WoodRiver Multi-Track Flip-Stop 3X

EHOMAT-Track Clamps are a versatile addition to any shop. Use them with your shop made jigs and fixtures, your drill press table, clamping table or any work surface containing WoodRiver T-Track extrusions or any other standard 1/4" T-Track. Screw handle operation works well as a quick hold-down for a multitude of tasks. Use this clamp with most common track saw tracks. The non-marring clamp pad will secure your project to the table without damage. Clamp will accommodate an 8-1/2"-thick workpiece and has a 2-3/8" throat. Fits most 1/4" T-Track extrusions, including the WoodRiver design with deep well profile. Features: Ideal for use with shop made jigs and fixtures that utilize standard 1/4" T-Track Non-marring pad Plastic handle with molded rubber grip Specifications: Capacity in T-Track: 8-1/2" Throat Depth: 2-3/8" What's Included: (1) EHOMA 7.5" Track Clamp with Screw Handle

Use this versatile WoodRiver extruded aluminum Multi-Track to configure and build your own fence for miter saws, routers, table saws and miter gauges. Each side of the track has T-Slots that allow you to combine tracks to build jigs and fixtures with optional hold-downs and fence stops. This track is designed for use with standard 1/4" -20 T-Nuts to allow for a clean assembly without the need for drilling. Features: Use to configure and build your own fence for miter saws, routers, table saws and miter gauges Tracks may be combined to build jigs & fixtures to meet your woodworking needs Each side accepts 1/4" -20 T-Nuts allowing for a clean assembly without the need for drilling Specifications: Length: 36" Width: 3" Height: 3/4" Construction:Durable extruded aluminum What's Included: (1) WoodRiver - Multi-Track - 4X - 36"

The function of the tool setting instrument The measurement and compensation of the tool offset value in five directions can effectively the error...

Faster shipping. Better service

WoodRiver® Brass Knurled Thumb Nut Knobs can be used when space is a concern and finger tightening is adequate for light-duty clamping. 3/4"-diameter, 7/16"-high thumb nuts fit easily in confined spaces. Vertical splines around the rim of the nut makes it easier to tighten by hand. 5/16" - 18 coarse thread; four pieces per package.

WoodRiver Small Basic T-Track Hold-Down slides into your WoodRiver Standard T-Track, Back-to-Back T-Track and Miter Track to hold workpieces securely in position. Great hold-down for your jigs and fixtures made with WoodRiver T-Track and Miter Track. Features: Fits WoodRiver Standard T-Track, Back-to-Back T-Track and Miter Track Aluminum body with rubber grips will not mar workpiece 2-1/2" long x 1/4" -20 T-bolt will hold up to 2" thick material T-Track available separately Specifications: Dimensions - Aluminum Body: 4-1/4" x 1" Materials: Aluminum body with rubber grips Capacity: Will hold up to 2" thick material T-Track Compatibility: 1/4" What's Included: (1) T-Track Hold Down - Small (1) T-bolt (1) Miter Track Mount (1) Washer (1) T-Shaped Knob

WoodRiver Standard 1/4" T-Track holds 1/4"-20 bolt heads and nuts so you can build clamping tables, drill press tables - even router table fences. The durability of extruded anodized aluminum construction adds life to your favorite jigs and fixtures. T-Track is pre-drilled for included mounting screws. Nominal 1/2"-tall profile accommodates either dado or laminated installation. Features: Allows the use of 1/4"-20 nuts and bolts Durable extruded aluminum construction Pre-drilled for using included screw hardware Nominal 1/2" profile height fits dadoes or laminated fixtures Specifications: Length: 24" Profile (width): 3/4" What's Included: (1) WoodRiverStandard 1/4" T-Track - 24" Length

Heavy-duty and easy to grasp, this WoodRiver TPR Grip Knob can be assembled as a stud knob with a bolt or a through-hole knob, using a nut to make it the perfect knob for whatever may be the application. Tapered 1/2" hex opening above the 5/16" through hole holds your nut or bolt tightly, and the large diameter boss eliminates the need to use a washer. 4-pack includes four 5/16" TPR Grip Knobs; no hardware is included. Features: Instant stud knob of whatever length you need using your 5/16" bolt Instant through-hole knob using your 5/16" hex nut Tapered 1/2" hex opening above 5/16" through hole holds your nut or bolt tightly TPR material provides exceptional grip, large diameter boss eliminates need for washer What's Included: (4) WoodRiver TPR Grip Knobs - 5/16" Product Notes: Hardware not included

Heavy-duty and easy to grasp, this WoodRiver TPR Grip Knob can be assembled as a stud knob with a bolt or a through-hole knob, using a nut to make it the perfect knob for whatever may be the application. Tapered 7/16" hex opening above the 1/4" through hole holds your nut or bolt tightly, and the large diameter boss eliminates the need to use a washer. 4-pack includes four 1/4" TPR Grip Knobs; no hardware is included. Features: Instant stud knob of whatever length you need using your 1/4" bolt Tapered 7/16" hex opening above 1/4" through hole holds your nut or bolt tightly TPR material provides exceptional grip, large diameter boss eliminates need for washer What's Included: (4)TPR Grip Knobs - 1/4" Product Notes: Hardware not included.

The WoodRiver T-Track Hold-Down - Large provides strong, reliable clamping pressure for securing workpieces during routing, sanding, drilling, and general jig use. Designed to fit most standard T-track systems, this hold-down offers adjustable tension and a wide clamping range, making it ideal for larger or thicker materials. Built with durable components and an easy-to-adjust knob, it ensures fast setup and steady pressure to keep your workpiece safely in place. Whether you're assembling custom fixtures or upgrading your existing jigs, this hold-down adds essential control and stability to your shop operations. Features: Fits WoodRiver Standard T-Track, Back-to-Back T-Track and Miter Track Aluminum body with rubber grips won't mar workpiece 3-1/2" long x 5/16" -18 T-bolt will hold up to 3" thick material T-Track available separately Specifications: Dimensions - Aluminum Body: 5-1/4" x 1" Materials: Aluminum body with rubber grips Capacity: Will hold up to 3" thick material T-Track Compatibility: 1/4" What's Included: (1) T-Track Hold-Down - Large (1) T-bolt (1) Miter Track Mount (1) Washer (1)5-Star Knob

WoodRiver QuiKnob Jig Knob is a common 5-star knob with the added bonus of a spring-loaded threaded interface that can easily be activated to quickly advance the knob into a tightening position. Use with hold-downs, fence anchors, position stops, and most jig and fixture applications. Includes two QuiKnobs, two 3" long 5/16" x 18 TPI T-Bolts and two compatible washers. T-Bolts are compatible with all WoodRiver T-Track. Features: 5-star knob with unique spring-loaded threaded interface Quickly advance knob into tightening position Use with hold-downs, fence anchors and position stops T-Bolts are compatible with all WoodRiver T-Track What's Included: (2) WoodRiver QuiKnobs (2) 3" long 5/16" x 18 TPI T-Bolts

Combine Multi-Track Extrusions with this 2-piece WoodRiver Bracket Set to configure and build your own shop fixtures and fence assemblies. This versatile Bracket includes 1/4" -20 T-Nuts with cap screws that allow you to combine Multi-Track Aluminum Extrusions without the need for drilling. Features: Use brackets to configure and build your own shop fixtures and fence assemblies 1/4" -20 T-Nuts with cap screws allow you to combine Multi-Track Aluminum Extrusions without the need for drilling Specifications: Construction: aluminum Product Dimensions: 1-1/4" x 2" What's Included: (2)WoodRiver - Multi-Track Brackets for 3X Multi-Track Aluminum Extrusions (2) Sets of 1/4-20 T-Nuts (1 set for each bracket) (2) Sets of Cap Screws (1 set for each bracket) (1) 3/16" Hex Wrench Notes: Multi-track extrusions sold separately.

Use these WoodRiver guides to configure an adjustable fence that joins perpendicular T-tracks. Each guide is made of extruded aluminum and is supplied with 1/4" -20 TPI hardware to interface with standard T-track. Features: Works with standard 1/4" T-track extrusions Made of extruded aluminum What's Included: (2) T-Track Fence Guides

Build smarter, more versatile woodworking jigs with the WoodRiver Standard 1/4" T-Track in a convenient 36" length. Designed to bring precision and flexibility to your shop-made fixtures, this durable aluminum track accepts standard 1/4" T-bolts and compatible hardware for smooth, secure adjustment. Ideal for router table fences, drill press setups, crosscut sleds, stops, clamps, and countless workholding applications, this T-track installs easily and provides long-lasting reliability. Whether you're enhancing your workflow or assembling custom jigs, this 36" T-track delivers strength, accuracy, and dependable performance. Features: Allows the use of 1/4"-20 nuts and bolts Durable extruded aluminum construction Pre-drilled for using included screw hardware Nominal 1/2" profile height fits dadoes or laminated fixtures Specifications: Length: 36" Profile (width): 3/4" What's Included: (1) WoodRiverStandard 1/4" T-Track - 36" Length

Build accurate, dependable, and smoothly guided jigs with the WoodRiver Standard 3/4" Miter Track in a 32" length. Designed to fit most standard miter bars and accessories, this aluminum track makes it easy to create custom sleds, guides, stops, and other precise fixtures for your table saw, router table, or drill press. The durable construction ensures long-lasting reliability, while the smooth interior walls allow miter gauges and runners to glide effortlessly. Whether you're improving accuracy, expanding your jig collection, or building specialized fixtures, this miter track provides the precision and stability your shop projects demand. Features: 3/4" x 3/8" miter track has a bottom T-profile Nominal 1/2" profile height fits dadoes or laminated jigs Durable construction Pre-drilled for using included screw hardware Specifications: Length: 32" Profile Height: .515" Profile Width: 1.205" Material: Extruded aluminum What's Included: (1) WoodRiver Standard 3/4" Miter Track - 32" Length

Combine Multi-Track Extrusions with this 2-piece WoodRiver Bracket Set to configure and build your own shop fixtures and fence assemblies. This versatile Bracket includes 1/4" -20 T-Nuts with cap screws that allow you to combine Multi-Track Aluminum Extrusions without the need for drilling. Features: Use brackets to configure and build your own shop fixtures and fence assemblies 1/4" -20 T-Nuts with cap screws allow you to combine Multi-Track Aluminum Extrusions without the need for drilling Specifications: Construction: aluminum Product Dimensions: 2" x 2" What's Included: (2)WoodRiver - Multi-Track Brackets for 4X Multi-Track Aluminum Extrusions (2) Sets of 1/4-20 T-Nuts (1 set for each bracket) (2) Sets of Cap Screws (1 set for each bracket) (1) 3/16" Hex Wrench Notes: Extrusions sold separately

WoodRiver® Fence Adapter T-Track is the easiest way to make fence faces for your miter gauge, router table or drill press. L-shaped profile contains two 1/4" T-Track profiles that mount to the back of nominal 3/4"/18mm plywood or MDF frame material. Front opening T-Track rests on top edge of your fence face material to hold 1/4" bolt heads and nuts to attach stops, featherboards and other accessories. Shallow top opening T-Track can be used to hold 1/4" T-Bolts for stops and guides. Durable extruded aluminum construction with V-groove on the rear of the track to help align holes that you drill for mounting.Features:• 24" long x 1-5/16" wide x 1-3/4" tall• Front T-Track rests on top edge to hold 1/4" bolt heads and nuts• Top opening T-Track can be used to hold 1/4" T-Bolts• Shallow recess on top to attach 1/2" measuring tape• Nominal 3/4"/18mm profile corner fits plywood and MDF material

Use this versatile WoodRiver extruded aluminum Multi-Track to configure and build your own fence for miter saws, routers, table saws and miter gauges. Each side of the track has T-Slots that allow you to combine tracks to build jigs and fixtures with optional hold-downs and fence stops. This track is designed for use with standard 1/4" -20 T-Nuts to allow for a clean assembly without the need for drilling. Features: Use to configure and build your own fence for miter saws, routers, table saws and miter gauges Tracks may be combined to build jigs & fixtures to meet your woodworking needs Each side accepts 1/4" -20 T-Nuts allowing for a clean assembly without the need for drilling Specifications: Length: 24" Width: 2-1/4" Height: 3/4" Construction:Durable extruded aluminum What's Included: (1) WoodRiver - Multi-Track - 3X - 24"

Use this versatile WoodRiver extruded aluminum Multi-Track to configure and build your own fence for miter saws, routers, table saws and miter gauges. Each side of the track has T-Slots that allow you to combine tracks to build jigs and fixtures with optional hold-downs and fence stops. This track is designed for use with standard 1/4" -20 T-Nuts to allow for a clean assembly without the need for drilling. Features: Use to configure and build your own fence for miter saws, routers, table saws and miter gauges Tracks may be combined to build jigs & fixtures to meet your woodworking needs Each side accepts 1/4" -20 T-Nuts allowing for a clean assembly without the need for drilling Specifications: Length: 24" Width: 3" Height: 3/4" Construction:Durable extruded aluminum What's Included: (1) WoodRiver - Multi-Track - 4X - 24"

Use this versatile WoodRiver extruded aluminum Multi-Track to configure and build your own fence for miter saws, routers, table saws and miter gauges. Each side of the track has T-Slots that allow you to combine tracks to build jigs and fixtures with optional hold-downs and fence stops. This track is designed for use with standard 1/4" -20 T-Nuts to allow for a clean assembly without the need for drilling. Features: Use to configure and build your own fence for miter saws, routers, table saws and miter gauges Tracks may be combined to build jigs & fixtures to meet your woodworking needs Each side accepts 1/4" -20 T-Nuts allowing for a clean assembly without the need for drilling Specifications: Length: 48" Width: 2-1/4" Height: 3/4" Construction:Durable extruded aluminum What's Included: (1) WoodRiver - Multi-Track - 3X - 48"

Automatic self-centering action of this WoodRiver Wide Capacity Deluxe Doweling Jig assures accurate center drilling every time. Steel clamping screw has fine threads to increase clamping force across even narrow material. Aluminum frame holds work securely without damage to the workpiece. Drill guide block is hardened, precision drilled and marked for hole centers. Extra capacity up to 6" wide is perfect for face work on 2 x 4 and 2 x 6 stock. Even opens to center drill large table legs and bedposts. Deluxe doweling jig features two permanent drill hole sizes: 7/16" and 1/2" and two threaded drill holes that accept any of the six removable screw-in bushings. Removable bushing sizes are two each of 1/4", 5/16" and 3/8". Features: Self-centering hardened drill guide block with steel clamping screw Hole center marked on jig to align directly with location mark on the workpiece 6" wide capacity with aluminum frame holds work securely Two permanent drill hole sizes 7/16" and 1/2" and two threaded drill holes Removable bushing sizes are two each of 1/4", 5/16" and 3/8" Specifications: Capacity (Width): 6" What's Included: (1) WoodRiver Wide Capacity Deluxe Doweling Jig (2) 1/4" removable bushings (2) 5/16" removable bushings (2) 3/8" removable bushings