Feit Electric 3010211 100 watt Led OneSync Bronze Solar Powered & Remote Spotlight - All

• Material - solid brass.
• Finish - antique bronze (BZ).
• Lens - clear tempered glass, with silicon rubber gasket.
• Hood - solid brass with set screw.
• Mounting - 1/2 in. NPT threads, non-metallic mounting spike included.
• Voltage - 12V AC.
• Lamp - 20 watt MR-16 (GU-5.3 bi-pin base) included.
• Maximum wattage - 35 watts.
• Lamp Life - 2,000 hours average.
• Lumens - 320 (2800K).
• Lamp - PAR 36.

• Die-cast aluminum construction for long-lasting durability and corrosion resistance.
• Tool free aiming and lamp replacement.
• LED lamp option can reduce installed costs by reducing the size of the transformer and wire gauge size.

Pistol Grip LED Spotlight 800' Beam 16' Coil Cord with Cigarette Plug 10 Watts Magnetic Base. Buy American Compliant The HL 85 10W1 M LED Pistol Grip Spotlight is an extremely rugged and effective spotlight designed to give users a powerful, durable and easy to use source of reliable light. This spotlight produces 800 lumens and a light beam approximately 800’ long by 175’ wide. This pistol grip spotlight comes with a detachable 16 foot coil cord with cigarette plug and a patented 10 Watt LED reflector assembly packaged in a machined aluminum head mounted on a 100lb grip, 3" diameter magnetic base. Our light weight, 10 watt LED spotlight is ergonomically designed to produce a well balanced and easily managed handheld light source that can withstand abuse under tactical conditions with a handle constructed of high impact nylon, and an LED fully potted within a lamp assembly constructed of machined aluminum. This lamp and the materials it is constructed from are water, UV ray, impact and vibration resistant and designed to be easily field serviceable. This unit requires no tools to remove any components and the internal connectors are accessed through a snap in base at the bottom of the handle. We have fitted with light with an included 100 lbs grip magnetic base that allows users to securely mount this unit to ferrous metallic surfaces for maximum convenience and ease of operation. Tension hinges included with the magnetic base allow users to set the light position angle and it will hold this positioning until the user changes it. Durability Convenience: The HL 85 10W1 M Pistol Grip LED Spotlight contains a single LED that is fully potted within a machined aluminum lamp housing and protected by a thick Lexan lens. This LED has an expected life span of 50,000+ hours and the entire LED lamp housing can be removed and replaced. This light is constructed of UV, water and impact resistant materials including a handle

• 10 watt Pistol Grip LED Spotlight with Magnetic Base
• 800 ft. Beam
• 16 ft. Coil Cord with Cigarette Plug

• Dimension: 9" H x 9" W x 9" L

The Tools 26200B-221 LED Dual Gooseneck Spotlight Illuminator features two 23 3/8 in. long dual goosenecks, providing users the ability to inspect at any angle and at any working distance, wherever needed. Each flexible gooseneck arm can be swiveled and bent to the desired position, and stays in place. Use both LED illuminators-or one-and control the light intensity of each illuminator as desired. The weighted base keeps the unit stable, while the 6500K white lights provide shadow-free illumination.

• Ideal external light source for high-magnification inspection systems
• Produces bright, shadow-free illumination
• 23 3/8 in. dual gooseneck lights can be swiveled and bent to desired position
• Provides lighting at any angle and in difficult to reach areas
• Equipped with brightness intensity control knobs for each light
• Weighted base keeps unit stable
• Gooseneck Arm Reach: 22 3/8 in.

• Color Temperature: 6500K cool light
• Power Supply: 85-265VAC/50-60Hz

Versatile & durable combination UV and white beam inspection light designed for a wide range of industrial applications. Featuring a powerful UV light that is perfect for detecting leaks, cracks, and defects, as well as a white beam light for general inspection purposes, this light is a must-have for any professional technician or engineer.

• UV Light: 395nm, 630mW 5 minutes (one cycle)
• Floodlight: (High) 800lm/2hr30min; (Low) 150lm/8hr
• Powerful integrated magnets add versatility
• Easy-to-use USB-C charger connection (cable included)
• Durable high impact plastic and aluminum contruction
• LED charge indicators

• Charging time: 4 Hour
• Spotlight: 150 lm/8hr
• Weight: 25 lbs

60 Watt LED Low Profile Wall Pack Light With Glare Shield and 100' Cord U Bracket Mount Wall Plug. The LEDWP 600E 100C LED Wall Pack Light offers high light output from a compact form factor and is designed to provide a more durable and long lived alternative to halogen and metal halide units. This 60 watt LED light produces a wide flood beam without the high heat, fragile construction, or high energy costs of incandescent lighting. The LEDWP 600E 100C LED wall pack light from Larson Electronics produces a long flood beam of light while drawing only 0.5 amps at 120 VAC. The light assembly consists of forty five LEDs paired with high purity specular optics to produce a wide light distribution overpowering that of a 500 watt quartz flood lights. This light is constructed of three angled boards that helps provide a wider spread. Instead of the light only shining forward, the center board is concentrated to go straight out while the boards on the side are 45° offset. This LED wall pack is designed to withstand demanding conditions and is waterproof, vapor proof, and built to resist the damaging effects of an outdoor environment. The LEDWP 600E 100C consists of forty five LEDs housed within a waterproof aluminum housing that is powder coated for added durability and resistance to corrosion. The housing incorporates integral cooling fins for efficient heat dissipation and increased LED longevity. The LED lamp assembly is protected by a shatterproof polycarbonate lens which is secured to the housing with a waterproof seal. A 1/2" waterproof connector provides a secure and sealed power connection point and rounds out this unit's weather resistant construction. This fixture is powered with a 100' cord terminated with a 5 15 industrial grade wall plug.

• 60 watt LED Low Profile Wall Pack Light with Glare Shield & 100 ft. Cord
• U Bracket Mount

• Dimension: 16" H x 14" W x 8" L

ADJ’s Vision Series video panels offer the highest quality LED binning and bright, clear output. All models are front and rear serviceable. Each model has 4 individual mini modules for quick and easy servicing. All models are built on the same frame allowing panels with different resolutions to be used together. The Vision Series panels use the same rigging bar and all fit into the same road case. All models have moveable corner protects that safe guard the corners while they are not connected. There are magnets on the top and bottom of the panels that allow users to temporary connect two panels together, let go of the panels, then securely latch them on the rear. This allows for a single user to install a full wall of panels.

The VS2 is a high-resolution video panel with a pixel pitch of 2.97mm with a configuration of a 3-in-1 RGB SMD2121 LED, and a brightness of 1000 NITS. There are 4 LED modules per panel. This allows for easy serviceability. The VS2 connections include PowerLock In/Out and DataLock In/Out. Each panel features the Novastar A5s receiving card built-in. Up to 8 VS2 video panels fit inside the VSFC8 flight case. Hang up to 20 VS Series Video Panels vertically with the VSRB1 rigging bar.

• Corner Protectors to protect the corners of the VS2 during transport, set-up and teardown
• Front and rear serviceable: 4 easy to replace video modules on each panel
• Magnets on top/bottom to temporarily connect panels before latching together allowing a single user to install an entire wall

• Pixel Pitch: 2.97mm (0.12")
• LED Configuration: 3-in-1 SMD2121 LED
• Pixel Density: 168x168; 112896 per square meter
• Size : 19.68" x 19.68" x 2.74" / 500 x 500 x 69.6mm
• Weight: 17 lbs

The FOCUS WASH 400 is a 400W moving head wash fixture powered by a 400W RGBALC Red, Green, Blue, Amber, Cyan and Lime) LED engine. A 6-inch Fresnel lens with 10 to 41 degree motorized zoom produces an even field light output.

Ideal for live broadcasting and film use, this fixture has flicker free operation, adjustable refresh rates from 900Hz to 25kHz, a quiet fan mode, linear white color temperature control from 2700K - 6500K, as well as, preset white color macros (2700K, 3200K, 4000K, 5600K and 6500K). In addition to it’s tunable white feature, the Focus Wash 400 has a virtual CMY color mixing channel which allows users to choose any hue on a color picker.

The FOCUS WASH 400’s unique color engine produces a high CRI of 90+ for bright whites and a CRI R9 of 88 to help make red tones more vibrant. The fixture also includes, 16-bit pan / tilt movement, RGBACL color mixing LED engine, variable dimming modes / curves and strobe effects, DMX and RDM (remote device management) protocol support.

The fixture comes standard with locking power In/Out connections, locking 3-pin & 5-pin DMX In/Out sockets, color LCD menu display with 6 button control panel, multiple unit power linking, a multi-voltage universal auto switching power supply (AC100-240V), USB port to conveniently update firmware, and omega brackets with two hanging points.

• Watts: 400W
• Length: 10.96" (278.43mm)
• Width: 8.4" (213.33mm)
• Vertical Height: (Without Snoot)19.6" (498.1mm)
• Vertical Height (With Snoot) 22.37" (568.1mm)
• Multi-voltage: AC 100-240V / 47/63Hz
• Weight: 35 lbs

• Powder Coated Cast Aluminium Spot Light
• Clear, Convex, Heat Resistant, Tempered Glass Lens
• 12V 2-Pin LED 3W 27K Hood

• Finish: Verde Green
• Material: Cast Aluminium
• Color Temperature: 2700k
• Depth: 4"
• Height: 6.5"
• Min Height: 4.60"
• Overall Height: 6.50"
• Voltage: 12V
• Wattage: 3W
• Width: 2.90"

• Powder Coated Cast Aluminium Spot Light
• Clear, Heat Resistant, Tempered Glass Lens
• 12V 2-Pin LED 7W 65K

• Finish: Patina Green
• Material: Cast Aluminium
• Color Temperature: 6500k
• Depth: 4.50"
• Height: 7"
• Min Height: 5.75"
• Overall Height: 7"
• Voltage: 12V
• Wattage: 5W
• Width: 3.45"