nuts, T-25 Torx Screwdriver,1/8" Hex Key and#19 Drill Bit (1) Detailed instructions FAQs Why should I use a stock guide with my table saw? A stock guide improves safety and accuracy by keeping your wood firmly against the fence during cuts, reducing kickback and ensuring straighter, cleaner rip cuts. It also helps maintain consistent pressure for repeatable results. Will this stock guide work with any table saw? The JessEm Clear-Cut Precision Stock Guides fit most table saws with standard T-slots or miter slots. Always check compatibility with your saw's fence system and slot dimensions before purchasing.

10" Table Saw - 3 HP 1 PH 230V 30" RIP, ArmorGlide Model PM2000T, now featuring ArmorGlide Technology that is low-friction and rust-resistant, the award-winning PM2000B table saw sets a new standard for innovation with an array of patented features and massive body design. The ArmorGlide coated cast iron tables are oversized, and the newly designed arbor lock lever is accessible from above the table top to eliminate the need for dual arbor wrenches. The quick-release riving knife design helps reduce the chance of kickback. The blade tilt scale features an integrated digital readout as well as adjustable angle indicators for repetitive bevel cuts. The newly designed integrated retractable hydraulic caster system lifts your table saw much higher than the previous model to assist when moving over thresholds. A wide stance, heavy-duty box trunnion and concave teeth on the trunnion gears promote easier raising and tilting of saw blade. Poly-V drive belt system results in quieter, more efficient power transfer from the motor to the arbor with virtually no vibration and less heat build-up. Improved built-in dust collection port with convenient access to the inside of the saw cabinet for simple clean-up. The saw has a proprietary safety switch with magnetic interlock and the stop button can be knee activated. Features: ArmorGlide Technology gives you a low-friction, industrial-grade coating on the work surface that is rust resistant Requires less maintenance Gives you more control. Miter gauge is built with robust materials with many positive stops for the most commonly used angles. Adjustable angle indicators on the blade bevel scale for repeatable bevel cuts Arbor lock for quick and easy blade changes Integrated digital read out for precise bevel cuts Integrated dust collection Integrated hydraulic castor system for ease of movement around the shop Matching beveled edge between table and extension wings One-piece cast iron box trunnion provides the strongest stability of any Powermatic table saw Precision-ground, high luster cast iron tabletops with front and rear edge bevel Quick release riving knife lever for hassle free riving knife changes Motor: 3 HP Motor Power: 230V Motor Phase: 1 PH single phase Amps: 4.9 Arbor Diameter: 5/8" Arbor Speed: 4500 RPM Blade Diameter: 10" Dust Collection Minimum: 400 CFM Dust Port O.D.: 4" Maximum Depth of Cut at 45 Degree: 2-1/8" Maximum Depth of Cut: 2-1/8 or 3-1/8" Maximum Diameter of Dado: 8" Maximum Rip Left of Blade:13-1/2" Maximum Rip Right of Blade: 30" Maximum Width of Dado: 13/16 T-Slot with Stops Table Type: Cast Iron 30" Accu-Fence System Net Weight: 644 lbs. Ship Weight: 719 lbs. Overall Dimensions: Shipping 84-3/4"L x 39-1/8"W x 40-3/8" H Table Height from Floor: 34-1/4" Table in Front of Saw Blade at Maximum Depth of Cut: 10" Table Size: 30-1/2" L x 22" W Recommended Circuit Size: 20 Amp What's Included: (1)Powermatic - 10" Table Saw with ArmorGlide - 30" Rip Accu-Fence System - 3 HP 1 PH 230V - PM2000T