Top Isotonix Deals & Price Drops for January 2026

The ProLine Series 1/4-Turn Dual Outlet Valve is designed for allowing flow control to common residential and commercial appliances. Build of chrome-plated brass, this angle valve is designed for water inlet lines coming from the wall and running up to the appliance and allows for shutoff when maintenance or new installation is needed to the appliance. This dual outlet design is ideal for when there are two appliances near the supply valve. WARNING: This product contains Lead which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov. - Lead

9/16" x 24" x 1/2" F.I.P.S. Fits 3/8" fine thread flare nut. Import. Other gas cocks are shown with flared brass tube fittings. WARNING: This product contains Lead which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov. - Lead

Diaphragm Seal Kit, Sub-Category Hardware and Gaskets, For Use With Coyne and Delaney 4.5 Closet, Fits Brand Coyne and Delaney, Material Rubber and Nylon, Includes Rubber Diaphragm and Auxilliary Valve Seat

Iron pipe inlet x compression outlet x compression outlet, 3-way angle stop valve, chrome plated brass. Used to connect water supply to faucets, toilets, and other appliances. WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov. - Lead

THIS REPLACEMENT SOLENOID VALVE KIT WILL WORK WITH THE GLOBAL INDUSTRIAL REFRIGERATED DRINKING FOUNTAIN WITH BOTTLE FILLER MODEL 761218.

PVC Schedule 80 ball valve used for cold water pressure distribution systems in residential, commercial, agricultural, and light industrial applications. This NSF-approved valve is constructed from durable PVC material. Ideal for applications where space and weight are critical considerations. WARNING: This product contains Acrylonitrile which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov. - Diisononyl phthalate DINP

Straight plated supply stop. Manufactured drom carefully sourced brass, raw materials, and components from high-quality suppliers to ensure lasting performance and reliability. Every valve is pressure-tested before it leaves the plant, and all are backed by a lifetime transferable warranty. WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Subplate, For Use With Mfr. No. VFR3000, VFS3000 Series Non Plug-in Valves, Number of Valve Stations 1, Valve Port Size 3/8 in, Solenoid Valve Manifold, VFR and VFS Series, Length In. 3 7/8 in, Width In. 2 in, Height In. 1 1/8 in, Includes Not Applicable

Angle valve with 5 In. sweat extension tube 1/2 In. Nominal sweat x 3/8 In. OD outside diameter compression with bell escutcheon. Chrome finish.

Master Lock® Rotating Gate Valve Lockouts An outward/inward rotational design surrounds the valve-operating handle to protect against accidental opening.\\nFeatures\\n - Made of dielectric Zenex™ thermoplastic\\n - Rotates into itself, nesting into the next larger size\\n - Removable center knockout for rising stem gate valves\\n - Perform effectively in extreme conditions -50°F to 350°F \\n - Includes hi-vis permanent safety labels English, French, & Spanish \\n - Red\\n - 1/Each\\n\\r\\n\\r\\n Model Number: 481|UOM: EA

Designed for commercial and residential irrigation, garden, lawn and other outdoor needs, the Garden Valve by ProLine Series is a quality choice for your outdoor needs. With an easy to operate multi-turn handle and a base made to install to a vertical water supply, this valve connects to all standard hoses. This valve is built from brass to endure in exposed locations while still providing functional operation over a long period of time. WARNING: This product contains Lead which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Dual outlet, dual shut-Off valve. 1/2 In. nominal 5/8 In. O.D. compression inlet x 3/8 In. O.D. compression outlet. Rough brass finish. Manufactured to include no more than 0.25% weighted average lead content on wetted surfaces.

Manual Two-Way Ball Valve, Body Material PVC, For Media Water, Valve Construction One-Piece, Nominal Valve Size 1/4 in, Valve Body Style Straight, 3-A Standard Compliance Not Rated, Average Surface Roughness Ra Not Applicable, Maximum Pressure - Operating 150 psi, Maximum Pressure - Steam Not Rated, Maximum Pressure - Combustible Gas Not Rated, Ball Material PVC, Ball Port Style Full Port, Handle Type Lever, Connection Size - Side 1 1/4 in, Valve Ways 2-Way, Seal Material EPDM

Safety Valve, Soft Seat, M NPT Inlet In. 1/2 in, Preset Setting PSI 200 psi, 786 cfm Rated CFM @ Set Pressure, Max. Temp. F 400 Degrees F, Brass Body Material, Silicone Seal, 17-7 SS Spring, Brass Seat, Standards ASME Boiler and Pressure Vessel Code Section VIII Division 1, CRN, ISO 9001, Air, Gas This product contains a chemical that is regulated under California Proposition 65. Warning: This product contains a chemical known to the State of California to cause cancer. Warning: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm.

Manual Two-Way Ball Valve, Body Material 316 Stainless Steel, For Media Air, Corrosive Chemicals, Non-Potable Water, Valve Construction Three-Piece, Nominal Valve Size 1/2 in, Valve Body Style Straight, 3-A Standard Compliance Not Rated, Average Surface Roughness Ra Not Applicable, Maximum Pressure - Operating 1,000 psi, Maximum Pressure - Steam Not Rated, Maximum Pressure - Combustible Gas Not Rated, Vacuum Service Rating 29 in Hg, Ball Material 316 Stainless Steel, Ball Port Style Full Port

Manual Two-Way Ball Valve, Body Material Brass, For Media Combustible Gases, Steam, Water, Valve Construction Two-Piece, Nominal Valve Size 1 1/4 in, Valve Body Style Straight, 3-A Standard Compliance Not Rated, Average Surface Roughness Ra Not Applicable, Maximum Pressure - Operating 600 psi, Maximum Pressure - Steam 600 psi, Maximum Pressure - Combustible Gas Not Rated, Vacuum Service Rating -29.92 in Hg, Ball Material 304 Stainless Steel, Ball Port Style Full Port WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov. - Lead

The NIBCO Press System ball valve body is manufactured from lead free* Brass alloy and is dezincification resistant DZR . The ball valve is designed with press-to-connect end connections with an inboard bead and EPDM O-ring for quick and easy copper to copper joinery. Properly applying pressure from a press-fit tool tightens the O-ring onto the tube, ensuring a clean, permanent, watertight seal in seconds, with no flame, solder or flux. WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Complete your bath design with the CC482 straight offset bath supply from Kingston Brass. The bath supplies are constructed from high quality brass for strong durability and reliability for years to come. The supplies are sold in pairs featuring 1/2 thickness and 29 length with a 2-1/8 diameter on the flange. Part of the Vintage Collection WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Test Ball Plug, Air Connection Gender Male, Air Connection Size Not Applicable, Air Connection Type Tire Valve, Body Surface Style Textured, Bypass Connection Size Not Applicable, Bypass Connection Type Not Applicable, Bypass Thread Gender Not Applicable, Deflated Diameter 1.1 in, Deflated Length 5.5 in, For Maximum Pipe Inside Diameter 1.75 in, For Maximum Pipe Size 1 1/2 in, For Minimum Pipe Inside Diameter 1.17 in, For Minimum Pipe Size 1 1/4 in, Head Tether Connection Ring and Chain

Manual Two-Way Ball Valve, Body Material Carbon Steel, For Media Combustible Gases, Water, Valve Construction One-Piece, Nominal Valve Size 1 1/2 in, Valve Body Style Straight, 3-A Standard Compliance Not Rated, Average Surface Roughness Ra Not Applicable, Maximum Pressure - Operating 1,500 psi, Maximum Pressure - Steam 1,500 psi, Maximum Pressure - Combustible Gas Not Rated, Vacuum Service Rating Not Applicable, Ball Material 316 Stainless Steel, Ball Port Style Standard Port WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov - Nickel Metallic

Manual Two-Way Ball Valve, Body Material 304 Stainless Steel, For Media Water, Valve Construction One-Piece, Nominal Valve Size 1 in, Valve Body Style Straight, 3-A Standard Compliance Not Rated, Average Surface Roughness Ra Not Applicable, Maximum Pressure - Operating 2,000 psi, Maximum Pressure - Steam 100 psi, Maximum Pressure - Combustible Gas Not Rated, Ball Material 304 Stainless Steel, Ball Port Style Standard Port, Handle - Locking Locking, Handle Type Lever