Orbit Irrigation Nipple Extractor Set 26076 - 1 Nipple Extractor - 3 Pieces

Specification:

Straight flute design downward chip removal fast tapping with accuracy. High hardness and toughness for wear resistance. Uxcell 2-56 UNC 2B 3 Straight Flutes Machine Thread Tap M42 High Speed Steel. M42 is a high-speed steel alloy with 8% or 10% cobalt with superior red hardness than conventional high-speed steels. M42 is less prone to chipping when used for interrupted cuts and costs less than the same tools made of carbide. Suitable for processing through holes or shallow blind holes . Perfect for drilling and tapping materials below HRC30 such as alloy steel cast iron stainless steel brass aluminum etc.. Used on drilling machines tapping machines CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Features just the base substrate without any additional coatings suitable for wide ranges of applications. Machine taps are suggested to be used with tap collets with overload protection. Hand use or electric drills use is easy to cause breakage to the tap so it is not recommended. Please add coolant when tapping and apply anti-rust oil for maintenance.

Descriptions: Uxcell M6 x 0.75mm Metric Left Hand Tap and Die Set Machine Thread Tap with Round Die 1. Tap and die set are suitable for making or repairing male and female threads good for general purpose applications. Tap and die are both right hand thread. 2. Can be used to process through holes in maintenance and repair work. Great for drilling and tapping alloy steel die steel cast iron ferrous and non-ferrous materials etc.. 3. High speed steel machine screw tap provides combination of hardness and toughness for wear resistance. Alloy tool steel round die features good abrasion resistance. Tap and die set are sharp and durable and with clear threads to meet the processing requirements. 4. Round dies can be used with die wrench (not included). The fastening screw in the middle of the wrench should be inserted into the slot of the die and tightened. Machine taps are used on drill presses tapping machines CNC and milling machines. 5. Used with tapping oil can get threads and make taps and dies more durable. Suitable lubricating oil should be added to the cutting edge of dies and taps when tapping.

Manufacturer Part Number: T/A54359 Premium Grade Steel HSS Hand Tap Set Size: #10-32 Limit H3 Number of Flutes 4 Other Details Size: #10-32 Material: High Speed Steel Finish: Bright Style: Set Cutting Direction: Right Hand NOTE: International deliveries are not available. The item can t be shipped to AF AA AC AE AM AP in the Unite States.

Spiral Point Tap Thread Size M8x1.25 Metric Coarse Overall Length 2 23/32 in High Speed Steel Bright (Uncoated) Right Hand Thread Length 1 1/8 in Thread Limit D5 Class of Fit 3B Number of Flutes 2

Features and Benefits: Etched: Tap size and recommended drill bit size are etched on each tool for easy identification All Hanson taps and dies are made in USA Ideal for auto repair and machinery where metric threads are specified The first number represents the diameter of the tap in millimeters the second number is the distance between the threads in millimeters

Manufacturer Part Number: DWTMHX20X1.5 Product Description Carbon Steel Hex Dies Size: 20X1.5 Other Details Size: m20 x 1.5 Material: Carbon Steel Finish: Uncoated (Bright) Style: Hex Die Cutting Direction: Right Hand

Steel Dragon Tools® 7991 1/2 - 1 Power Pipe Threader Threading Machine and Self Oiling Die Head The Steel Dragon Tools® 7991 is a self-oiling 1/2-inch to 1-inch pipe threading machine with quick-opening die head. The Steel Dragon Tools® 7991 offers a large carriage and cutter handles with unique one blade reamer. The pipe threading machine is light and compact with a built in carrying handle. Includes die head dies replacement brush set oiling can and mounting tools.Pipe Capacity: 1/2 in. to 1 in. Motor: 110 V 50/60 Hz 650 W Motor has brake for enhanced operational safety. Fits Wheeler-Rex® dies. Quick-open auto-oiling notch type die head. Front and rear chucks. Large carriage and cutter handles. Unique one-blade reamer. Large scrap tray. Built-in carrying handle.Includes1/2-inch to 1-inch quick-opening die head. 1/2-inch to 3/4-inch and 1-inch RH dies. Also includes replacement brush set oiling can and mounting tools.To ensure optimal performance and longevity of your pipe threading machine we recommend greasing and/or lubricating your machine upon arrival and regularly greasing and/or lubricating all moving parts especially the threading dies and carriage mechanisms. Proper greasing and/or lubrication minimizes wear reduces friction and enhances overall machine efficiency. Heavy use of your machine may require more frequent greasing and/or lubrication.WARNING: This product can expose you to chemicals including DHEP which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.govThis product is designed and manufactured by Steel Dragon Tools®. Wheeler-Rex Inc.® is a trademark of Wheeler Manufacturing a division of Rex International and is used for product identification purposes only.

Spiral Point Tap Thread Size M6x1 Metric Coarse Overall Length 63.00 mm HSS-E Black Oxide Right Hand Thread Length 11.00 mm 75 Percent Thread Drill Size 5.00 mm Thread Limit D5 Number of Flutes 3 WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov -

Spiral Point Tap Thread Size #10-24 UNC UNJC Overall Length 2 3/8 in High Speed Steel Bright (Uncoated) Right Hand Thread Length 7/8 in 75 Percent Thread Drill Size #25 Thread Limit H2 Class of Fit H3 Number of Flutes 2

Thread tap features spiral flutes clear threads without burrs and right hand thread cutting. Spiral flutes are fully ground to provide upward chip removal. Flutes on the screw tap help to remove chips and debris from the hole. 6542 (M2) high speed steel screw taps run at high speeds and generate threads quickly and efficiently offering high hardness wear resistance and good toughness. Titanium coating provides excellent corrosion resistance and reduces the coefficient of friction for smoother tapping. Spiral flute threading tap is suitable for processing blind holes and sticky materials. Used for drilling and tapping stainless steel aluminum die steel ordinary steel non-ferrous metals and hard plastics. Machine threading tap is used with drill presses tapping machines CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap chucks with overload protection. It is not recommended for hand use and electric drill tapping. Tapping angle should be 90 degrees vertical and stable. The tapping depth should not exceed 1.5 times the diameter of the tap. Control the speed according to the material hardness. The higher the hardness the slower the speed.

Spiral Point Tap Thread Size #8-32 UNC Overall Length 2 3/32 in HSS-E Bright (Uncoated) Right Hand Thread Length 5/16 in 75 Percent Thread Drill Size 3.40 mm Thread Limit H5 Class of Fit JIS 2 Number of Flutes 3 WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov -

Manual Threader Die Head Maximum Compatible Pipe Size 1 in Minimum Compatible Pipe Size 1 in Head Opening Type Manual Thread Type NPT Compatible Thread Direction Right Hand Compatible Dies Manual Threader Compatible Threader Type Manual Threader Threading Machine Compatible Mfr. Model No. 37777 38550 44913 44918 44923 44928 Through-the-Head Oiling No Compatible Grainger Part Number 1VUT7 5A189 Die Head Type 11R Die Material Alloy Steel Die Sizes 1 in Fits Brand Ridgid

Spiral Flute Tap Thread Size #8-32 UNC Overall Length 2 3/32 in HSS-E-PM Black Oxide Thread Length 1/4 in 75 Percent Thread Drill Size 3.40 mm Thread Limit H3 Class of Fit 3B Thread Direction Right Hand Number of Flutes 3

Spiral Point Tap Thread Size 5/8 In.-11 UNC Overall Length 3 25/32 in High Speed Steel Bright (Uncoated) Right Hand Thread Length 1 1/16 in 75 Percent Thread Drill Size 13.60 mm Thread Limit H3 Class of Fit 2B Number of Flutes 3 WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov -

The round die is suitable for re-threading existing threads in hard materials like metal or making new threads in soft material like plastic. Used for threading mild steel aluminum stainless steel cast iron alloy steel and carbon steel. Fit for general purpose threading and for maintenance and repair work. Conical locking hole strong locking and not loose. The round die has good abrasion resistance. The die stock handle can help to repair broken bolts and threads or just remove bolts and threaded rod when used with round dies. With adjustable screws the die stock can securely hold round dies and is easy to operate. Made of 45# carbon steel It has high hardness high strength and resistance to deformation than ordinary A3 steel. The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench and the screw should be inserted into the slot of the die and tightened. Necessary tools for hand tapping operation can improve the efficiency of processing threads. It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping threads.

Spiral Point Tap Thread Size 3/8 In.-16 UNC Overall Length 2 15/16 in High Speed Steel Bright (Uncoated) Right Hand Thread Length 3/4 in 75 Percent Thread Drill Size 0.3125 in Thread Limit H3 Class of Fit 2B Number of Flutes 3

Straight Flute Tap Thread Size 1 In.-8 UNC Taper Overall Length 5 3/32 in High Speed Steel Bright (Uncoated) Right Hand Thread Length 1 13/16 in 75 Percent Thread Drill Size 22.25 mm Thread Limit H4 WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov -

Drill America DWT Series Qualtech High-Speed Steel round adjustable die is desired for improved wear life. Round Dies are chamfered on both faces. One side has a 2 to 3 thread chamfer for threading the other side has a 1 to 1-1/2 thread chamfer for threading close to a shoulder. Adjustment is obtained by a fine pitch screw which forces the sides of the die apart or allows them to spring together. The slot is beveled so that when the die is use in a machine holder the adjusting screw can be removed and adjustment made by the adjusting screws in the holder.

Spiral Flute Tap Thread Size #4-40 UNC Overall Length 1 7/8 in High Speed Steel Bright (Uncoated) Thread Length 9/16 in 75 Percent Thread Drill Size 2.20mm Thread Limit H2 Class of Fit 2B Thread Direction Right Hand Number of Flutes 2