Pride - CHARGER,OFFBOARD,LOW INHIBIT,AC 100V-240V,DC 28.6V @3.5A, WITH USA CORDSET- ELE1803400

PPride - CONTROLLER,ASSY,S-DRIVE MKII,120 AMP, WRANGLER DUAL DRIVE - CTL1806259

Download the Manual 70x70mm FIELD LENS: This powerful F-theta lens from OMTech is ideal for laser marking, engraving, image transfer, material processing, and cutting systems; it creates vivid markings and flawlessly completes even your most complicated designs across its 2.8x2.8 inch work area HIGH TRANSMITTANCE: This field lens for 1064 nm lasers provides up to 99% throughput with negligible distortion thanks to its crystal clear and precision engineered borosilicate crown glass construction SUPERIOR PERFORMANCE: Our F-theta scanning lens provides fast positioning and precision focusing so you'll be able to mark steel, aluminum, gold, and more with a consistently exact 10 micron spot size anywhere in the lens's 7x7 cm field LASTING DURABILITY: Our fiber laser lenses' double-sided multilayered coatings improve their natural optical properties while also strengthening them against scratches and damage during daily use, so you can keep cutting year after year EASY INSTALLATION: The standard M85x1 threading ensures easy installation, quickly replacing or upgrading the old lens in most laser marking machines on the market, including all those from OMTech Engrave better and faster with this ultra-high transmittance fiber laser field lens from OMTech! Whether you're replacing a worn scan lens or upgrading, this fiber laser lens offers extreme precision and peak optical performance across its entire 70x70mm work area to get all your stone, glass, and metal marking done right. Manufactured from premium borosilicate crown glass, this galvo scanner lens boasts strongly antireflective coatings on both sides to give you a light transmittance rate better than 99% at the 1064nm wavelength critical for CW, QCW, and Nd:YAG lasers. To ensure the longest possible service life, the coating on both sides of the lens also helps it resist scratches and other damage during daily use. The standard M85x1 threading lets you easily install this optical lens onto the galvanometer of most fiber etching machines, including all those from OMTech. With OMT's brand-new F theta lens, your laser engraving, cutting, etching, and marking work has never been easier! Specifications Material: K9 Glass, Plastic Scanning Area: 2.8x2.8 in. (70x70 mm) Operating Wavelength: 1064 nm (1.064 μm) Focal Length: 3.9 in. (100 mm) Entrance Beam Diameter: 0.4 in. (10 mm) Spot Size: 10 μm Working Distance: 4.5 in. (115.5 mm) Threading: M85x1 Overall Dimensions: 2x3.5 in. (52x88 mm) Net Weight: 10.9 oz. (310g) Package List 1 x Fθ Field Lens 1 x Instructions

Features HIGH PERFORMANCE: OMTech's 100W laser power supply for 80W, 90W, and 100W laser tubes delivers excellent performance with greater than 90% efficiency, fast sub-1ms response times, and an average service life of 30,000 hours REAL-TIME LCD DISPLAY: The integrated LCD display gives real-time feedback on the output current's amperage as well as the status of the laser and its water protection system for convenient monitoring DUAL FAULT PROTECTION: A protection circuit combined with a durable enclosure case ensure our power supply properly handles overcurrent up to 130% and short-time open-circuit faults for an extended life span WIDE COMPATIBILITY: Our versatile power supply easily connects with any 80W to 100W CO2 laser system from OMTech or other manufacturers, so you can enjoy easier & more efficient engraving and extend your machine’s service life SIMPLE INSTALLATION: Each connection port is clearly labeled to facilitate quick and easy installation, while the widely compatible design ensures that connector boxes of various tube models can be plugged in directly EXCEPTIONAL ENDURANCE: Rigorously tested, this versatile CO2 laser power supply provides the highest quality and efficiency on the market, withstanding 12 hours of full load testing at 140°F, 2 hours of 3D motion testing, and 500 times of start/stop testing in 7 seconds SUPERIOR SUPPORT & SERVICE: Order this retrofit laser engraver accessory from OMTech today and enjoy fast US-based delivery, a strong 1 year general warranty. OMTech's 100W laser power supply is designed to deliver greater than 90% efficiency and quick 1-millisecond response times for your CO2 laser engraving machine. This digital power supply's LCD display shows current output amperage as well as the status of your machine's water protection system and laser signal to offer real-time feedback. Thoroughly quality-tested, this laser power supply provides an average of 30,000 hours of service thanks to its 130% overcurrent protection and short-time open-circuit protection. Widely compatible, our compact power supply directly connects to a variety of devices with 80W to 100W laser tubes as a great replacement or upgrade. The clearly labeled ports of our power supply replacement for CO2 laser engravers along with OMTech’s detailed instructions guide easy setup, so you can start enjoying easier & more efficient engraving and extend your machine’s service life right away! Specifications Material: Iron, Copper, ABS Color: Black Dimensions: 9.1 x 6.3 x 3.6 in. (23x16.1x9.1 cm) Rated Power: 100W Input Power: 110V AC Input AC Frequency: 47-440Hz Max. Output Voltage: 28kV DC Max. Output Current: 30mA DC Efficiency: 91% Est. Service Life (MTTF): 30,000 hr. Max. Response Time: 1 Millisecond Min. High-Level Voltage: 3.0V Max. Low-Level Voltage: 0.8V Max. Safe Humidity: 85% Operational Temp. Range: -22 to 149°F (-30 to 65°C) Max. Overcurrent Protection: 130% Open-Circuit Protection: Short Time Cooling System: Forced-Air Cooling (FAC) Temperature Testing: Full Load for 12 Hours at 140°F (60°C) Antiknock Testing: 3D Motion for 2 Hours Start/Stop Testing: 500x in 7 sec. Net Weight: 6.2 lb. (2.8 kg) Warranty: 1 Year Package List 1 x 100W Laser Power Supply 1 x Instruction Manual Product ID: LPS-D100-00

Download the Manual 200x200mm FIELD LENS: This powerful F-theta lens from OMTech is ideal for laser marking, engraving, image transfer, material processing, and cutting systems; it creates vivid markings and flawlessly completes even your most complicated designs across its 7.9x7.9 inch work area HIGH TRANSMITTANCE: This field lens for 1064 nm lasers provides up to 99% throughput with negligible distortion thanks to its crystal clear and precision engineered borosilicate crown glass construction SUPERIOR PERFORMANCE: Our F-theta scanning lens provides fast positioning and precision focusing so you'll be able to mark steel, aluminum, gold, and more with a consistently exact 20 micron spot size anywhere in the lens's 20x20 cm field LASTING DURABILITY: Our fiber laser lenses' double-sided multilayered coatings improve their natural optical properties while also strengthening them against scratches and damage during daily use, so you can keep cutting year after year EASY INSTALLATION: The standard M85x1 threading ensures easy installation, quickly replacing or upgrading the old lens in most laser marking machines on the market, including all those from OMTech Engrave better and faster with this ultra-high transmittance fiber laser field lens from OMTech! Whether you're replacing a worn scan lens or upgrading, this fiber laser lens offers extreme precision and peak optical performance across its entire 200x200mm work area to get all your stone, glass, and metal marking done right. Manufactured from premium borosilicate crown glass, this galvo scanner lens boasts strongly antireflective coatings on both sides to give you a light transmittance rate better than 99% at the 1064nm wavelength critical for CW, QCW, and Nd:YAG lasers. To ensure the longest possible service life, the coating on both sides of the lens also helps it resist scratches and other damage during daily use. The standard M85x1 threading lets you easily install this optical lens onto the galvanometer of most fiber etching machines, including all those from OMTech. With OMT's brand-new F theta lens, your laser engraving, cutting, etching, and marking work has never been easier! Specifications Material: K9 Glass, Plastic Scanning Area: 7.9x7.9 in. (200x200 mm) Operating Wavelength: 1064 nm (1.064 μm) Focal Length: 11.4 in. (290 mm) Entrance Beam Diameter: 0.4 in. (10 mm) Spot Size: 32 μm Working Distance: 11.8 in. (299 mm) Threading: M85x1 Overall Dimensions: 1.9x3.5 in. (49x88 mm) Net Weight: 10.9 oz. (310g) Package List 1 x F-Theta Field Lens 1 x Instructions

Financing is not available for pre-owned units Condition: Functional: This machine has been previously owned, returned to the Anaheim headquarters, and repaired and tested by OMTech Specialists. The device may have some signs of cosmetic wear and/or structural damage, but is fully operational and functions 100% as intended. PLEASE NOTE: The images shown in this listing do not fully represent the cosmetic condition of the machine. OMTech Certified: This machine has undergone a thorough QA inspection by an OMTech Specialist, and each component has been repaired and tested for full operational performance. Photo Guide: View condition examples of previous Pre-Owned models: Click Here Safe Shipping: This unit is carefully secured to a reinforced pallet and protected with several layers of bubble wrap for a dependable delivery. Replace your old laser tube and optimize your laser engraver and cutter machine's performance with OMTech's highly efficient 130W CO2 laser tube! Made of tough borosilicate glass, this 1650 mm (65") long 80 mm (3.1") wide CO2 laser tube is superior to its competitors as it incorporates gold catalyst nanocoating and high-end German technology into the engineering of its glass tube construction, making it more durable to withstand high temperature and pressure. It is cost-efficient yet dependable with up to 6,000 hours of service life. The built-in tubing and ports on this laser engraver replacement tube allow easy connection to your water chiller or pump and efficient cooling during operation. To meet your needs, we offer a variety of laser tubes from 40W to 150W. Get your replacement laser tube from OMTech and start enjoying its superior quality and efficient performance today! Features POWERFUL LASER TUBE: OMTech's 130W CO2 laser tube, with tempered borosilicate glass, premium II-VI infrared lens, gold catalyst coating, and 10,000 hour long service life, ensures powerful and stable laser beam for optimal performance PRECISION MASTERPIECES: Achieve precise cuts using your laser engraver and cutter machines with this single-mode laser cutter tube, which features a 6 mm focused beam spot and an American II-VI infrared lens for reduced light attenuation SAFE OPERATION: With integrated water tubing and ports, our laser engraver replacement tube allows for efficient cooling and easy connection to a water pump or water chiller, while the hermetically sealed borosilicate glass case offers exceptional durability WIDE APPLICATION: This 1650 mm (65") long 80 mm (3.1") wide laser tube operates at 27kV and 7mA for engraving acrylic, cardboard, ceramics, fabric, glass, leather, paper, stone, wood, and more SATISFICATION GUARANTEED: Order this laser engraving machine tube from OMTech today and enjoy fast US-based shipping, easy hook-up with preinstalled connection wires and ports, an industry-leading 16 month warranty, and ever helpful customer service and tech support Specifications Material: Borosilicate Glass, Metal Laser Tube Type: CO2-Filled Glass Cooling Method: Water Rated Power: 130W Length: 65 in. (1650 mm) Diameter: 3.1 in. (80 mm) Wavelength: 10,600 nm Beam Quality: 1.3 m2 Max. Beam Diameter: 0.2 in. (6 mm) Operating Voltage: 27kV Operating Current: 7mA Rec. Water Temperature: 60-75°F (15-25°C) Expected Lifespan (MTTF): 10,000 hr. Net Weight: 7.3 lb. (3.3 kg) Warranty: 16 mo. Package List 1x CO2 Laser Tube 1x Instructions 1x Dust Cover

Cutting Edge Features: HIGH-QUALITY CVD ZnSe: OMTech's powerful focus lenses are manufactured from premium zinc selenium via chemical vapor deposition for superior optical properties. HIGH TRANSMITTANCE: Both sides of each lens are covered with strongly antireflective coatings to achieve at least 99.5% transmittance rate for infrared light at a wavelength of 10.6 microns. LASTING DURABILITY: Our laser engraver focus lenses' double-sided coating process also ensures outstanding scratch resistance for longer service life. WIDE COMPATIBILITY: This 18mm laser focus lens fits OMTech 50W-100W CO2 laser engravers. Please check the focal lens diameter in your machine’s manual before purchasing. EASY TO USE: The plano-convex shape of OMTech's engraver focal lens lets you install it easily and correctly onto your machine in the proper orientation. Detailed cleaning instructions also help you take proper care of your lens. Specifications: Material: Zinc Selenium Color: Yellow Diameter: 18mm (0.71") Thickness: 2mm (0.08") Focal Length: 1.5" (38.1mm)/ 2" (50.8mm)/ 2.5" (63.5mm)/ 3" (76.2mm)/ 4" (101.6mm) Rec. Wavelength: 10.6 microns (10600 nm) Min. Light Transmittance: 99.5% Net Weight: 0.2 oz (5g) Package Includes: 1 x CVD ZnSe Focus Lens Warranty: No need to worry! We offer a 1-year warranty on all focal lenses. Certifications: FDA Compliant CE Certification ISO9001 Quality Certification Summary: It is all smoke and mirrors! As you engrave, debris such as smoke and dust land on your focal lens, building up a layer of residue over time that absorbs laser beam power and can stain the lens permanently. Eventually, this lost power will affect your machine’s precision and throw off your laser settings. To keep your device running at its full potential, we recommend inspecting and cleaning the optics system once a week and replacing the mirrors or focal lens as soon they get damaged. Compatible Machines: MF1220;MF1642;MF2028 (old version-red&black ver.) ;AF2028;AF2435

Air filters need to be replaced on their regular cycle to avoid clogs that can result in substandard air quality and equipment malfunctions. OMTech has you covered with a premium 3-in-1 filter. This single unit combines an F8 fiberglass layer for dust, a 1200 iodine activated carbon layer for unpleasant odors such as formaldehyde and benzene, and an H13 HEPA layer for fine particles—effectively tackling both particulate and gaseous pollutants in one pass. An exact filter for our OSP060 fume extractors, this unit permits quick and easy replacement to help extend your fume purifier's service life. Keep your 60W chugging along with this replacement filter set and keep your worksite as safe and clean as ever!

Air filters need to be replaced on their regular cycle to avoid clogs that can result in substandard air quality and equipment malfunctions. OMTech is here to back you up with not one, but five premium prefilters. They are the exact same primary filters used in our 60W fume extractors. Each primary air filter serves as the first line of defense against your work's harmful fumes. Thanks to its high filtration efficiency, this filter replacement easily removes airborne particles 10 microns and larger—including dust, debris, and more—as you work on fume-heavy applications like laser engraving, CNC machining, soldering, and welding. This air filter's intuitive design provides quick and easy replacement, after which each piece will help extend your fume purifier's service life. Keep your OSP060 chugging along with this prefilter replacement set and keep your worksite as safe and clean as ever!"

Financing is not available for pre-owned units Condition: Good: This machine has been previously used, returned to the Ontario headquarters, and repaired and tested by OMTech Specialists. The device may have some cosmetic wear and/or signs of use but is fully operational and functions 100% as intended. PLEASE NOTE: The images shown in this listing do not fully represent the cosmetic condition of the machine. OMTech Certified: This machine has undergone a thorough QA inspection by an OMTech Specialist, and each component has been repaired and tested for full operational performance. Photo Guide: View condition examples of previous Pre-Owned models: Click Here Safe Shipping: This unit is carefully secured to a reinforced pallet and protected with several layers of bubble wrap for a dependable delivery. Precision Engraving: Our CO2 Laser Tubes produce stable laser beams for precise markings on a wide variety of materials. High Power: Rated Power: 100W Peak Power: 120W Beam Diameter: 5mm Operating Voltage: 24 KV Wavelength: 10,640 nm Cut up to 1.2" thick plywood and acrylic/plexiglass Lifetime: 100W Borosilicate Glass CO2 Laser Tube with an estimated lifetime of up to 8,000 operation hours depending on power setting usage and water cooling performance PLEASE NOTE: Frequent use of high laser power settings will shorten the laser tube lifetime as follows: Low Power 10–40% = 7,000–8,000 Hours Moderate Power 40–70% = 5,000–6,500 Hours High Power 70–100% = 3,000–4,000 Hours Easy to Install: The preinstalled Cathode and Anode Wires allow quick and effortless setup. Additional Features: Product Length: 4’ 9” (1450mm) Product Diameter: 80mm Net Weight: 6.6 lb Allowable Humidity: <85% The water outlet and inlet allow efficient flow of cooling water. Made out of borosilicate glass, copper, and plastic Optimum cooling water temperature between 60-70°F (15-19°C) Package Includes: 1 x 100W Laser Tube 1 x User Manual (English) Warranty: No need to worry! We offer a 1-year warranty on all laser tubes 80W and up. Certifications: FDA Compliant CE Certification ISO9001 Quality Certification

Compatible Machines: DF0812 Advanced Specifications: Anti-reflective coated lens for <200W. Type: Meniscus Laser Focal Lens Material: ZnSe Laser Grade (made in the USA) Coating: 10.6um (AR Both Side) Diameter Tolerance: +0/-0.13mm Center Thickness Tolerance: ± 0.1mm Focal Length Tolerance: < 1% Clear Aperture: >= 90% Diameter Scratch/Dig: 40-20 Cutting Edge Features: OMTECH TESTED: Each American Photonics focal lens is tested on OMTech machines and approved by our laser specialists. QUALITY ZINC SELENIDE: Manufactured with premium zinc selenium via chemical vapor deposition for superior light transmission and heat tolerance. EXACTING LENS DIMENSIONS: Each lens is engineered and built with only a 0.003mm margin for error to ensure finer laser focus on high-resolution engravings and enable sharper cutting abilities. ULTRA-PURE MANUFACTURING: American Photonics utilizes an ultra-clean production room to ensure every focal lens is free from all impurities, reducing heat damage and ensuring extremely consistent laser beam transmission. HANDMADE IN THE USA: Each American Photonics focal lens is cored, polished, edged, coated, and packaged by hand with expert precision in each step. EXTREME HEAT TOLERANCE: Crafted to resist heat damage, cracking, and staining. A melting point of 2777°F (1525°C) easily withstands the thermal demands of CO2 laser applications. SUPERIOR LIGHT TRANSMITTANCE: Both sides are carefully coated with a strongly anti-reflective finish optimized for infrared light at a wavelength of 10.6 microns. LASTING DURABILITY: Our laser engraver focus lenses' double-sided coating process ensures outstanding scratch resistance for longer service life. WIDE COMPATIBILITY: This laser focus lens is designed to work with all CO2 laser engravers below 200W. Please check the focal lens diameter in your machine’s manual before purchasing. Summary: As you engrave, debris such as smoke and dust land on your focal lens, building up a layer of residue over time that absorbs laser beam power and can stain the lens permanently. Eventually, this lost power will affect your machine’s precision and throw off your laser settings. To keep your device running at its full potential, we recommend inspecting and cleaning the optics system once a week and replacing the mirrors or focal lens as soon they get damaged. How to Select the Proper Focal Length: A lens with a shorter focal length (1.5"–2.5") has a smaller focal point to provide sharper details for high-resolution images. A longer focal length (usually up to 4") has a larger focal point and extended depth of focus (or focus tolerance) which is better suited for cutting applications. Also, keep in mind that using longer focal lengths subtract from your workbed’s Z-depth. Warranty: American Photonics provides a 30-Day 100% Guarantee

Replace your old laser tube and optimize your laser engraver and cutter machine's performance with OMTech's highly efficient 50W CO2 laser tube! Made of tough borosilicate glass, this 850 mm (33.4") long 50 mm (2") wide CO2 laser tube is superior to its competitors as it incorporates gold catalyst nanocoating and high-end German technology into the engineering of its glass tube construction, making it more durable to withstand high temperature and pressure. It is cost-efficient yet dependable with up to 6,000 hours of service life. The built-in tubing and ports on this laser engraver replacement tube allow easy connection to your water chiller or pump and efficient cooling during operation. To meet your needs, we offer a variety of laser tubes from 40W to 150W. Get your replacement laser tube from OMTech and start enjoying its superior quality and efficient performance today! Features POWERFUL LASER TUBE: OMTech's 50W CO2 laser tube, with tempered borosilicate glass, premium II-VI infrared lens, gold catalyst coating, and 6,000 hour long service life, ensures powerful and stable laser beam for optimal performance PRECISION MASTERPIECES: Achieve precise cuts using your laser engraver and cutter machines with this single-mode laser cutter tube, which features a 4 mm focused beam spot and an American II-VI infrared lens for reduced light attenuation SAFE OPERATION: With integrated water tubing and ports, our laser engraver replacement tube allows for efficient cooling and easy connection to a water pump or water chiller, while the hermetically sealed borosilicate glass case offers exceptional durability WIDE APPLICATION: This 850 mm (33.4") long 50 mm (2") wide laser tube operates at 18kV and 4mA for engraving acrylic, cardboard, ceramics, fabric, glass, leather, paper, stone, wood, and more SATISFICATION GUARANTEED: Order this laser engraving machine tube from OMTech today and enjoy fast US-based shipping, easy hook-up with preinstalled connection wires and ports, an industry-leading 9 month warranty, and ever helpful customer service and tech support Specifications Material: Borosilicate Glass, Metal Laser Tube Type: CO2-Filled Glass Cooling Method: Water Rated Power: 50W Length: 33.4 in. (850 mm) Diameter: 2 in. (50 mm) Wavelength: 10,600 nm Beam Quality: 1.3 m2 Max. Beam Diameter: 0.2 in. (4 mm) Operating Voltage: 18kV Operating Current: 4mA Rec. Water Temperature: 60-75°F (15-25°C) Expected Lifespan (MTTF): 6,000 hr. Net Weight: 2.4 lb. (1.1 kg) Warranty: 9 mo. Package List 1x CO2 Laser Tube 1x Instructions

Replace your old laser tube and optimize your laser engraver and cutter machine's performance with OMTech's highly efficient 130W CO2 laser tube! Made of tough borosilicate glass, this 1650 mm (65") long 80 mm (3.1") wide CO2 laser tube is superior to its competitors as it incorporates gold catalyst nanocoating and high-end German technology into the engineering of its glass tube construction, making it more durable to withstand high temperature and pressure. It is cost-efficient yet dependable with up to 6,000 hours of service life. The built-in tubing and ports on this laser engraver replacement tube allow easy connection to your water chiller or pump and efficient cooling during operation. To meet your needs, we offer a variety of laser tubes from 40W to 150W. Get your replacement laser tube from OMTech and start enjoying its superior quality and efficient performance today! Features POWERFUL LASER TUBE: OMTech's 130W CO2 laser tube, with tempered borosilicate glass, premium II-VI infrared lens, gold catalyst coating, and 10,000 hour long service life, ensures powerful and stable laser beam for optimal performance PRECISION MASTERPIECES: Achieve precise cuts using your laser engraver and cutter machines with this single-mode laser cutter tube, which features a 6 mm focused beam spot and an American II-VI infrared lens for reduced light attenuation SAFE OPERATION: With integrated water tubing and ports, our laser engraver replacement tube allows for efficient cooling and easy connection to a water pump or water chiller, while the hermetically sealed borosilicate glass case offers exceptional durability WIDE APPLICATION: This 1650 mm (65") long 80 mm (3.1") wide laser tube operates at 27kV and 7mA for engraving acrylic, cardboard, ceramics, fabric, glass, leather, paper, stone, wood, and more SATISFICATION GUARANTEED: Order this laser engraving machine tube from OMTech today and enjoy fast US-based shipping, easy hook-up with preinstalled connection wires and ports, an industry-leading 16 month warranty, and ever helpful customer service and tech support Specifications Material: Borosilicate Glass, Metal Laser Tube Type: CO2-Filled Glass Cooling Method: Water Rated Power: 130W Length: 65 in. (1650 mm) Diameter: 3.1 in. (80 mm) Wavelength: 10,600 nm Beam Quality: 1.3 m2 Max. Beam Diameter: 0.2 in. (6 mm) Operating Voltage: 27kV Operating Current: 7mA Rec. Water Temperature: 60-75°F (15-25°C) Expected Lifespan (MTTF): 10,000 hr. Net Weight: 7.5 lb. (3.4 kg) Warranty: 16 mo. Package List 1x CO2 Laser Tube 1x Instructions

Download the Manual 300x300mm FIELD LENS: This powerful F-theta lens from OMTech is ideal for laser marking, engraving, image transfer, material processing, and cutting systems; it creates vivid markings and flawlessly completes even your most complicated designs across its 11.9x11.9 inch work area HIGH TRANSMITTANCE: This field lens for 1064 nm lasers provides up to 99% throughput with negligible distortion thanks to its crystal clear and precision engineered borosilicate crown glass construction SUPERIOR PERFORMANCE: Our F-theta scanning lens provides fast positioning and precision focusing so you'll be able to mark steel, aluminum, gold, and more with a consistently exact 20 micron spot size anywhere in the lens's 30x30 cm field LASTING DURABILITY: Our fiber laser lenses' double-sided multilayered coatings improve their natural optical properties while also strengthening them against scratches and damage during daily use, so you can keep cutting year after year EASY INSTALLATION: The standard M85x1 threading ensures easy installation, quickly replacing or upgrading the old lens in most laser marking machines on the market, including all those from OMTech Engrave better and faster with this ultra-high transmittance fiber laser field lens from OMTech! Whether you're replacing a worn scan lens or upgrading, this fiber laser lens offers extreme precision and peak optical performance across its entire 300x300mm work area to get all your stone, glass, and metal marking done right. Manufactured from premium borosilicate crown glass, this galvo scanner lens boasts strongly antireflective coatings on both sides to give you a light transmittance rate better than 99% at the 1064nm wavelength critical for CW, QCW, and Nd:YAG lasers. To ensure the longest possible service life, the coating on both sides of the lens also helps it resist scratches and other damage during daily use. The standard M85x1 threading lets you easily install this optical lens onto the galvanometer of most fiber etching machines, including all those from OMTech. With OMT's brand-new F theta lens, your laser engraving, cutting, etching, and marking work has never been easier! Specifications Material: K9 Glass, Plastic Scanning Area: 11.9x11.9 in. (300x300 mm) Operating Wavelength: 1064 nm (1.064 μm) Focal Length: 16.9 in. (430 mm) Entrance Beam Diameter: 0.4 in. (10 mm) Spot Size: 32 μm Working Distance: 22 in. (560 mm) Threading: M85x1 Overall Dimensions: 1.9x3.5 in. (49x88 mm) Net Weight: 10.9 oz. (310g) Package List 1 x F-Theta Field Lens 1 x Instructions

Faster shipping. Better service

Faster shipping. Better service

Faster shipping. Better service

Faster shipping. Better service

Faster shipping. Better service

Faster shipping. Better service

Precio bajo con envío gratis para usuario nuevo.

Precio bajo con envío gratis para usuario nuevo.