Intake Manifold for 2007-2018 Dodge Ram 2500/3500 6.7L Diesel All In One Kits | SPELAB - 2013-2018 Intake Manifold/NEW / 2007-2024 Grid Heater Delete / Sliver

---tab Description--- Description The Factory Plastic Will Fail. It’s Not a Matter of "If," But "When." If you drive a 6.7L Powerstroke, you are likely driving with a known weak link: the OEM plastic intake manifold and intercooler pipes. Over time, heat cycles and high boost pressure cause these plastic components to crack, warp, or burst completely—often leaving you stranded in "limp mode" while towing or under heavy load. Eliminate the Weak Links with the SPELAB Intake Manifold with Intercooler Pipe Bundle. We have combined our top-tier airflow upgrades into one convenient, high-performance package. By upgrading the manifold and piping simultaneously, you ensure your engine can breathe freely, handle higher boost, and deliver consistent power without the fear of a plastic blowout. Choose Your Level of Protection: Option 1 (Essential Protection): Intake Manifold + Cold Side Pipe. Replaces the two most common failure points. Option 2 (Maximum Performance): Intake Manifold + Full Intercooler Piping (Cold & Hot Side). Replaces the entire airflow loop for maximum flow and thermal efficiency. Fitment 2011–2019 Ford F-250 / F-350 Super Duty 6.7L Powerstroke. 2015–2016 kits include an external oil feed line in the package and require replacing the factory oil feed routing as supplied. Key Features Cast Aluminum ManifoldReplaces the fragile OEM plastic manifold with heat-treated cast aluminum, designed to handle extreme boost pressures without cracking or deforming. 3.5" Mandrel-Bent TubingIncreases airflow volume significantly compared to stock, reducing turbulence and allowing for faster turbo spool-up and lower EGTs (Exhaust Gas Temperatures). Burst-Proof ReliabilityThe included Cold Side Pipe eliminates the notorious factory plastic pipe failure, utilizing polished aluminum and reinforced silicone couplers to ensure you stay on the road. Streamlined Engine BayRemoving the bulky factory components cleans up the engine bay, providing better access for maintenance and a professional, custom appearance. Optimized Flow DynamicsThe manifold features a "bridge" design that distributes air evenly to all cylinders, improving combustion efficiency and throttle response. Leak-Free ConnectionsIncludes heavy-duty 5-ply silicone boots and stainless steel T-bolt clamps that provide a vice-like grip, preventing blown boots even under high-performance tuning conditions. UNLOCK TRUE POTENTIAL: The "Clean Air" Synergy Prevents Carbon Clogging (With EGR Delete):When paired with an EGR Delete, this High-Flow Manifold stays permanently clean. Unlike stock manifolds that get choked by recycled exhaust soot, our aluminum design maintains 100% flow capacity for the life of the truck when the EGR is removed. Shop EGR Delete Kit. Eliminates Oil Sludge (With CCV Reroute):Factory trucks route oily crankcase vapors back into the intake. By adding a CCV Reroute to this bundle, you ensure that your shiny new Intercooler Pipes and Manifold remain free of sticky oil sludge, guaranteeing maximum thermal transfer and airflow efficiency. Shop CCV Delete Kit. The Result:Cleaner Engine + Cooler Air = More Horsepower & Longevity. This bundle is the foundational hardware you need to build a reliable, high-performance 6.7L Powerstroke. Specifications Manifold Material Cast Aluminum Inlet Diameter 3.5 inches Pipe Material Mandrel-Bent Polished Aluminum Coupler Material 5-Ply Reinforced Silicone Clamps Stainless Steel T-Bolt Installation Notice: The Silicone Boot and intake manifold have a tight fit. For easier installation, we suggest putting the clamp on the Silicone Boot first, then attaching the boot to the intake manifold before installing the completed assembly in your vehicle. SPELAB Intake Manifold For 2011-2019 Ford 6.7L Powerstroke ---tab FAQ--- FAQs Q: What is the difference between the "Cold Side" and "Full Kit" options?A: The Cold Side option replaces the pipe going from the intercooler to the engine intake—this is the most critical upgrade as the stock plastic pipe often bursts. The Full Kit adds the Hot Side pipe (Turbo to Intercooler), which replaces the restrictive factory resonator pipe for even better sound and flow. Q: Will this fit my 2017 or 2018 Powerstroke?A: No. While the manifold fits 2011-2019, the intercooler piping layout changed in 2017. This specific bundle is designed for the 2011-2016 model years. Q: Do I have to remove the EGR system to install this manifold?A: Yes. The SPELAB High-Flow Manifold is designed to replace the factory unit and does not have provisions for the factory EGR cooler. An EGR delete kit and appropriate tuning are required. Q: Is it hard to install?A: This is an advanced installation involving fuel lines and turbo piping. We highly recommend having a certified diesel mechanic perform the installation. Q: Why aluminum instead of plastic?A: Aluminum handles heat cycles and boost pressure significantly better than plastic. It won't become brittle over time, ensuring your truck remains reliable for years to come. ---tab Shipping & Returns--- Fast Shipping Policy Your order will be dispatched within 1-2 business days, and the package will arrive within your order's estimated date. Click for Shipping Policy Easy Return Policy Every order comes with a 14-day free return, which means you don't have to pay for a return slip. Click for Return Policy

---tab Description--- Description The SPELAB 2007-2024 6.7L Dodge Ram Intake Manifold/Horn enhances performance for 2007-2024 6.7L Dodge Ram engines with improved airflow and durability. Compatible with our EGR Delete Kit, it offers easy installation and performance whether or not the EGR is deleted. Designed with heating element provisions, you can seal the ports in warm weather or install them in colder conditions. Available in black, silver, and red, it delivers reliable performance and customization for your engine. Key Features Hassle-Free Installation: Designed for a direct fit with stock mounting points, ensuring a hassle-free installation. This upgrade doesn't require any additional tuning or modifications. Enhanced Airflow Design: Featuring a more prominent SPELAB logo, the intake manifold provides increased internal space, improving air intake for better engine performance. Precision Fit: The top cover design is expertly crafted to integrate seamlessly with the SPELAB EGR Plate, ensuring a snug fit and optimized performance. 45-Degree Sensor Port: The manifold includes a new 45-degree angled sensor connector located at the front, allowing for easy access and precise sensor installation. Advanced Stud Design: Our unique stud design extends to the exterior of the intake cylinder block with a sophisticated three-dimensional concave structure, ensuring a secure and efficient installation. Sensor & Boost-Ready: Features four 1/8” NPT threaded ports, easily install boost gauges, sensors, or other performance add-ons. Compact and Efficient: The manifold’s smaller bend angle and near 180-degree parallel alignment reduce airflow restriction, while the lower overall height enhances under-hood clearance and airflow dynamics. Enhanced Airflow with SPELAB 2007-2024 6.7 Dodge Ram Intake Manifold Upgrade The SPELAB 2007-2024 6.7 Dodge Ram intake horn is engineered to significantly increase airflow into your engine. It features a larger, unrestricted design compared to the stock intake manifold, allowing for more oxygen-rich air to reach the engine cylinders. This not only improves combustion but also boosts overall performance. In fact, this upgrade delivers an impressive 88% increase in airflow, ensuring that your engine operates at peak efficiency. 2X OEM Diameter For Dodge Ram engine requires substantial airflow, but the restrictive OEM air intake limits performance. SPELAB’s larger, high-flow intake horn—double the size of the OEM—eliminates airflow restrictions and prevents boost loss, allowing for smooth, unrestricted air delivery. Boost Performance and Fuel Efficiency The SPELAB 2007-2024 6.7 Dodge Ram High-Flow Intake Manifold/Trumpet is designed to enhance engine air intake efficiency. Its streamlined, unobstructed structure significantly increases airflow, boosting engine performance. Unlike the factory heat shields, which are prone to carbon buildup and blockage over time, SPELAB’s innovative use of heating elements replaces traditional heating methods, effectively preventing blockages while maintaining optimal performance. This product is the ideal choice for improving engine power and reliability. Specifications Material Cast Aluminum Alloy Weight 4.2 kg (9.26 lbs) Package Dimensions 37 × 27 × 24.5 cm (14.6 × 10.6 × 9.6 inches) Manifold Inlet Size 3-3/8 inch Installation Type Direct Bolt-On (No Modifications Required) Ports Included 4 × 1/8" NPT Threaded Ports Heating Element Included No (Heating element must be purchased separately if needed.) Tuning Requirement Not Required Fuel System Compatibility Fully compatible with OEM fuel lines & emission equipment Heating Element Usage The heating element is optional and only necessary when operating in temperatures below 0°C (32°F). Fitment 2007-2024 6.7 Dodge Ram intake manifold/Horn: Dodge Ram 2500/3500 6.7L Diesel Intake manifold kit for chassis cab: 2013-2018 Dodge Ram 3500-5500 6.7L Chassis-Cab Only (Also Fits Dual-Alternator Engines) Grid Heater Delete Plate: 2007-2024 Dodge Ram 2500/3500 6.7L Dodge Ram Diesel Installation SPELAB Intake Manifold For 2013-2024 6.7L Dodge Ram ---tab Why SPELAB--- Benefits of Upgrading to SPELAB 2007-2024 6.7 Dodge Ram Intake Manifold Increased Air Density and Boost Efficiency This 2007-2024 6.7 Dodge Ram intake manifold upgrade increases air density by improving airflow to the cylinders, leading to more efficient combustion and higher boost efficiency. With its unique design, the SPELAB manifold allows your engine to handle higher boost levels without adding stress to the turbine, ensuring smoother, more reliable performance. This means better performance for towing, off-roading, or high-speed driving. Faster Throttle Response and Better Combustion The SPELAB 2007-2024 6.7 Dodge Ram intake manifold upgrade also helps deliver faster throttle response by allowing more air into the engine quicker. This provides more immediate power delivery, making your truck feel more responsive and easier to control, whether you're accelerating on the highway or navigating tough off-road conditions. Easy Installation and Compatibility with for 6.7 Dodge Ram Hassle-Free Installation The SPELAB 2007-2024 6.7 Dodge Ram intake manifold upgrade is designed for a direct fit with stock mounting points, ensuring a hassle-free installation. This upgrade doesn't require any additional tuning or modifications. The package includes all necessary hardware, such as paper gaskets, washers, bolts, and a proprietary fuel line, ensuring a smooth and seamless installation process. Stock Compatibility This for Dodge Ram intake manifold upgrade is fully compatible with your engine’s existing components, ensuring a seamless fit without requiring any additional modifications. It also comes with a robust 3-3/8 inch inlet and four 1/8 inch NPT ports, allowing for flexible sensor integration and easy customization to suit your specific performance needs. SPELAB Intake Manifold Upgrade Materials and Options Durable Aluminum Alloy Construction The SPELAB 2007-2024 6.7 Dodge Ram intake manifold is crafted from high-grade aluminum alloy, offering superior durability and heat resistance. This ensures that the manifold can withstand the rigors of high-performance driving while maintaining consistent performance, even under extreme conditions. Finish Options to Match Your Engine Bay Available in three stunning finish options—Red powder-coated, Black, and Raw—the SPELAB for 6.7 Dodge Ram intake manifold upgrade allows you to customize the look of your engine bay while improving performance. Whether you're looking for a sleek, subtle look or something that stands out, SPELAB has the right option for you. Experience the Full Potential of Your 2007-2024 6.7L Dodge Ram Engine with SPELAB With the SPELAB 2007-2024 6.7 Dodge Ram intake manifold, you're not just upgrading a component—you're enhancing the entire driving experience. From faster throttle response to improved fuel efficiency, this for Cummins intake manifold upgrade delivers real-world benefits you can feel every time you drive. Unlock the full potential of your Cummins engine and elevate your truck’s performance today. Additionally, the SPELAB 2007-2024 6.7 Dodge Ram intake manifold/Horn is perfectly compatible with our EGR Delete Kit,CCV Delete Kit,Valve Cover,Oil Catch Can ,Intercooler Pipe Kit and Intercooler further unleashing your engine's potential for superior power output when used together. ---tab FAQ--- FAQs Q: Will I need to retune my engine after installing the SPELAB intake manifold?A: No, the SPELAB 2007-2024 6.7 Dodge Ram intake manifold upgrade is designed for a direct fit without requiring additional tuning. Q: Is this intake manifold compatible with my 2019 Dodge Ram 2500?A: Yes, the SPELAB 2007-2024 6.7 Dodge Ram intake manifold is compatible with all Dodge Ram 2500/3500 models from 2007 to 2024. Q: How much horsepower can I expect to gain from this upgrade?A: Depending on your engine’s condition and current modifications, you can expect to see up to 15% more horsepower after installing the SPELAB 2007-2024 6.7 Dodge Ram intake manifold upgrade. Q: How much HP can you get from an intake manifold upgrade?A: The horsepower gains from an intake manifold upgrade can vary, but typically you can expect an increase of 10-20 HP, depending on the specific design and engine tuning. Q: How can I increase the performance of my for 6.7 Dodge Ram?A: You can increase the performance of your 2007-2024 6.7 Dodge Ram by upgrading the intake manifold, adding a performance exhaust system, installing a better turbocharger, and tuning the engine for optimal performance. Q: What are the benefits of upgrading the intake manifold?A: Upgrading the intake manifold improves airflow, increases engine efficiency, enhances throttle response, and can lead to better fuel economy and higher horsepower. Q: Is the SPELAB 2007-2024 6.7 Dodge Ram intake manifold compatible with my stock engine setup?A: Yes, the SPELAB 2007-2024 intake manifold is designed to be compatible with stock engine setups for Dodge Ram 2500/3500 models from 2007 to 2024, making installation straightforward without requiring additional modifications. Q: Do I need to tune my engine after upgrading the intake manifold?A: While tuning can further optimize performance, the SPELAB 2007-2024 6.7 Dodge Ram intake manifold provides noticeable improvements without requiring engine tuning. Q: How does the SPELAB intake manifold improve fuel efficiency?A: The SPELAB intake manifold increases air density and improves combustion efficiency, which can lead to better fuel economy, especially during heavy towing or long-distance driving. Q: Can I install the SPELAB 2007-2024 6.7 Dodge Ram intake manifold myself?A: Yes, the SPELAB intake manifold comes with a complete installation kit, including hardware and instructions, making it suitable for DIY installation. Q: What material is the SPELAB intake manifold made of?A: The SPELAB 2007-2024 6.7 Dodge Ram intake manifold is made from high-quality aluminum alloy, offering superior durability and heat resistance. Q: Does upgrading my intake manifold affect other parts of my engine?A: Upgrading your intake manifold enhances airflow and engine performance without negatively affecting other parts. It’s designed to work seamlessly with stock components. Q: How can I tell if the heater bolts are faulty?A: Look for difficulties during cold starts, such as white smoke or unusual noises. Inspect the bolts for cracks, looseness, or signs of corrosion on the surface. Q: How does the SPELAB 2007-2024 6.7L Dodge Ram intake manifold upgrade prevent heater bolt failure?A: The intake manifold optimizes airflow, improves combustion efficiency, and reduces carbon buildup, thereby lowering the risk of heater bolt damage. Q: Is it safe to completely remove the heater bolts?A: In warmer climates, completely removing the heater bolts will not affect engine starting performance. In colder regions, it is recommended to install spiral heaters and optimize the intake system to ensure smooth engine starts during winter. Q: How can I prevent heater bolt breakage?A: Regularly inspect and use high-quality alloy bolts. SPELAB’s delete plate optimization design fundamentally eliminates the issue of bolt detachment. Q: What are the main advantages of the SPELAB modification?A: It eliminates the risk of heater bolt breakage. By combining spiral heaters, the engine will still start smoothly even under cold conditions. Shop 6.7 cummins intake horn with heater and Explore our complete collection of 6.7 Cummins intake horn to find the perfect upgrade for your truck. { "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [ { "@type": "Question", "name": "Will I need to retune my engine after installing the SPELAB intake manifold?", "acceptedAnswer": { "@type": "Answer", "text": "No, the SPELAB 2007-2024 6.7 Dodge Ram intake manifold upgrade is designed for a direct fit without requiring additional tuning." } }, { "@type": "Question", "name": "Is this intake manifold compatible with my 2019 Dodge Ram 2500?", "acceptedAnswer": { "@type": "Answer", "text": "Yes, the SPELAB 2007-2024 6.7 Dodge Ram intake manifold is compatible with all Dodge Ram 2500/3500 models from 2007 to 2024." } }, { "@type": "Question", "name": "How much horsepower can I expect to gain from this upgrade?", "acceptedAnswer": { "@type": "Answer", "text": "Depending on your engine’s condition and current modifications, you can expect to see up to 15% more horsepower after installing the SPELAB 2007-2024 6.7 Dodge Ram intake manifold upgrade." } }, { "@type": "Question", "name": "How much HP can you get from an intake manifold upgrade?", "acceptedAnswer": { "@type": "Answer", "text": "The horsepower gains from an intake manifold upgrade can vary, but typically you can expect an increase of 10-20 HP, depending on the specific design and engine tuning." } }, { "@type": "Question", "name": "How can I increase the performance of my 6.7 Dodge Ram?", "acceptedAnswer": { "@type": "Answer", "text": "You can increase the performance of your 2007-2024 6.7 Dodge Ram by upgrading the intake manifold, adding a performance exhaust system, installing a better turbocharger, and tuning the engine for optimal performance." } }, { "@type": "Question", "name": "What are the benefits of upgrading the intake manifold?", "acceptedAnswer": { "@type": "Answer", "text": "Upgrading the intake manifold improves airflow, increases engine efficiency, enhances throttle response, and can lead to better fuel economy and higher horsepower." } }, { "@type": "Question", "name": "Is the SPELAB 2007-2024 6.7 Dodge Ram intake manifold compatible with my stock engine setup?", "acceptedAnswer": { "@type": "Answer", "text": "Yes, the SPELAB 2007-2024 intake manifold is designed to be compatible with stock engine setups for Dodge Ram 2500/3500 models from 2007 to 2024, making installation straightforward without requiring additional modifications." } }, { "@type": "Question", "name": "Do I need to tune my engine after upgrading the intake manifold?", "acceptedAnswer": { "@type": "Answer", "text": "While tuning can further optimize performance, the SPELAB 2007-2024 6.7 Dodge Ram intake manifold provides noticeable improvements without requiring engine tuning." } }, { "@type": "Question", "name": "How does the SPELAB intake manifold improve fuel efficiency?", "acceptedAnswer": { "@type": "Answer", "text": "The SPELAB intake manifold increases air density and improves combustion efficiency, which can lead to better fuel economy, especially during heavy towing or long-distance driving." } }, { "@type": "Question", "name": "Can I install the SPELAB 2007-2024 6.7 Dodge Ram intake manifold myself?", "acceptedAnswer": { "@type": "Answer", "text": "Yes, the SPELAB intake manifold comes with a complete installation kit, including hardware and instructions, making it suitable for DIY installation." } }, { "@type": "Question", "name": "What material is the SPELAB intake manifold made of?", "acceptedAnswer": { "@type": "Answer", "text": "The SPELAB 2007-2024 6.7 Dodge Ram intake manifold is made from high-quality aluminum alloy, offering superior durability and heat resistance." } }, { "@type": "Question", "name": "Does upgrading my intake manifold affect other parts of my engine?", "acceptedAnswer": { "@type": "Answer", "text": "Upgrading your intake manifold enhances airflow and engine performance without negatively affecting other parts. It’s designed to work seamlessly with stock components." } }, { "@type": "Question", "name": "How can I tell if the heater bolts are faulty?", "acceptedAnswer": { "@type": "Answer", "text": "Look for difficulties during cold starts, such as white smoke or unusual noises. Inspect the bolts for cracks, looseness, or signs of corrosion on the surface." } }, { "@type": "Question", "name": "How does the SPELAB 2007-2024 6.7L Dodge Ram intake manifold upgrade prevent heater bolt failure?", "acceptedAnswer": { "@type": "Answer", "text": "The intake manifold optimizes airflow, improves combustion efficiency, and reduces carbon buildup, thereby lowering the risk of heater bolt damage." } }, { "@type": "Question", "name": "Is it safe to completely remove the heater bolts?", "acceptedAnswer": { "@type": "Answer", "text": "In warmer climates, completely removing the heater bolts will not affect engine starting performance. In colder regions, it is recommended to install spiral heaters and optimize the intake system to ensure smooth engine starts during winter." } }, { "@type": "Question", "name": "How can I prevent heater bolt breakage?", "acceptedAnswer": { "@type": "Answer", "text": "Regularly inspect and use high-quality alloy bolts. SPELAB’s delete plate optimization design fundamentally eliminates the issue of bolt detachment." } }, { "@type": "Question", "name": "What are the main advantages of the SPELAB modification?", "acceptedAnswer": { "@type": "Answer", "text": "It eliminates the risk of heater bolt breakage. By combining spiral heaters, the engine will still start smoothly even under cold conditions." } } ] } ---tab Blog & Video--- Video Prevent Grid Heater Failure: SPELAB Intake Manifold & Delete Install Learn how to prevent grid heater failure by installing a SPELAB intake manifold, EGR delete, and exhaust on a 2007-2024 6.7 Dodge Ram. Failure PreventionInstallation Guide Avoid Engine Failure: Grid Heater Delete & SPELAB Intake Horn Upgrade Discover how to prevent engine failure with a grid heater delete and SPELAB intake horn upgrade for improved airflow and performance. Failure Prevention Installation Guide Engine Protection Resolve Failing Bolt Issues: SPELAB Intake Horn Install & Grid Heater Delete Watch the installation of a SPELAB intake manifold and grid heater delete, addressing common failing bolt issues that can lead to engine failure. Troubleshooting Guide Installation Guide Engine Repair Fix Failing Bolt: 6.7 Dodge Ram Grid Heater Delete to Prevent Engine Failure Learn to prevent 6.7 Dodge Ram grid heater failing bolt issues and subsequent engine failure with this detailed installation guide. Repair Guide Failure Prevention Boost Performance: Improve Airflow with 6.7 Dodge Ram Upgrades See how installing a grid heater delete, EGR delete, and intake manifold significantly improves airflow and prevents 6.7 Dodge Ram engine issues. Installation Guide Airflow Improvement Compare Performance: Stock vs. SPELAB Intake Horn Join a two-week road trip comparing a stock intake horn with the SPELAB version, alongside truck builds and car shows. Comparison Video Review ×

---tab Description--- Description The Factory Plastic Will Fail. It’s Not a Matter of "If," But "When." If you drive a 6.7L Powerstroke, you are likely driving with a known weak link: the OEM plastic intake manifold and intercooler pipes. Over time, heat cycles and high boost pressure cause these plastic components to crack, warp, or burst completely—often leaving you stranded in "limp mode" while towing or under heavy load. Eliminate the Weak Links with the SPELAB Intake Manifold with Intercooler Pipe Bundle. We have combined our top-tier airflow upgrades into one convenient, high-performance package. By upgrading the manifold and piping simultaneously, you ensure your engine can breathe freely, handle higher boost, and deliver consistent power without the fear of a plastic blowout. Choose Your Level of Protection: Option 1 (Essential Protection): Intake Manifold + Cold Side Pipe. Replaces the two most common failure points. Option 2 (Maximum Performance): Intake Manifold + Full Intercooler Piping (Cold & Hot Side). Replaces the entire airflow loop for maximum flow and thermal efficiency. Fitment 2011–2019 Ford F-250 / F-350 Super Duty 6.7L Powerstroke. 2015–2016 kits include an external oil feed line in the package and require replacing the factory oil feed routing as supplied. Key Features Cast Aluminum ManifoldReplaces the fragile OEM plastic manifold with heat-treated cast aluminum, designed to handle extreme boost pressures without cracking or deforming. 3.5" Mandrel-Bent TubingIncreases airflow volume significantly compared to stock, reducing turbulence and allowing for faster turbo spool-up and lower EGTs (Exhaust Gas Temperatures). Burst-Proof ReliabilityThe included Cold Side Pipe eliminates the notorious factory plastic pipe failure, utilizing polished aluminum and reinforced silicone couplers to ensure you stay on the road. Streamlined Engine BayRemoving the bulky factory components cleans up the engine bay, providing better access for maintenance and a professional, custom appearance. Optimized Flow DynamicsThe manifold features a "bridge" design that distributes air evenly to all cylinders, improving combustion efficiency and throttle response. Leak-Free ConnectionsIncludes heavy-duty 5-ply silicone boots and stainless steel T-bolt clamps that provide a vice-like grip, preventing blown boots even under high-performance tuning conditions. UNLOCK TRUE POTENTIAL: The "Clean Air" Synergy Prevents Carbon Clogging (With EGR Delete):When paired with an EGR Delete, this High-Flow Manifold stays permanently clean. Unlike stock manifolds that get choked by recycled exhaust soot, our aluminum design maintains 100% flow capacity for the life of the truck when the EGR is removed. Shop EGR Delete Kit. Eliminates Oil Sludge (With CCV Reroute):Factory trucks route oily crankcase vapors back into the intake. By adding a CCV Reroute to this bundle, you ensure that your shiny new Intercooler Pipes and Manifold remain free of sticky oil sludge, guaranteeing maximum thermal transfer and airflow efficiency. Shop CCV Delete Kit. The Result:Cleaner Engine + Cooler Air = More Horsepower & Longevity. This bundle is the foundational hardware you need to build a reliable, high-performance 6.7L Powerstroke. Specifications Manifold Material Cast Aluminum Inlet Diameter 3.5 inches Pipe Material Mandrel-Bent Polished Aluminum Coupler Material 5-Ply Reinforced Silicone Clamps Stainless Steel T-Bolt Installation Notice: The Silicone Boot and intake manifold have a tight fit. For easier installation, we suggest putting the clamp on the Silicone Boot first, then attaching the boot to the intake manifold before installing the completed assembly in your vehicle. SPELAB Intake Manifold For 2011-2019 Ford 6.7L Powerstroke ---tab FAQ--- FAQs Q: What is the difference between the "Cold Side" and "Full Kit" options?A: The Cold Side option replaces the pipe going from the intercooler to the engine intake—this is the most critical upgrade as the stock plastic pipe often bursts. The Full Kit adds the Hot Side pipe (Turbo to Intercooler), which replaces the restrictive factory resonator pipe for even better sound and flow. Q: Will this fit my 2017 or 2018 Powerstroke?A: No. While the manifold fits 2011-2019, the intercooler piping layout changed in 2017. This specific bundle is designed for the 2011-2016 model years. Q: Do I have to remove the EGR system to install this manifold?A: Yes. The SPELAB High-Flow Manifold is designed to replace the factory unit and does not have provisions for the factory EGR cooler. An EGR delete kit and appropriate tuning are required. Q: Is it hard to install?A: This is an advanced installation involving fuel lines and turbo piping. We highly recommend having a certified diesel mechanic perform the installation. Q: Why aluminum instead of plastic?A: Aluminum handles heat cycles and boost pressure significantly better than plastic. It won't become brittle over time, ensuring your truck remains reliable for years to come. ---tab Shipping & Returns--- Fast Shipping Policy Your order will be dispatched within 1-2 business days, and the package will arrive within your order's estimated date. Click for Shipping Policy Easy Return Policy Every order comes with a 14-day free return, which means you don't have to pay for a return slip. Click for Return Policy

---tab Description--- Description The SPELAB 2007-2024 6.7L Dodge Ram Intake Manifold/Horn enhances performance for 2007-2024 6.7L Dodge Ram engines with improved airflow and durability. Compatible with our EGR Delete Kit, it offers easy installation and performance whether or not the EGR is deleted. Designed with heating element provisions, you can seal the ports in warm weather or install them in colder conditions. Available in black, silver, and red, it delivers reliable performance and customization for your engine. Key Features Hassle-Free Installation: Designed for a direct fit with stock mounting points, ensuring a hassle-free installation. This upgrade doesn't require any additional tuning or modifications. Enhanced Airflow Design: Featuring a more prominent SPELAB logo, the intake manifold provides increased internal space, improving air intake for better engine performance. Precision Fit: The top cover design is expertly crafted to integrate seamlessly with the SPELAB EGR Plate, ensuring a snug fit and optimized performance. 45-Degree Sensor Port: The manifold includes a new 45-degree angled sensor connector located at the front, allowing for easy access and precise sensor installation. Advanced Stud Design: Our unique stud design extends to the exterior of the intake cylinder block with a sophisticated three-dimensional concave structure, ensuring a secure and efficient installation. Sensor & Boost-Ready: Features four 1/8” NPT threaded ports, easily install boost gauges, sensors, or other performance add-ons. Compact and Efficient: The manifold’s smaller bend angle and near 180-degree parallel alignment reduce airflow restriction, while the lower overall height enhances under-hood clearance and airflow dynamics. Enhanced Airflow with SPELAB 2007-2024 6.7 Dodge Ram Intake Manifold Upgrade The SPELAB 2007-2024 6.7 Dodge Ram intake horn is engineered to significantly increase airflow into your engine. It features a larger, unrestricted design compared to the stock intake manifold, allowing for more oxygen-rich air to reach the engine cylinders. This not only improves combustion but also boosts overall performance. In fact, this upgrade delivers an impressive 88% increase in airflow, ensuring that your engine operates at peak efficiency. 2X OEM Diameter For Dodge Ram engine requires substantial airflow, but the restrictive OEM air intake limits performance. SPELAB’s larger, high-flow intake horn—double the size of the OEM—eliminates airflow restrictions and prevents boost loss, allowing for smooth, unrestricted air delivery. Boost Performance and Fuel Efficiency The SPELAB 2007-2024 6.7 Dodge Ram High-Flow Intake Manifold/Trumpet is designed to enhance engine air intake efficiency. Its streamlined, unobstructed structure significantly increases airflow, boosting engine performance. Unlike the factory heat shields, which are prone to carbon buildup and blockage over time, SPELAB’s innovative use of heating elements replaces traditional heating methods, effectively preventing blockages while maintaining optimal performance. This product is the ideal choice for improving engine power and reliability. Specifications Material Cast Aluminum Alloy Weight 4.2 kg (9.26 lbs) Package Dimensions 37 × 27 × 24.5 cm (14.6 × 10.6 × 9.6 inches) Manifold Inlet Size 3-3/8 inch Installation Type Direct Bolt-On (No Modifications Required) Ports Included 4 × 1/8" NPT Threaded Ports Heating Element Included No (Heating element must be purchased separately if needed.) Tuning Requirement Not Required Fuel System Compatibility Fully compatible with OEM fuel lines & emission equipment Heating Element Usage The heating element is optional and only necessary when operating in temperatures below 0°C (32°F). Fitment 2007-2024 6.7 Dodge Ram intake manifold/Horn: Dodge Ram 2500/3500 6.7L Diesel Intake manifold kit for chassis cab: 2013-2018 Dodge Ram 3500-5500 6.7L Chassis-Cab Only (Also Fits Dual-Alternator Engines) Grid Heater Delete Plate: 2007-2024 Dodge Ram 2500/3500 6.7L Dodge Ram Diesel Installation SPELAB Intake Manifold For 2013-2024 6.7L Dodge Ram ---tab Why SPELAB--- Benefits of Upgrading to SPELAB 2007-2024 6.7 Dodge Ram Intake Manifold Increased Air Density and Boost Efficiency This 2007-2024 6.7 Dodge Ram intake manifold upgrade increases air density by improving airflow to the cylinders, leading to more efficient combustion and higher boost efficiency. With its unique design, the SPELAB manifold allows your engine to handle higher boost levels without adding stress to the turbine, ensuring smoother, more reliable performance. This means better performance for towing, off-roading, or high-speed driving. Faster Throttle Response and Better Combustion The SPELAB 2007-2024 6.7 Dodge Ram intake manifold upgrade also helps deliver faster throttle response by allowing more air into the engine quicker. This provides more immediate power delivery, making your truck feel more responsive and easier to control, whether you're accelerating on the highway or navigating tough off-road conditions. Easy Installation and Compatibility with for 6.7 Dodge Ram Hassle-Free Installation The SPELAB 2007-2024 6.7 Dodge Ram intake manifold upgrade is designed for a direct fit with stock mounting points, ensuring a hassle-free installation. This upgrade doesn't require any additional tuning or modifications. The package includes all necessary hardware, such as paper gaskets, washers, bolts, and a proprietary fuel line, ensuring a smooth and seamless installation process. Stock Compatibility This for Dodge Ram intake manifold upgrade is fully compatible with your engine’s existing components, ensuring a seamless fit without requiring any additional modifications. It also comes with a robust 3-3/8 inch inlet and four 1/8 inch NPT ports, allowing for flexible sensor integration and easy customization to suit your specific performance needs. SPELAB Intake Manifold Upgrade Materials and Options Durable Aluminum Alloy Construction The SPELAB 2007-2024 6.7 Dodge Ram intake manifold is crafted from high-grade aluminum alloy, offering superior durability and heat resistance. This ensures that the manifold can withstand the rigors of high-performance driving while maintaining consistent performance, even under extreme conditions. Finish Options to Match Your Engine Bay Available in three stunning finish options—Red powder-coated, Black, and Raw—the SPELAB for 6.7 Dodge Ram intake manifold upgrade allows you to customize the look of your engine bay while improving performance. Whether you're looking for a sleek, subtle look or something that stands out, SPELAB has the right option for you. Experience the Full Potential of Your 2007-2024 6.7L Dodge Ram Engine with SPELAB With the SPELAB 2007-2024 6.7 Dodge Ram intake manifold, you're not just upgrading a component—you're enhancing the entire driving experience. From faster throttle response to improved fuel efficiency, this for Cummins intake manifold upgrade delivers real-world benefits you can feel every time you drive. Unlock the full potential of your Cummins engine and elevate your truck’s performance today. Additionally, the SPELAB 2007-2024 6.7 Dodge Ram intake manifold/Horn is perfectly compatible with our EGR Delete Kit,CCV Delete Kit,Valve Cover,Oil Catch Can ,Intercooler Pipe Kit and Intercooler further unleashing your engine's potential for superior power output when used together. ---tab FAQ--- FAQs Q: Will I need to retune my engine after installing the SPELAB intake manifold?A: No, the SPELAB 2007-2024 6.7 Dodge Ram intake manifold upgrade is designed for a direct fit without requiring additional tuning. Q: Is this intake manifold compatible with my 2019 Dodge Ram 2500?A: Yes, the SPELAB 2007-2024 6.7 Dodge Ram intake manifold is compatible with all Dodge Ram 2500/3500 models from 2007 to 2024. Q: How much horsepower can I expect to gain from this upgrade?A: Depending on your engine’s condition and current modifications, you can expect to see up to 15% more horsepower after installing the SPELAB 2007-2024 6.7 Dodge Ram intake manifold upgrade. Q: How much HP can you get from an intake manifold upgrade?A: The horsepower gains from an intake manifold upgrade can vary, but typically you can expect an increase of 10-20 HP, depending on the specific design and engine tuning. Q: How can I increase the performance of my for 6.7 Dodge Ram?A: You can increase the performance of your 2007-2024 6.7 Dodge Ram by upgrading the intake manifold, adding a performance exhaust system, installing a better turbocharger, and tuning the engine for optimal performance. Q: What are the benefits of upgrading the intake manifold?A: Upgrading the intake manifold improves airflow, increases engine efficiency, enhances throttle response, and can lead to better fuel economy and higher horsepower. Q: Is the SPELAB 2007-2024 6.7 Dodge Ram intake manifold compatible with my stock engine setup?A: Yes, the SPELAB 2007-2024 intake manifold is designed to be compatible with stock engine setups for Dodge Ram 2500/3500 models from 2007 to 2024, making installation straightforward without requiring additional modifications. Q: Do I need to tune my engine after upgrading the intake manifold?A: While tuning can further optimize performance, the SPELAB 2007-2024 6.7 Dodge Ram intake manifold provides noticeable improvements without requiring engine tuning. Q: How does the SPELAB intake manifold improve fuel efficiency?A: The SPELAB intake manifold increases air density and improves combustion efficiency, which can lead to better fuel economy, especially during heavy towing or long-distance driving. Q: Can I install the SPELAB 2007-2024 6.7 Dodge Ram intake manifold myself?A: Yes, the SPELAB intake manifold comes with a complete installation kit, including hardware and instructions, making it suitable for DIY installation. Q: What material is the SPELAB intake manifold made of?A: The SPELAB 2007-2024 6.7 Dodge Ram intake manifold is made from high-quality aluminum alloy, offering superior durability and heat resistance. Q: Does upgrading my intake manifold affect other parts of my engine?A: Upgrading your intake manifold enhances airflow and engine performance without negatively affecting other parts. It’s designed to work seamlessly with stock components. Q: How can I tell if the heater bolts are faulty?A: Look for difficulties during cold starts, such as white smoke or unusual noises. Inspect the bolts for cracks, looseness, or signs of corrosion on the surface. Q: How does the SPELAB 2007-2024 6.7L Dodge Ram intake manifold upgrade prevent heater bolt failure?A: The intake manifold optimizes airflow, improves combustion efficiency, and reduces carbon buildup, thereby lowering the risk of heater bolt damage. Q: Is it safe to completely remove the heater bolts?A: In warmer climates, completely removing the heater bolts will not affect engine starting performance. In colder regions, it is recommended to install spiral heaters and optimize the intake system to ensure smooth engine starts during winter. Q: How can I prevent heater bolt breakage?A: Regularly inspect and use high-quality alloy bolts. SPELAB’s delete plate optimization design fundamentally eliminates the issue of bolt detachment. Q: What are the main advantages of the SPELAB modification?A: It eliminates the risk of heater bolt breakage. By combining spiral heaters, the engine will still start smoothly even under cold conditions. Shop 6.7 cummins intake horn with heater and Explore our complete collection of 6.7 Cummins intake horn to find the perfect upgrade for your truck. { "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [ { "@type": "Question", "name": "Will I need to retune my engine after installing the SPELAB intake manifold?", "acceptedAnswer": { "@type": "Answer", "text": "No, the SPELAB 2007-2024 6.7 Dodge Ram intake manifold upgrade is designed for a direct fit without requiring additional tuning." } }, { "@type": "Question", "name": "Is this intake manifold compatible with my 2019 Dodge Ram 2500?", "acceptedAnswer": { "@type": "Answer", "text": "Yes, the SPELAB 2007-2024 6.7 Dodge Ram intake manifold is compatible with all Dodge Ram 2500/3500 models from 2007 to 2024." } }, { "@type": "Question", "name": "How much horsepower can I expect to gain from this upgrade?", "acceptedAnswer": { "@type": "Answer", "text": "Depending on your engine’s condition and current modifications, you can expect to see up to 15% more horsepower after installing the SPELAB 2007-2024 6.7 Dodge Ram intake manifold upgrade." } }, { "@type": "Question", "name": "How much HP can you get from an intake manifold upgrade?", "acceptedAnswer": { "@type": "Answer", "text": "The horsepower gains from an intake manifold upgrade can vary, but typically you can expect an increase of 10-20 HP, depending on the specific design and engine tuning." } }, { "@type": "Question", "name": "How can I increase the performance of my 6.7 Dodge Ram?", "acceptedAnswer": { "@type": "Answer", "text": "You can increase the performance of your 2007-2024 6.7 Dodge Ram by upgrading the intake manifold, adding a performance exhaust system, installing a better turbocharger, and tuning the engine for optimal performance." } }, { "@type": "Question", "name": "What are the benefits of upgrading the intake manifold?", "acceptedAnswer": { "@type": "Answer", "text": "Upgrading the intake manifold improves airflow, increases engine efficiency, enhances throttle response, and can lead to better fuel economy and higher horsepower." } }, { "@type": "Question", "name": "Is the SPELAB 2007-2024 6.7 Dodge Ram intake manifold compatible with my stock engine setup?", "acceptedAnswer": { "@type": "Answer", "text": "Yes, the SPELAB 2007-2024 intake manifold is designed to be compatible with stock engine setups for Dodge Ram 2500/3500 models from 2007 to 2024, making installation straightforward without requiring additional modifications." } }, { "@type": "Question", "name": "Do I need to tune my engine after upgrading the intake manifold?", "acceptedAnswer": { "@type": "Answer", "text": "While tuning can further optimize performance, the SPELAB 2007-2024 6.7 Dodge Ram intake manifold provides noticeable improvements without requiring engine tuning." } }, { "@type": "Question", "name": "How does the SPELAB intake manifold improve fuel efficiency?", "acceptedAnswer": { "@type": "Answer", "text": "The SPELAB intake manifold increases air density and improves combustion efficiency, which can lead to better fuel economy, especially during heavy towing or long-distance driving." } }, { "@type": "Question", "name": "Can I install the SPELAB 2007-2024 6.7 Dodge Ram intake manifold myself?", "acceptedAnswer": { "@type": "Answer", "text": "Yes, the SPELAB intake manifold comes with a complete installation kit, including hardware and instructions, making it suitable for DIY installation." } }, { "@type": "Question", "name": "What material is the SPELAB intake manifold made of?", "acceptedAnswer": { "@type": "Answer", "text": "The SPELAB 2007-2024 6.7 Dodge Ram intake manifold is made from high-quality aluminum alloy, offering superior durability and heat resistance." } }, { "@type": "Question", "name": "Does upgrading my intake manifold affect other parts of my engine?", "acceptedAnswer": { "@type": "Answer", "text": "Upgrading your intake manifold enhances airflow and engine performance without negatively affecting other parts. It’s designed to work seamlessly with stock components." } }, { "@type": "Question", "name": "How can I tell if the heater bolts are faulty?", "acceptedAnswer": { "@type": "Answer", "text": "Look for difficulties during cold starts, such as white smoke or unusual noises. Inspect the bolts for cracks, looseness, or signs of corrosion on the surface." } }, { "@type": "Question", "name": "How does the SPELAB 2007-2024 6.7L Dodge Ram intake manifold upgrade prevent heater bolt failure?", "acceptedAnswer": { "@type": "Answer", "text": "The intake manifold optimizes airflow, improves combustion efficiency, and reduces carbon buildup, thereby lowering the risk of heater bolt damage." } }, { "@type": "Question", "name": "Is it safe to completely remove the heater bolts?", "acceptedAnswer": { "@type": "Answer", "text": "In warmer climates, completely removing the heater bolts will not affect engine starting performance. In colder regions, it is recommended to install spiral heaters and optimize the intake system to ensure smooth engine starts during winter." } }, { "@type": "Question", "name": "How can I prevent heater bolt breakage?", "acceptedAnswer": { "@type": "Answer", "text": "Regularly inspect and use high-quality alloy bolts. SPELAB’s delete plate optimization design fundamentally eliminates the issue of bolt detachment." } }, { "@type": "Question", "name": "What are the main advantages of the SPELAB modification?", "acceptedAnswer": { "@type": "Answer", "text": "It eliminates the risk of heater bolt breakage. By combining spiral heaters, the engine will still start smoothly even under cold conditions." } } ] } ---tab Blog & Video--- Video Prevent Grid Heater Failure: SPELAB Intake Manifold & Delete Install Learn how to prevent grid heater failure by installing a SPELAB intake manifold, EGR delete, and exhaust on a 2007-2024 6.7 Dodge Ram. Failure PreventionInstallation Guide Avoid Engine Failure: Grid Heater Delete & SPELAB Intake Horn Upgrade Discover how to prevent engine failure with a grid heater delete and SPELAB intake horn upgrade for improved airflow and performance. Failure Prevention Installation Guide Engine Protection Resolve Failing Bolt Issues: SPELAB Intake Horn Install & Grid Heater Delete Watch the installation of a SPELAB intake manifold and grid heater delete, addressing common failing bolt issues that can lead to engine failure. Troubleshooting Guide Installation Guide Engine Repair Fix Failing Bolt: 6.7 Dodge Ram Grid Heater Delete to Prevent Engine Failure Learn to prevent 6.7 Dodge Ram grid heater failing bolt issues and subsequent engine failure with this detailed installation guide. Repair Guide Failure Prevention Boost Performance: Improve Airflow with 6.7 Dodge Ram Upgrades See how installing a grid heater delete, EGR delete, and intake manifold significantly improves airflow and prevents 6.7 Dodge Ram engine issues. Installation Guide Airflow Improvement Compare Performance: Stock vs. SPELAB Intake Horn Join a two-week road trip comparing a stock intake horn with the SPELAB version, alongside truck builds and car shows. Comparison Video Review ×

Intake Manifold 300-137 For Single Plane EFI - GM LS1/LS2/LS6 With Fuel Rail Kits | SPELAB Single Plane EFI LS Intake Manifold. All GM LS Gen III or IV engines equipped with LS1/LS2/LS6 style cathedral port cylinder heads. This Kit Contains: Intake Manifold Mounting Hardware As shown in Second picture above Features: Product Type: Intake Manifold Material: Aluminum Finish: Satin Manifold Type: Single Plane Fuel System Type: ЕFI Front Height: 5.417 inch Rear Height: 5.417 inch Port Size: 2.50" H x 1.15" W Recommended Use: Forced Induction RPM Power Band: 2500-7000 RPM 4150 Square bore flange Interchange Part Number : 300-137 Fitment: GM LS1/LS2/LS6 Note: 100% brand new, Never been tried or installed. No instructions are supplied.Please consult with a qualified mechanic before attempting installation! FAQs Q1: Which vehicles are compatible with this intake manifold?A1: This intake manifold is compatible with GM LS1, LS2, and LS6 engines, typically found in the Chevrolet Corvette, Camaro, Pontiac GTO, and Silverado 1500. Q2: What type of intake manifold is this?A2: It is a single-plane EFI intake manifold designed for high-performance applications. Q3: What material is this intake manifold made of?A3: It is made from high-quality aluminum, offering strength and lightweight properties. Q4: Does this intake manifold come with gaskets?A4: No, gaskets are sold separately. Q5: What fuel system is this intake manifold compatible with?A5: This manifold is designed for EFI (Electronic Fuel Injection) systems. Q6: What RPM range can this intake manifold handle?A6: It supports a high-performance RPM range up to 7,500 RPM. Q7: Can this intake manifold be used with a carburetor?A7: No, it is specifically designed for EFI systems and is not compatible with carburetors. Q8: Is this intake manifold compatible with forced induction?A8: Yes, it is compatible with superchargers and turbochargers. Q9: How should this intake manifold be installed?A9: Installation requires standard hand tools and EFI knowledge; professional installation is recommended. Q10: What gaskets are recommended for this intake manifold?A10: It is recommended to use intake gaskets from reputable brands like Fel-Pro. { "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [ { "@type": "Question", "name": "Which vehicles are compatible with this intake manifold?", "acceptedAnswer": { "@type": "Answer", "text": "This intake manifold is compatible with GM LS1, LS2, and LS6 engines, typically found in the Chevrolet Corvette, Camaro, Pontiac GTO, and Silverado 1500." } }, { "@type": "Question", "name": "What type of intake manifold is this?", "acceptedAnswer": { "@type": "Answer", "text": "It is a single-plane EFI intake manifold designed for high-performance applications." } }, { "@type": "Question", "name": "What material is this intake manifold made of?", "acceptedAnswer": { "@type": "Answer", "text": "It is made from high-quality aluminum, offering strength and lightweight properties." } }, { "@type": "Question", "name": "Does this intake manifold come with gaskets?", "acceptedAnswer": { "@type": "Answer", "text": "No, gaskets are sold separately." } }, { "@type": "Question", "name": "What fuel system is this intake manifold compatible with?", "acceptedAnswer": { "@type": "Answer", "text": "This manifold is designed for EFI (Electronic Fuel Injection) systems." } }, { "@type": "Question", "name": "What RPM range can this intake manifold handle?", "acceptedAnswer": { "@type": "Answer", "text": "It supports a high-performance RPM range up to 7,500 RPM." } }, { "@type": "Question", "name": "Can this intake manifold be used with a carburetor?", "acceptedAnswer": { "@type": "Answer", "text": "No, it is specifically designed for EFI systems and is not compatible with carburetors." } }, { "@type": "Question", "name": "Is this intake manifold compatible with forced induction?", "acceptedAnswer": { "@type": "Answer", "text": "Yes, it is compatible with superchargers and turbochargers." } }, { "@type": "Question", "name": "How should this intake manifold be installed?", "acceptedAnswer": { "@type": "Answer", "text": "Installation requires standard hand tools and EFI knowledge; professional installation is recommended." } }, { "@type": "Question", "name": "What gaskets are recommended for this intake manifold?", "acceptedAnswer": { "@type": "Answer", "text": "It is recommended to use intake gaskets from reputable brands like Fel-Pro." } } ] }

---tab Description--- Description Unlock the full potential of your 2009–2024 Dodge Ram 2500/3500 6.7L with the SPELAB Performance Package — combining the EGR Delete Kit and High-Flow Intake Manifold. Designed for performance enthusiasts, this upgrade delivers enhanced airflow, improved engine efficiency, and unmatched durability. With precision-engineered components like the CNC-machined intake block plate, integrated DDC bracket, and oversized intake horn, you’ll experience faster throttle response, cooler engine temperatures, and superior fuel economy — all while giving your engine bay a premium, polished look. Perfect for drivers who demand the best from their trucks, whether on the highway, job site, or off-road. Kit Includes: SPELAB Intake Manifold/Horn SPELAB Grid Heater Delete SPELAB EGR Delete Kit SPELAB EGR Throttle Valve Delete Fitment: 2009-2024 Dodge Ram 2500/3500 6.7L Diesel. Not compatible with Cab & Chassis (C&C) models. Key Features: Integrated DDC Base Pipe Bracket: Directly mounts onto the engine without the need for exhaust studs, simplifying installation and enhancing durability. CNC-Machined Aluminum Intake Block Plate: Features a polished finish and engraved logo, combining durability with a premium aesthetic in your engine bay. Oversized High-Flow Intake Manifold: 88% increased airflow over stock, delivering more oxygen to the cylinders for better combustion and power. Optimized Airflow & Boost Efficiency: Reduces pressure drop and prevents boost loss, improving engine response under load. 45-Degree Angled Sensor Port: Allows for easier sensor installation and maintenance thanks to the new forward-facing, angled sensor connector. Advanced Stud and Compact Design: Three-dimensional concave stud structure ensures secure mounting, while the near 180-degree bend reduces restrictions and improves under-hood clearance. Boosted Performance and Fuel Efficiency: Removes EGR restrictions and maximizes air intake, delivering faster throttle response, better fuel economy, and more consistent performance, whether towing, off-roading, or daily driving. Durable Aluminum Construction with Finish Options: Crafted from premium aluminum alloy, available in Red powder-coated, Black, or Raw finishes to match your engine bay’s look. Specifications: Application EGR Delete + High-Flow Intake Manifold Kit for 6.7L Dodge Ram Materials CNC-machined aluminum (EGR block plate), cast aluminum alloy (intake manifold) Manifold Inlet Size 3-3/8 inch Sensor Ports Four 1/8 inch NPT ports for flexible integration Installation SPELAB Intake Manifold For 2013-2018 6.7L Dodge Ram SPELAB EGR Delete Kit For 2009-2024 6.7L Dodge Ram ---tab FAQ--- FAQs Q: What makes the SPELAB EGR Delete Kit unique?A: The SPELAB EGR Delete Kit features a custom CNC-machined aluminum intake block plate with a sleek polished finish and an exclusive engraved logo. Its unique design not only enhances functionality but also makes it a collectible-grade accessory for diesel enthusiasts. Q: Why is the model year compatibility listed as 2009-2024 instead of 2009.5-2024?A: To prevent any confusion for customers, the compatibility range was simplified to 2009-2024. This ensures accuracy, as the kit is specifically designed to fit 2009+ Ram 2500/3500 models with the 6.7L Dodge Ram engine. It is not suitable for Cab & Chassis (C&C) models. Q: How does the DDC bracket improve installation?A: The integrated DDC base pipe bracket eliminates the need for exhaust studs, making the installation process faster and more straightforward. This innovative feature ensures a precise and secure fit, saving time and effort. Q: Is this EGR Delete Kit designed to work with other SPELAB products?A: Yes, this kit is specifically engineered to perfectly complement SPELAB’s 6.7 Dodge Ram intake manifold. Together, they deliver optimal performance, durability, and a seamless upgrade experience for your engine bay. Q: Can the SPELAB EGR Delete Kit enhance the aesthetics of my engine bay?A: Absolutely! The polished CNC-machined aluminum block plate with its engraved logo not only provides superior durability but also adds a premium, upgraded look to your engine bay, setting your vehicle apart. Q: Will I need to retune my engine after installing the SPELAB intake manifold?A: No, the SPELAB for 6.7 Dodge Ram intake manifold upgrade is designed for a direct fit without requiring additional tuning. Q: Is this intake manifold compatible with my 2019 Dodge Ram 2500?A: Yes, the SPELAB for 6.7 Dodge Ram intake manifold is compatible with all Dodge Ram 2500/3500 models from 2007 to 2024. Q: How much horsepower can I expect to gain from this upgrade?A: Depending on your engine’s condition and current modifications, you can expect to see up to 15% more horsepower after installing the SPELAB for 6.7 Dodge Ram intake manifold upgrade. Q: How much HP can you get from an intake manifold upgrade?A: The horsepower gains from an intake manifold upgrade can vary, but typically you can expect an increase of 10-20 HP, depending on the specific design and engine tuning. Q: How can I increase the performance of my for 6.7 Dodge Ram?A: You can increase the performance of your for 6.7 Dodge Ram by upgrading the intake manifold, adding a performance exhaust system, installing a better turbocharger, and tuning the engine for optimal performance. Q: What are the benefits of upgrading the intake manifold?A: Upgrading the intake manifold improves airflow, increases engine efficiency, enhances throttle response, and can lead to better fuel economy and higher horsepower. Q: Is the SPELAB for 6.7 Dodge Ram intake manifold compatible with my stock engine setup?A: Yes, the SPELAB intake manifold is designed to be compatible with stock engine setups for Dodge Ram 2500/3500 models from 2007 to 2024, making installation straightforward without requiring additional modifications. Q: Do I need to tune my engine after upgrading the intake manifold?A: While tuning can further optimize performance, the SPELAB for 6.7 Dodge Ram intake manifold provides noticeable improvements without requiring engine tuning. Q: How does the SPELAB intake manifold improve fuel efficiency?A: The SPELAB intake manifold increases air density and improves combustion efficiency, which can lead to better fuel economy, especially during heavy towing or long-distance driving. Q: Can I install the SPELAB for 6.7 Dodge Ram intake manifold myself?A: Yes, the SPELAB intake manifold comes with a complete installation kit, including hardware and instructions, making it suitable for DIY installation. Q: What material is the SPELAB intake manifold made of?A: The SPELAB for 6.7 Dodge Ram intake manifold is made from high-quality aluminum alloy, offering superior durability and heat resistance. Q: Does upgrading my intake manifold affect other parts of my engine?A: Upgrading your intake manifold enhances airflow and engine performance without negatively affecting other parts. It’s designed to work seamlessly with stock components. Q: How can I tell if the heater bolts are faulty?A: Look for difficulties during cold starts, such as white smoke or unusual noises. Inspect the bolts for cracks, looseness, or signs of corrosion on the surface. Q: How does the SPELAB 6.7L Dodge Ram intake manifold upgrade prevent heater bolt failure?A: The intake manifold optimizes airflow, improves combustion efficiency, and reduces carbon buildup, thereby lowering the risk of heater bolt damage. Q: Is it safe to completely remove the heater bolts?A: In warmer climates, completely removing the heater bolts will not affect engine starting performance. In colder regions, it is recommended to install spiral heaters and optimize the intake system to ensure smooth engine starts during winter. Q: How can I prevent heater bolt breakage?A: Regularly inspect and use high-quality alloy bolts. SPELAB’s delete plate optimization design fundamentally eliminates the issue of bolt detachment. Q: What are the main advantages of the SPELAB modification?A: It eliminates the risk of heater bolt breakage. By combining spiral heaters, the engine will still start smoothly even under cold conditions. ---tab Shipping & Returns--- Fast Shipping Policy Your order will be dispatched within 1-2 business days, and the package will arrive within your order's estimated date. Click for Shipping Policy Easy Return Policy Every order comes with a 14-day free return, which means you don't have to pay for a return slip. Click for Return Policy ---tab Blog & Video--- Video 6.7 Dodge Ram: Full Performance Mod Install! Watch a detailed, step-by-step installation of SPELAB parts on a 6.7 Dodge Ram truck. Upgrade its performance, sound, and reliability. Before & After Review Sound Test See How It's Done: 6.7 Dodge Ram Performance Installation Watch this 6.7 Dodge Ram truck transform with intake, exhaust, EGR, and grid heater delete installs. See the massive performance boost! Installation Guide Before & After Review See the Installation: SPELAB Intake Horn & Grid Heater Delete Watch the detailed process of installing an SPELAB intake horn and grid heater delete on a 6.7 Dodge Ram, including a product review. Installation Guide Review Performance Upgrade See the Upgrade: SPELAB RAM 2500 Dodge Ram Intake Horn Installation Discover the amazing results of installing a SPELAB intake horn on a RAM 2500 Dodge Ram. This video includes installation tips and a review! Installation Guide Review Discover the Difference: Dodge Ram Engine Power Improvements Explore how this Dodge Ram engine's power is dramatically improved with an EGR delete, grid heater delete, and new intake manifold. Performance Showcase Review × { "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [ { "@type": "Question", "name": "What makes the SPELAB EGR Delete Kit unique?", "acceptedAnswer": { "@type": "Answer", "text": "The SPELAB EGR Delete Kit features a custom CNC-machined aluminum intake block plate with a sleek polished finish and an exclusive engraved logo. Its unique design not only enhances functionality but also makes it a collectible-grade accessory for diesel enthusiasts." } }, { "@type": "Question", "name": "Why is the model year compatibility listed as 2009-2024 instead of 2009.5-2024?", "acceptedAnswer": { "@type": "Answer", "text": "To prevent any confusion for customers, the compatibility range was simplified to 2009-2024. This ensures accuracy, as the kit is specifically designed to fit 2009+ Ram 2500/3500 models with the 6.7L Dodge Ram engine. It is not suitable for Cab & Chassis (C&C) models." } }, { "@type": "Question", "name": "How does the DDC bracket improve installation?", "acceptedAnswer": { "@type": "Answer", "text": "The integrated DDC base pipe bracket eliminates the need for exhaust studs, making the installation process faster and more straightforward. This innovative feature ensures a precise and secure fit, saving time and effort." } }, { "@type": "Question", "name": "Is this EGR Delete Kit designed to work with other SPELAB products?", "acceptedAnswer": { "@type": "Answer", "text": "Yes, this kit is specifically engineered to perfectly complement SPELAB’s 6.7 Dodge Ram intake manifold. Together, they deliver optimal performance, durability, and a seamless upgrade experience for your engine bay." } }, { "@type": "Question", "name": "Can the SPELAB EGR Delete Kit enhance the aesthetics of my engine bay?", "acceptedAnswer": { "@type": "Answer", "text": "Absolutely! The polished CNC-machined aluminum block plate with its engraved logo not only provides superior durability but also adds a premium, upgraded look to your engine bay, setting your vehicle apart." } }, { "@type": "Question", "name": "Will I need to retune my engine after installing the SPELAB intake manifold?", "acceptedAnswer": { "@type": "Answer", "text": "No, the SPELAB for 6.7 Dodge Ram intake manifold upgrade is designed for a direct fit without requiring additional tuning." } }, { "@type": "Question", "name": "Is this intake manifold compatible with my 2019 Dodge Ram 2500?", "acceptedAnswer": { "@type": "Answer", "text": "Yes, the SPELAB for 6.7 Dodge Ram intake manifold is compatible with all Dodge Ram 2500/3500 models from 2007 to 2024." } }, { "@type": "Question", "name": "How much horsepower can I expect to gain from this upgrade?", "acceptedAnswer": { "@type": "Answer", "text": "Depending on your engine’s condition and current modifications, you can expect to see up to 15% more horsepower after installing the SPELAB for 6.7 Dodge Ram intake manifold upgrade." } }, { "@type": "Question", "name": "How much HP can you get from an intake manifold upgrade?", "acceptedAnswer": { "@type": "Answer", "text": "The horsepower gains from an intake manifold upgrade can vary, but typically you can expect an increase of 10-20 HP, depending on the specific design and engine tuning." } }, { "@type": "Question", "name": "How can I increase the performance of my 6.7 Dodge Ram?", "acceptedAnswer": { "@type": "Answer", "text": "You can increase the performance of your 6.7 Dodge Ram by upgrading the intake manifold, adding a performance exhaust system, installing a better turbocharger, and tuning the engine for optimal performance." } }, { "@type": "Question", "name": "What are the benefits of upgrading the intake manifold?", "acceptedAnswer": { "@type": "Answer", "text": "Upgrading the intake manifold improves airflow, increases engine efficiency, enhances throttle response, and can lead to better fuel economy and higher horsepower." } }, { "@type": "Question", "name": "Is the SPELAB intake manifold compatible with my stock engine setup?", "acceptedAnswer": { "@type": "Answer", "text": "Yes, the SPELAB intake manifold is designed to be compatible with stock engine setups for Dodge Ram 2500/3500 models from 2007 to 2024, making installation straightforward without requiring additional modifications." } }, { "@type": "Question", "name": "Do I need to tune my engine after upgrading the intake manifold?", "acceptedAnswer": { "@type": "Answer", "text": "While tuning can further optimize performance, the SPELAB for 6.7 Dodge Ram intake manifold provides noticeable improvements without requiring engine tuning." } }, { "@type": "Question", "name": "How does the SPELAB intake manifold improve fuel efficiency?", "acceptedAnswer": { "@type": "Answer", "text": "The SPELAB intake manifold increases air density and improves combustion efficiency, which can lead to better fuel economy, especially during heavy towing or long-distance driving." } }, { "@type": "Question", "name": "Can I install the SPELAB intake manifold myself?", "acceptedAnswer": { "@type": "Answer", "text": "Yes, the SPELAB intake manifold comes with a complete installation kit, including hardware and instructions, making it suitable for DIY installation." } }, { "@type": "Question", "name": "What material is the SPELAB intake manifold made of?", "acceptedAnswer": { "@type": "Answer", "text": "The SPELAB for 6.7 Dodge Ram intake manifold is made from high-quality aluminum alloy, offering superior durability and heat resistance." } }, { "@type": "Question", "name": "Does upgrading my intake manifold affect other parts of my engine?", "acceptedAnswer": { "@type": "Answer", "text": "Upgrading your intake manifold enhances airflow and engine performance without negatively affecting other parts. It’s designed to work seamlessly with stock components." } }, { "@type": "Question", "name": "How can I tell if the heater bolts are faulty?", "acceptedAnswer": { "@type": "Answer", "text": "Look for difficulties during cold starts, such as white smoke or unusual noises. Inspect the bolts for cracks, looseness, or signs of corrosion on the surface." } }, { "@type": "Question", "name": "How does the SPELAB intake manifold upgrade prevent heater bolt failure?", "acceptedAnswer": { "@type": "Answer", "text": "The intake manifold optimizes airflow, improves combustion efficiency, and reduces carbon buildup, thereby lowering the risk of heater bolt damage." } }, { "@type": "Question", "name": "Is it safe to completely remove the heater bolts?", "acceptedAnswer": { "@type": "Answer", "text": "In warmer climates, completely removing the heater bolts will not affect engine starting performance. In colder regions, it is recommended to install spiral heaters and optimize the intake system to ensure smooth engine starts during winter." } }, { "@type": "Question", "name": "How can I prevent heater bolt breakage?", "acceptedAnswer": { "@type": "Answer", "text": "Regularly inspect and use high-quality alloy bolts. SPELAB’s delete plate optimization design fundamentally eliminates the issue of bolt detachment." } }, { "@type": "Question", "name": "What are the main advantages of the SPELAB modification?", "acceptedAnswer": { "@type": "Answer", "text": "It eliminates the risk of heater bolt breakage. By combining spiral heaters, the engine will still start smoothly even under cold conditions." } } ] }

---tab Description--- Description Unlock the full potential of your 2009–2024 Dodge Ram 2500/3500 6.7L with the SPELAB Performance Package — combining the EGR Delete Kit and High-Flow Intake Manifold. Designed for performance enthusiasts, this upgrade delivers enhanced airflow, improved engine efficiency, and unmatched durability. With precision-engineered components like the CNC-machined intake block plate, integrated DDC bracket, and oversized intake horn, you’ll experience faster throttle response, cooler engine temperatures, and superior fuel economy — all while giving your engine bay a premium, polished look. Perfect for drivers who demand the best from their trucks, whether on the highway, job site, or off-road. Kit Includes: SPELAB Intake Manifold/Horn SPELAB Grid Heater Delete SPELAB EGR Delete Kit SPELAB EGR Throttle Valve Delete Fitment: 2009-2024 Dodge Ram 2500/3500 6.7L Diesel. Not compatible with Cab & Chassis (C&C) models. Key Features: Integrated DDC Base Pipe Bracket: Directly mounts onto the engine without the need for exhaust studs, simplifying installation and enhancing durability. CNC-Machined Aluminum Intake Block Plate: Features a polished finish and engraved logo, combining durability with a premium aesthetic in your engine bay. Oversized High-Flow Intake Manifold: 88% increased airflow over stock, delivering more oxygen to the cylinders for better combustion and power. Optimized Airflow & Boost Efficiency: Reduces pressure drop and prevents boost loss, improving engine response under load. 45-Degree Angled Sensor Port: Allows for easier sensor installation and maintenance thanks to the new forward-facing, angled sensor connector. Advanced Stud and Compact Design: Three-dimensional concave stud structure ensures secure mounting, while the near 180-degree bend reduces restrictions and improves under-hood clearance. Boosted Performance and Fuel Efficiency: Removes EGR restrictions and maximizes air intake, delivering faster throttle response, better fuel economy, and more consistent performance, whether towing, off-roading, or daily driving. Durable Aluminum Construction with Finish Options: Crafted from premium aluminum alloy, available in Red powder-coated, Black, or Raw finishes to match your engine bay’s look. Specifications: Application EGR Delete + High-Flow Intake Manifold Kit for 6.7L Dodge Ram Materials CNC-machined aluminum (EGR block plate), cast aluminum alloy (intake manifold) Manifold Inlet Size 3-3/8 inch Sensor Ports Four 1/8 inch NPT ports for flexible integration Installation SPELAB Intake Manifold For 2013-2018 6.7L Dodge Ram SPELAB EGR Delete Kit For 2009-2024 6.7L Dodge Ram ---tab FAQ--- FAQs Q: What makes the SPELAB EGR Delete Kit unique?A: The SPELAB EGR Delete Kit features a custom CNC-machined aluminum intake block plate with a sleek polished finish and an exclusive engraved logo. Its unique design not only enhances functionality but also makes it a collectible-grade accessory for diesel enthusiasts. Q: Why is the model year compatibility listed as 2009-2024 instead of 2009.5-2024?A: To prevent any confusion for customers, the compatibility range was simplified to 2009-2024. This ensures accuracy, as the kit is specifically designed to fit 2009+ Ram 2500/3500 models with the 6.7L Dodge Ram engine. It is not suitable for Cab & Chassis (C&C) models. Q: How does the DDC bracket improve installation?A: The integrated DDC base pipe bracket eliminates the need for exhaust studs, making the installation process faster and more straightforward. This innovative feature ensures a precise and secure fit, saving time and effort. Q: Is this EGR Delete Kit designed to work with other SPELAB products?A: Yes, this kit is specifically engineered to perfectly complement SPELAB’s 6.7 Dodge Ram intake manifold. Together, they deliver optimal performance, durability, and a seamless upgrade experience for your engine bay. Q: Can the SPELAB EGR Delete Kit enhance the aesthetics of my engine bay?A: Absolutely! The polished CNC-machined aluminum block plate with its engraved logo not only provides superior durability but also adds a premium, upgraded look to your engine bay, setting your vehicle apart. Q: Will I need to retune my engine after installing the SPELAB intake manifold?A: No, the SPELAB for 6.7 Dodge Ram intake manifold upgrade is designed for a direct fit without requiring additional tuning. Q: Is this intake manifold compatible with my 2019 Dodge Ram 2500?A: Yes, the SPELAB for 6.7 Dodge Ram intake manifold is compatible with all Dodge Ram 2500/3500 models from 2007 to 2024. Q: How much horsepower can I expect to gain from this upgrade?A: Depending on your engine’s condition and current modifications, you can expect to see up to 15% more horsepower after installing the SPELAB for 6.7 Dodge Ram intake manifold upgrade. Q: How much HP can you get from an intake manifold upgrade?A: The horsepower gains from an intake manifold upgrade can vary, but typically you can expect an increase of 10-20 HP, depending on the specific design and engine tuning. Q: How can I increase the performance of my for 6.7 Dodge Ram?A: You can increase the performance of your for 6.7 Dodge Ram by upgrading the intake manifold, adding a performance exhaust system, installing a better turbocharger, and tuning the engine for optimal performance. Q: What are the benefits of upgrading the intake manifold?A: Upgrading the intake manifold improves airflow, increases engine efficiency, enhances throttle response, and can lead to better fuel economy and higher horsepower. Q: Is the SPELAB for 6.7 Dodge Ram intake manifold compatible with my stock engine setup?A: Yes, the SPELAB intake manifold is designed to be compatible with stock engine setups for Dodge Ram 2500/3500 models from 2007 to 2024, making installation straightforward without requiring additional modifications. Q: Do I need to tune my engine after upgrading the intake manifold?A: While tuning can further optimize performance, the SPELAB for 6.7 Dodge Ram intake manifold provides noticeable improvements without requiring engine tuning. Q: How does the SPELAB intake manifold improve fuel efficiency?A: The SPELAB intake manifold increases air density and improves combustion efficiency, which can lead to better fuel economy, especially during heavy towing or long-distance driving. Q: Can I install the SPELAB for 6.7 Dodge Ram intake manifold myself?A: Yes, the SPELAB intake manifold comes with a complete installation kit, including hardware and instructions, making it suitable for DIY installation. Q: What material is the SPELAB intake manifold made of?A: The SPELAB for 6.7 Dodge Ram intake manifold is made from high-quality aluminum alloy, offering superior durability and heat resistance. Q: Does upgrading my intake manifold affect other parts of my engine?A: Upgrading your intake manifold enhances airflow and engine performance without negatively affecting other parts. It’s designed to work seamlessly with stock components. Q: How can I tell if the heater bolts are faulty?A: Look for difficulties during cold starts, such as white smoke or unusual noises. Inspect the bolts for cracks, looseness, or signs of corrosion on the surface. Q: How does the SPELAB 6.7L Dodge Ram intake manifold upgrade prevent heater bolt failure?A: The intake manifold optimizes airflow, improves combustion efficiency, and reduces carbon buildup, thereby lowering the risk of heater bolt damage. Q: Is it safe to completely remove the heater bolts?A: In warmer climates, completely removing the heater bolts will not affect engine starting performance. In colder regions, it is recommended to install spiral heaters and optimize the intake system to ensure smooth engine starts during winter. Q: How can I prevent heater bolt breakage?A: Regularly inspect and use high-quality alloy bolts. SPELAB’s delete plate optimization design fundamentally eliminates the issue of bolt detachment. Q: What are the main advantages of the SPELAB modification?A: It eliminates the risk of heater bolt breakage. By combining spiral heaters, the engine will still start smoothly even under cold conditions. ---tab Shipping & Returns--- Fast Shipping Policy Your order will be dispatched within 1-2 business days, and the package will arrive within your order's estimated date. Click for Shipping Policy Easy Return Policy Every order comes with a 14-day free return, which means you don't have to pay for a return slip. Click for Return Policy ---tab Blog & Video--- Video 6.7 Dodge Ram: Full Performance Mod Install! Watch a detailed, step-by-step installation of SPELAB parts on a 6.7 Dodge Ram truck. Upgrade its performance, sound, and reliability. Before & After Review Sound Test See How It's Done: 6.7 Dodge Ram Performance Installation Watch this 6.7 Dodge Ram truck transform with intake, exhaust, EGR, and grid heater delete installs. See the massive performance boost! Installation Guide Before & After Review See the Installation: SPELAB Intake Horn & Grid Heater Delete Watch the detailed process of installing an SPELAB intake horn and grid heater delete on a 6.7 Dodge Ram, including a product review. Installation Guide Review Performance Upgrade See the Upgrade: SPELAB RAM 2500 Dodge Ram Intake Horn Installation Discover the amazing results of installing a SPELAB intake horn on a RAM 2500 Dodge Ram. This video includes installation tips and a review! Installation Guide Review Discover the Difference: Dodge Ram Engine Power Improvements Explore how this Dodge Ram engine's power is dramatically improved with an EGR delete, grid heater delete, and new intake manifold. Performance Showcase Review × { "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [ { "@type": "Question", "name": "What makes the SPELAB EGR Delete Kit unique?", "acceptedAnswer": { "@type": "Answer", "text": "The SPELAB EGR Delete Kit features a custom CNC-machined aluminum intake block plate with a sleek polished finish and an exclusive engraved logo. Its unique design not only enhances functionality but also makes it a collectible-grade accessory for diesel enthusiasts." } }, { "@type": "Question", "name": "Why is the model year compatibility listed as 2009-2024 instead of 2009.5-2024?", "acceptedAnswer": { "@type": "Answer", "text": "To prevent any confusion for customers, the compatibility range was simplified to 2009-2024. This ensures accuracy, as the kit is specifically designed to fit 2009+ Ram 2500/3500 models with the 6.7L Dodge Ram engine. It is not suitable for Cab & Chassis (C&C) models." } }, { "@type": "Question", "name": "How does the DDC bracket improve installation?", "acceptedAnswer": { "@type": "Answer", "text": "The integrated DDC base pipe bracket eliminates the need for exhaust studs, making the installation process faster and more straightforward. This innovative feature ensures a precise and secure fit, saving time and effort." } }, { "@type": "Question", "name": "Is this EGR Delete Kit designed to work with other SPELAB products?", "acceptedAnswer": { "@type": "Answer", "text": "Yes, this kit is specifically engineered to perfectly complement SPELAB’s 6.7 Dodge Ram intake manifold. Together, they deliver optimal performance, durability, and a seamless upgrade experience for your engine bay." } }, { "@type": "Question", "name": "Can the SPELAB EGR Delete Kit enhance the aesthetics of my engine bay?", "acceptedAnswer": { "@type": "Answer", "text": "Absolutely! The polished CNC-machined aluminum block plate with its engraved logo not only provides superior durability but also adds a premium, upgraded look to your engine bay, setting your vehicle apart." } }, { "@type": "Question", "name": "Will I need to retune my engine after installing the SPELAB intake manifold?", "acceptedAnswer": { "@type": "Answer", "text": "No, the SPELAB for 6.7 Dodge Ram intake manifold upgrade is designed for a direct fit without requiring additional tuning." } }, { "@type": "Question", "name": "Is this intake manifold compatible with my 2019 Dodge Ram 2500?", "acceptedAnswer": { "@type": "Answer", "text": "Yes, the SPELAB for 6.7 Dodge Ram intake manifold is compatible with all Dodge Ram 2500/3500 models from 2007 to 2024." } }, { "@type": "Question", "name": "How much horsepower can I expect to gain from this upgrade?", "acceptedAnswer": { "@type": "Answer", "text": "Depending on your engine’s condition and current modifications, you can expect to see up to 15% more horsepower after installing the SPELAB for 6.7 Dodge Ram intake manifold upgrade." } }, { "@type": "Question", "name": "How much HP can you get from an intake manifold upgrade?", "acceptedAnswer": { "@type": "Answer", "text": "The horsepower gains from an intake manifold upgrade can vary, but typically you can expect an increase of 10-20 HP, depending on the specific design and engine tuning." } }, { "@type": "Question", "name": "How can I increase the performance of my 6.7 Dodge Ram?", "acceptedAnswer": { "@type": "Answer", "text": "You can increase the performance of your 6.7 Dodge Ram by upgrading the intake manifold, adding a performance exhaust system, installing a better turbocharger, and tuning the engine for optimal performance." } }, { "@type": "Question", "name": "What are the benefits of upgrading the intake manifold?", "acceptedAnswer": { "@type": "Answer", "text": "Upgrading the intake manifold improves airflow, increases engine efficiency, enhances throttle response, and can lead to better fuel economy and higher horsepower." } }, { "@type": "Question", "name": "Is the SPELAB intake manifold compatible with my stock engine setup?", "acceptedAnswer": { "@type": "Answer", "text": "Yes, the SPELAB intake manifold is designed to be compatible with stock engine setups for Dodge Ram 2500/3500 models from 2007 to 2024, making installation straightforward without requiring additional modifications." } }, { "@type": "Question", "name": "Do I need to tune my engine after upgrading the intake manifold?", "acceptedAnswer": { "@type": "Answer", "text": "While tuning can further optimize performance, the SPELAB for 6.7 Dodge Ram intake manifold provides noticeable improvements without requiring engine tuning." } }, { "@type": "Question", "name": "How does the SPELAB intake manifold improve fuel efficiency?", "acceptedAnswer": { "@type": "Answer", "text": "The SPELAB intake manifold increases air density and improves combustion efficiency, which can lead to better fuel economy, especially during heavy towing or long-distance driving." } }, { "@type": "Question", "name": "Can I install the SPELAB intake manifold myself?", "acceptedAnswer": { "@type": "Answer", "text": "Yes, the SPELAB intake manifold comes with a complete installation kit, including hardware and instructions, making it suitable for DIY installation." } }, { "@type": "Question", "name": "What material is the SPELAB intake manifold made of?", "acceptedAnswer": { "@type": "Answer", "text": "The SPELAB for 6.7 Dodge Ram intake manifold is made from high-quality aluminum alloy, offering superior durability and heat resistance." } }, { "@type": "Question", "name": "Does upgrading my intake manifold affect other parts of my engine?", "acceptedAnswer": { "@type": "Answer", "text": "Upgrading your intake manifold enhances airflow and engine performance without negatively affecting other parts. It’s designed to work seamlessly with stock components." } }, { "@type": "Question", "name": "How can I tell if the heater bolts are faulty?", "acceptedAnswer": { "@type": "Answer", "text": "Look for difficulties during cold starts, such as white smoke or unusual noises. Inspect the bolts for cracks, looseness, or signs of corrosion on the surface." } }, { "@type": "Question", "name": "How does the SPELAB intake manifold upgrade prevent heater bolt failure?", "acceptedAnswer": { "@type": "Answer", "text": "The intake manifold optimizes airflow, improves combustion efficiency, and reduces carbon buildup, thereby lowering the risk of heater bolt damage." } }, { "@type": "Question", "name": "Is it safe to completely remove the heater bolts?", "acceptedAnswer": { "@type": "Answer", "text": "In warmer climates, completely removing the heater bolts will not affect engine starting performance. In colder regions, it is recommended to install spiral heaters and optimize the intake system to ensure smooth engine starts during winter." } }, { "@type": "Question", "name": "How can I prevent heater bolt breakage?", "acceptedAnswer": { "@type": "Answer", "text": "Regularly inspect and use high-quality alloy bolts. SPELAB’s delete plate optimization design fundamentally eliminates the issue of bolt detachment." } }, { "@type": "Question", "name": "What are the main advantages of the SPELAB modification?", "acceptedAnswer": { "@type": "Answer", "text": "It eliminates the risk of heater bolt breakage. By combining spiral heaters, the engine will still start smoothly even under cold conditions." } } ] }

---tab Description--- Fitment Old Intake Manifold: For 2007-2018 Dodge Ram 2500 3500 6.7L Diesel New Intake Manifold: For 2013-2018 Dodge Ram 2500 3500 6.7L Diesel Grid Heater: For 2007-2024 Dodge Ram 2500 3500 6.7L Diesel Features 2 NPT ports 0.5-1 MPG increase 50-200 degrees F drop in EGT's Unobstructed 3.5" inlet to two 3" mandrel bent tubes Specifications Brand Name SPELAB Certificate ISO9001:2000 Application Performance SS Intake Manifold Material Stainless Steel Surface Mirror Polish The SPELAB Grid Heater Delete/Upgrade Plate is designed for the 2007.5-2024 RAM 2500/3500 with for 6.7L Dodge Ram engines, crafted from high-quality billet aluminum for durability and performance. CNC machined to ensure precision, the plate features an anodized and brushed surface for enhanced corrosion resistance and a sleek finish, along with an engraved logo for added style. This upgrade plate replaces the stock grid heater, which is prone to carbon buildup due to the EGR system, and offers several key benefits: Improves airflow by eliminating the restrictive factory heater. Reduces intake temperatures, enhancing engine efficiency and power output. Lowers electrical load, reducing strain on your vehicle's electrical system. Streamlines engine bay layout, improving the aesthetic appeal and accessibility. Enhances engine performance with a simplified, cleaner setup. Product Details Unique Design Allows Better Installation Of The Intake Horn. ---tab Overview--- Upgrade Your for 2007-2018 6.7 Dodge Ram Intake Horn with SPELAB Intake Manifold Enhance your for 2007-2018 6.7 Dodge Ram engine with SPELAB's high-performance intake manifold. Boost airflow, efficiency, and throttle response for ultimate performance. Upgrade your for 2007-2018 6.7 Dodge Ram engine with the SPELAB Intake Manifold for Dodge Ram 2500/3500. Enhance airflow, boost efficiency, and experience quicker throttle response with this high-performance for 2007-2018 6.7 Dodge Ram intake horn upgrade. Unlock the full potential of your for 2007-2018 6.7 Dodge Ram engine with the SPELAB Intake Manifold, designed specifically for 2007-2018 Dodge Ram 2500/3500. Whether you're looking to enhance airflow, improve engine efficiency, or achieve faster throttle response, this for 6.7 intake manifold upgrade offers a seamless solution for performance enthusiasts. This manifold ensures your engine breathes easier, delivers more oxygen to the cylinders, and boosts power output without requiring additional tuning. Why Choose SPELAB for 2007-2018 6.7 Dodge Ram Intake Horn? Enhanced Airflow with SPELAB for 6.7 Dodge Ram Intake Manifold UpgradeThe SPELAB 2007-2018 6.7 Dodge Ram intake manifold is engineered to significantly increase airflow into your engine. It features a larger, unrestricted design compared to the stock intake horn, allowing for more oxygen-rich air to reach the engine cylinders. This improvement not only enhances combustion but also boosts overall performance. In fact, this upgrade delivers an impressive 88% increase in airflow, ensuring your engine operates at peak efficiency. Optimized for Maximum PerformanceThe design for Dodge Ram intake horn upgrade focuses on maximizing engine performance. By reducing air pressure drop and enhancing air density, this manifold ensures your engine can generate more power and improve throttle response. Whether you're hauling heavy loads or enjoying daily driving, the SPELAB 2007-2018 6.7 Dodge Ram intake horn helps your engine perform better in all conditions. Benefits of Upgrading to SPELAB 2007-2018 6.7 Dodge Ram Intake Horn Increased Air Density and Boost EfficiencyThis for 2007-2018 6.7 Dodge Ram intake manifold upgrade increases air density by improving airflow to the cylinders. This leads to more efficient combustion and higher boost efficiency. With its unique design, the SPELAB horn allows your engine to handle higher boost levels without adding stress to the turbine, ensuring smoother, more reliable performance. Faster Throttle Response and Better CombustionThe SPELAB for 6.7 Dodge Ram intake horn upgrade also helps deliver faster throttle response by allowing more air into the engine quicker. This provides more immediate power delivery, making your truck feel more responsive and easier to control. Whether you're accelerating on the highway or navigating tough off-road conditions, you’ll notice the difference. Easy Installation and Compatibility with for 2007-2018 6.7 Dodge Ram Hassle-Free InstallationThe SPELAB 2007-2018 6.7 Dodge Ram intake horn upgrade is designed for a direct fit with stock mounting points. Compatible with 2007-2024 Dodge Ram 2500/3500 models, this upgrade doesn't require any additional tuning or modifications. The package includes all necessary hardware, ensuring a smooth and seamless installation process. Stock CompatibilityThis for Dodge Ram intake manifold upgrade is fully compatible with your engine’s existing components. It ensures a seamless fit without requiring any additional modifications. The manifold comes with a robust 3-3/8 inch inlet and four 1/8 inch NPT ports, allowing for flexible sensor integration and customization. SPELAB Intake Manifold Upgrade Materials and Options Durable Aluminum Alloy ConstructionThe SPELAB 2007-2018 6.7 Dodge Ram intake horn is crafted from high-grade aluminum alloy. This construction offers superior durability and heat resistance. It ensures that the manifold can withstand the rigors of high-performance driving while maintaining consistent performance, even under extreme conditions. Finish Options to Match Your Engine BayAvailable in three stunning finish options—Red powder-coated, Black, and Raw. The SPELAB 2007-2018 6.7 Dodge Ram intake horn upgrade allows you to customize the look of your engine bay while improving performance. Whether you're looking for a sleek, subtle look or something that stands out, SPELAB has the right option for you. Experience the Full Potential of Your 2007-2018 6.7 Dodge Ram Engine with SPELABWith the SPELAB for 6.7 Dodge Ram intake horn, you're not just upgrading a component—you're enhancing the entire driving experience. From faster throttle response to improved fuel efficiency, this for 6.7 Dodge Ram intake horn upgrade delivers real-world benefits you can feel every time you drive. Unlock the full potential of your Dodge Ram engine and elevate your truck’s performance today. FAQs Q1: What is the benefit of upgrading to the SPELAB 2007-2018 6.7 Dodge Ram intake manifold?A1: Upgrading to the SPELAB intake manifold enhances airflow, boosts engine efficiency, and improves throttle response, allowing for better overall performance. Q2: Is the SPELAB intake manifold compatible with my 2007-2024 Dodge Ram 2500/3500?A2: Yes, the SPELAB intake horn is specifically designed for compatibility with 2007-2024 Dodge Ram 2500 and 3500 models. Q3: Will I need to tune my engine after installing the intake manifold?A3: No, the SPELAB intake horn is designed for a direct fit and does not require additional tuning after installation. Q4: How much airflow improvement can I expect from this upgrade?A4: The SPELAB intake horn delivers an impressive 88% increase in airflow compared to the OEM intake manifold. Q5: Is the installation process complicated?A5: The installation is hassle-free and designed for a direct fit, making it easy for anyone with basic mechanical skills to install. Q6: What materials is the SPELAB intake manifold made from?A6: The manifold is crafted from high-grade aluminum alloy, ensuring durability and heat resistance. Q7: What finish options are available for the SPELAB intake manifold?A7: You can choose from three finish options: Red powder-coated, Black, and Raw. Q8: How does the intake manifold affect throttle response?A8: The SPELAB intake horn allows more air into the engine more quickly, providing faster throttle response and more immediate power delivery. Q9: Can the intake manifold handle higher boost levels?A9: Yes, the unique design of the SPELAB Horn allows your engine to handle higher boost levels without stressing the turbine. Q10: Will this upgrade improve my towing performance?A10: Absolutely! The improved airflow and efficiency make the SPELAB intake horn a great choice for enhancing towing performance and overall engine capability. Explore our complete collection of 6.7 Cummins intake horn to find the perfect upgrade for your truck. ---tab Shipping & Returns--- Fast Shipping Policy Your order will be dispatched within 1-2 business days, and the package will arrive within your order's estimated date. Click for Shipping Policy Easy Return Policy Every order comes with a 14-day free return, which means you don't have to pay for a return slip. Click for Return Policy { "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [ { "@type": "Question", "name": "What is the benefit of upgrading to the SPELAB 2007-2018 6.7 Dodge Ram intake manifold?", "acceptedAnswer": { "@type": "Answer", "text": "Upgrading to the SPELAB intake manifold enhances airflow, boosts engine efficiency, and improves throttle response, allowing for better overall performance." } }, { "@type": "Question", "name": "Is the SPELAB intake manifold compatible with my 2007-2024 Dodge Ram 2500/3500?", "acceptedAnswer": { "@type": "Answer", "text": "Yes, the SPELAB intake horn is specifically designed for compatibility with 2007-2024 Dodge Ram 2500 and 3500 models." } }, { "@type": "Question", "name": "Will I need to tune my engine after installing the intake manifold?", "acceptedAnswer": { "@type": "Answer", "text": "No, the SPELAB intake horn is designed for a direct fit and does not require additional tuning after installation." } }, { "@type": "Question", "name": "How much airflow improvement can I expect from this upgrade?", "acceptedAnswer": { "@type": "Answer", "text": "The SPELAB intake horn delivers an impressive 88% increase in airflow compared to the OEM intake manifold." } }, { "@type": "Question", "name": "Is the installation process complicated?", "acceptedAnswer": { "@type": "Answer", "text": "The installation is hassle-free and designed for a direct fit, making it easy for anyone with basic mechanical skills to install." } }, { "@type": "Question", "name": "What materials is the SPELAB intake manifold made from?", "acceptedAnswer": { "@type": "Answer", "text": "The manifold is crafted from high-grade aluminum alloy, ensuring durability and heat resistance." } }, { "@type": "Question", "name": "What finish options are available for the SPELAB intake manifold?", "acceptedAnswer": { "@type": "Answer", "text": "You can choose from three finish options: Red powder-coated, Black, and Raw." } }, { "@type": "Question", "name": "How does the intake manifold affect throttle response?", "acceptedAnswer": { "@type": "Answer", "text": "The SPELAB intake horn allows more air into the engine more quickly, providing faster throttle response and more immediate power delivery." } }, { "@type": "Question", "name": "Can the intake manifold handle higher boost levels?", "acceptedAnswer": { "@type": "Answer", "text": "Yes, the unique design of the SPELAB Horn allows your engine to handle higher boost levels without stressing the turbine." } }, { "@type": "Question", "name": "Will this upgrade improve my towing performance?", "acceptedAnswer": { "@type": "Answer", "text": "Absolutely! The improved airflow and efficiency make the SPELAB intake horn a great choice for enhancing towing performance and overall engine capability." } } ] }

---tab Description--- Description The SPELAB 2007-2024 6.7L Dodge Ram Intake Manifold/Horn enhances performance for 2007-2024 6.7L Dodge Ram engines with improved airflow and durability. Compatible with our EGR Delete Kit, it offers easy installation and performance whether or not the EGR is deleted. Designed with heating element provisions, you can seal the ports in warm weather or install them in colder conditions. Available in black, silver, and red, it delivers reliable performance and customization for your engine. Key Features Hassle-Free Installation: Designed for a direct fit with stock mounting points, ensuring a hassle-free installation. This upgrade doesn't require any additional tuning or modifications. Enhanced Airflow Design: Featuring a more prominent SPELAB logo, the intake manifold provides increased internal space, improving air intake for better engine performance. Precision Fit: The top cover design is expertly crafted to integrate seamlessly with the SPELAB EGR Plate, ensuring a snug fit and optimized performance. 45-Degree Sensor Port: The manifold includes a new 45-degree angled sensor connector located at the front, allowing for easy access and precise sensor installation. Advanced Stud Design: Our unique stud design extends to the exterior of the intake cylinder block with a sophisticated three-dimensional concave structure, ensuring a secure and efficient installation. Sensor & Boost-Ready: Features four 1/8” NPT threaded ports, easily install boost gauges, sensors, or other performance add-ons. Compact and Efficient: The manifold’s smaller bend angle and near 180-degree parallel alignment reduce airflow restriction, while the lower overall height enhances under-hood clearance and airflow dynamics. Enhanced Airflow with SPELAB 2007-2024 6.7 Dodge Ram Intake Manifold Upgrade The SPELAB 2007-2024 6.7 Dodge Ram intake horn is engineered to significantly increase airflow into your engine. It features a larger, unrestricted design compared to the stock intake manifold, allowing for more oxygen-rich air to reach the engine cylinders. This not only improves combustion but also boosts overall performance. In fact, this upgrade delivers an impressive 88% increase in airflow, ensuring that your engine operates at peak efficiency. 2X OEM Diameter For Dodge Ram engine requires substantial airflow, but the restrictive OEM air intake limits performance. SPELAB’s larger, high-flow intake horn—double the size of the OEM—eliminates airflow restrictions and prevents boost loss, allowing for smooth, unrestricted air delivery. Boost Performance and Fuel Efficiency The SPELAB 2007-2024 6.7 Dodge Ram High-Flow Intake Manifold/Trumpet is designed to enhance engine air intake efficiency. Its streamlined, unobstructed structure significantly increases airflow, boosting engine performance. Unlike the factory heat shields, which are prone to carbon buildup and blockage over time, SPELAB’s innovative use of heating elements replaces traditional heating methods, effectively preventing blockages while maintaining optimal performance. This product is the ideal choice for improving engine power and reliability. Specifications Material Cast Aluminum Alloy Weight 4.2 kg (9.26 lbs) Package Dimensions 37 × 27 × 24.5 cm (14.6 × 10.6 × 9.6 inches) Manifold Inlet Size 3-3/8 inch Installation Type Direct Bolt-On (No Modifications Required) Ports Included 4 × 1/8" NPT Threaded Ports Heating Element Included No (Heating element must be purchased separately if needed.) Tuning Requirement Not Required Fuel System Compatibility Fully compatible with OEM fuel lines & emission equipment Heating Element Usage The heating element is optional and only necessary when operating in temperatures below 0°C (32°F). Fitment 2007-2024 6.7 Dodge Ram intake manifold/Horn: Dodge Ram 2500/3500 6.7L Diesel Intake manifold kit for chassis cab: 2013-2018 Dodge Ram 3500-5500 6.7L Chassis-Cab Only (Also Fits Dual-Alternator Engines) Grid Heater Delete Plate: 2007-2024 Dodge Ram 2500/3500 6.7L Dodge Ram Diesel Installation SPELAB Intake Manifold For 2013-2024 6.7L Dodge Ram ---tab Why SPELAB--- Benefits of Upgrading to SPELAB 2007-2024 6.7 Dodge Ram Intake Manifold Increased Air Density and Boost Efficiency This 2007-2024 6.7 Dodge Ram intake manifold upgrade increases air density by improving airflow to the cylinders, leading to more efficient combustion and higher boost efficiency. With its unique design, the SPELAB manifold allows your engine to handle higher boost levels without adding stress to the turbine, ensuring smoother, more reliable performance. This means better performance for towing, off-roading, or high-speed driving. Faster Throttle Response and Better Combustion The SPELAB 2007-2024 6.7 Dodge Ram intake manifold upgrade also helps deliver faster throttle response by allowing more air into the engine quicker. This provides more immediate power delivery, making your truck feel more responsive and easier to control, whether you're accelerating on the highway or navigating tough off-road conditions. Easy Installation and Compatibility with for 6.7 Dodge Ram Hassle-Free Installation The SPELAB 2007-2024 6.7 Dodge Ram intake manifold upgrade is designed for a direct fit with stock mounting points, ensuring a hassle-free installation. This upgrade doesn't require any additional tuning or modifications. The package includes all necessary hardware, such as paper gaskets, washers, bolts, and a proprietary fuel line, ensuring a smooth and seamless installation process. Stock Compatibility This for Dodge Ram intake manifold upgrade is fully compatible with your engine’s existing components, ensuring a seamless fit without requiring any additional modifications. It also comes with a robust 3-3/8 inch inlet and four 1/8 inch NPT ports, allowing for flexible sensor integration and easy customization to suit your specific performance needs. SPELAB Intake Manifold Upgrade Materials and Options Durable Aluminum Alloy Construction The SPELAB 2007-2024 6.7 Dodge Ram intake manifold is crafted from high-grade aluminum alloy, offering superior durability and heat resistance. This ensures that the manifold can withstand the rigors of high-performance driving while maintaining consistent performance, even under extreme conditions. Finish Options to Match Your Engine Bay Available in three stunning finish options—Red powder-coated, Black, and Raw—the SPELAB for 6.7 Dodge Ram intake manifold upgrade allows you to customize the look of your engine bay while improving performance. Whether you're looking for a sleek, subtle look or something that stands out, SPELAB has the right option for you. Experience the Full Potential of Your 2007-2024 6.7L Dodge Ram Engine with SPELAB With the SPELAB 2007-2024 6.7 Dodge Ram intake manifold, you're not just upgrading a component—you're enhancing the entire driving experience. From faster throttle response to improved fuel efficiency, this for Cummins intake manifold upgrade delivers real-world benefits you can feel every time you drive. Unlock the full potential of your Cummins engine and elevate your truck’s performance today. Additionally, the SPELAB 2007-2024 6.7 Dodge Ram intake manifold/Horn is perfectly compatible with our EGR Delete Kit,CCV Delete Kit,Valve Cover,Oil Catch Can ,Intercooler Pipe Kit and Intercooler further unleashing your engine's potential for superior power output when used together. ---tab FAQ--- FAQs Q: Will I need to retune my engine after installing the SPELAB intake manifold?A: No, the SPELAB 2007-2024 6.7 Dodge Ram intake manifold upgrade is designed for a direct fit without requiring additional tuning. Q: Is this intake manifold compatible with my 2019 Dodge Ram 2500?A: Yes, the SPELAB 2007-2024 6.7 Dodge Ram intake manifold is compatible with all Dodge Ram 2500/3500 models from 2007 to 2024. Q: How much horsepower can I expect to gain from this upgrade?A: Depending on your engine’s condition and current modifications, you can expect to see up to 15% more horsepower after installing the SPELAB 2007-2024 6.7 Dodge Ram intake manifold upgrade. Q: How much HP can you get from an intake manifold upgrade?A: The horsepower gains from an intake manifold upgrade can vary, but typically you can expect an increase of 10-20 HP, depending on the specific design and engine tuning. Q: How can I increase the performance of my for 6.7 Dodge Ram?A: You can increase the performance of your 2007-2024 6.7 Dodge Ram by upgrading the intake manifold, adding a performance exhaust system, installing a better turbocharger, and tuning the engine for optimal performance. Q: What are the benefits of upgrading the intake manifold?A: Upgrading the intake manifold improves airflow, increases engine efficiency, enhances throttle response, and can lead to better fuel economy and higher horsepower. Q: Is the SPELAB 2007-2024 6.7 Dodge Ram intake manifold compatible with my stock engine setup?A: Yes, the SPELAB 2007-2024 intake manifold is designed to be compatible with stock engine setups for Dodge Ram 2500/3500 models from 2007 to 2024, making installation straightforward without requiring additional modifications. Q: Do I need to tune my engine after upgrading the intake manifold?A: While tuning can further optimize performance, the SPELAB 2007-2024 6.7 Dodge Ram intake manifold provides noticeable improvements without requiring engine tuning. Q: How does the SPELAB intake manifold improve fuel efficiency?A: The SPELAB intake manifold increases air density and improves combustion efficiency, which can lead to better fuel economy, especially during heavy towing or long-distance driving. Q: Can I install the SPELAB 2007-2024 6.7 Dodge Ram intake manifold myself?A: Yes, the SPELAB intake manifold comes with a complete installation kit, including hardware and instructions, making it suitable for DIY installation. Q: What material is the SPELAB intake manifold made of?A: The SPELAB 2007-2024 6.7 Dodge Ram intake manifold is made from high-quality aluminum alloy, offering superior durability and heat resistance. Q: Does upgrading my intake manifold affect other parts of my engine?A: Upgrading your intake manifold enhances airflow and engine performance without negatively affecting other parts. It’s designed to work seamlessly with stock components. Q: How can I tell if the heater bolts are faulty?A: Look for difficulties during cold starts, such as white smoke or unusual noises. Inspect the bolts for cracks, looseness, or signs of corrosion on the surface. Q: How does the SPELAB 2007-2024 6.7L Dodge Ram intake manifold upgrade prevent heater bolt failure?A: The intake manifold optimizes airflow, improves combustion efficiency, and reduces carbon buildup, thereby lowering the risk of heater bolt damage. Q: Is it safe to completely remove the heater bolts?A: In warmer climates, completely removing the heater bolts will not affect engine starting performance. In colder regions, it is recommended to install spiral heaters and optimize the intake system to ensure smooth engine starts during winter. Q: How can I prevent heater bolt breakage?A: Regularly inspect and use high-quality alloy bolts. SPELAB’s delete plate optimization design fundamentally eliminates the issue of bolt detachment. Q: What are the main advantages of the SPELAB modification?A: It eliminates the risk of heater bolt breakage. By combining spiral heaters, the engine will still start smoothly even under cold conditions. Shop 6.7 cummins intake horn with heater and Explore our complete collection of 6.7 Cummins intake horn to find the perfect upgrade for your truck. { "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [ { "@type": "Question", "name": "Will I need to retune my engine after installing the SPELAB intake manifold?", "acceptedAnswer": { "@type": "Answer", "text": "No, the SPELAB 2007-2024 6.7 Dodge Ram intake manifold upgrade is designed for a direct fit without requiring additional tuning." } }, { "@type": "Question", "name": "Is this intake manifold compatible with my 2019 Dodge Ram 2500?", "acceptedAnswer": { "@type": "Answer", "text": "Yes, the SPELAB 2007-2024 6.7 Dodge Ram intake manifold is compatible with all Dodge Ram 2500/3500 models from 2007 to 2024." } }, { "@type": "Question", "name": "How much horsepower can I expect to gain from this upgrade?", "acceptedAnswer": { "@type": "Answer", "text": "Depending on your engine’s condition and current modifications, you can expect to see up to 15% more horsepower after installing the SPELAB 2007-2024 6.7 Dodge Ram intake manifold upgrade." } }, { "@type": "Question", "name": "How much HP can you get from an intake manifold upgrade?", "acceptedAnswer": { "@type": "Answer", "text": "The horsepower gains from an intake manifold upgrade can vary, but typically you can expect an increase of 10-20 HP, depending on the specific design and engine tuning." } }, { "@type": "Question", "name": "How can I increase the performance of my 6.7 Dodge Ram?", "acceptedAnswer": { "@type": "Answer", "text": "You can increase the performance of your 2007-2024 6.7 Dodge Ram by upgrading the intake manifold, adding a performance exhaust system, installing a better turbocharger, and tuning the engine for optimal performance." } }, { "@type": "Question", "name": "What are the benefits of upgrading the intake manifold?", "acceptedAnswer": { "@type": "Answer", "text": "Upgrading the intake manifold improves airflow, increases engine efficiency, enhances throttle response, and can lead to better fuel economy and higher horsepower." } }, { "@type": "Question", "name": "Is the SPELAB 2007-2024 6.7 Dodge Ram intake manifold compatible with my stock engine setup?", "acceptedAnswer": { "@type": "Answer", "text": "Yes, the SPELAB 2007-2024 intake manifold is designed to be compatible with stock engine setups for Dodge Ram 2500/3500 models from 2007 to 2024, making installation straightforward without requiring additional modifications." } }, { "@type": "Question", "name": "Do I need to tune my engine after upgrading the intake manifold?", "acceptedAnswer": { "@type": "Answer", "text": "While tuning can further optimize performance, the SPELAB 2007-2024 6.7 Dodge Ram intake manifold provides noticeable improvements without requiring engine tuning." } }, { "@type": "Question", "name": "How does the SPELAB intake manifold improve fuel efficiency?", "acceptedAnswer": { "@type": "Answer", "text": "The SPELAB intake manifold increases air density and improves combustion efficiency, which can lead to better fuel economy, especially during heavy towing or long-distance driving." } }, { "@type": "Question", "name": "Can I install the SPELAB 2007-2024 6.7 Dodge Ram intake manifold myself?", "acceptedAnswer": { "@type": "Answer", "text": "Yes, the SPELAB intake manifold comes with a complete installation kit, including hardware and instructions, making it suitable for DIY installation." } }, { "@type": "Question", "name": "What material is the SPELAB intake manifold made of?", "acceptedAnswer": { "@type": "Answer", "text": "The SPELAB 2007-2024 6.7 Dodge Ram intake manifold is made from high-quality aluminum alloy, offering superior durability and heat resistance." } }, { "@type": "Question", "name": "Does upgrading my intake manifold affect other parts of my engine?", "acceptedAnswer": { "@type": "Answer", "text": "Upgrading your intake manifold enhances airflow and engine performance without negatively affecting other parts. It’s designed to work seamlessly with stock components." } }, { "@type": "Question", "name": "How can I tell if the heater bolts are faulty?", "acceptedAnswer": { "@type": "Answer", "text": "Look for difficulties during cold starts, such as white smoke or unusual noises. Inspect the bolts for cracks, looseness, or signs of corrosion on the surface." } }, { "@type": "Question", "name": "How does the SPELAB 2007-2024 6.7L Dodge Ram intake manifold upgrade prevent heater bolt failure?", "acceptedAnswer": { "@type": "Answer", "text": "The intake manifold optimizes airflow, improves combustion efficiency, and reduces carbon buildup, thereby lowering the risk of heater bolt damage." } }, { "@type": "Question", "name": "Is it safe to completely remove the heater bolts?", "acceptedAnswer": { "@type": "Answer", "text": "In warmer climates, completely removing the heater bolts will not affect engine starting performance. In colder regions, it is recommended to install spiral heaters and optimize the intake system to ensure smooth engine starts during winter." } }, { "@type": "Question", "name": "How can I prevent heater bolt breakage?", "acceptedAnswer": { "@type": "Answer", "text": "Regularly inspect and use high-quality alloy bolts. SPELAB’s delete plate optimization design fundamentally eliminates the issue of bolt detachment." } }, { "@type": "Question", "name": "What are the main advantages of the SPELAB modification?", "acceptedAnswer": { "@type": "Answer", "text": "It eliminates the risk of heater bolt breakage. By combining spiral heaters, the engine will still start smoothly even under cold conditions." } } ] } ---tab Blog & Video--- Video Prevent Grid Heater Failure: SPELAB Intake Manifold & Delete Install Learn how to prevent grid heater failure by installing a SPELAB intake manifold, EGR delete, and exhaust on a 2007-2024 6.7 Dodge Ram. Failure PreventionInstallation Guide Avoid Engine Failure: Grid Heater Delete & SPELAB Intake Horn Upgrade Discover how to prevent engine failure with a grid heater delete and SPELAB intake horn upgrade for improved airflow and performance. Failure Prevention Installation Guide Engine Protection Resolve Failing Bolt Issues: SPELAB Intake Horn Install & Grid Heater Delete Watch the installation of a SPELAB intake manifold and grid heater delete, addressing common failing bolt issues that can lead to engine failure. Troubleshooting Guide Installation Guide Engine Repair Fix Failing Bolt: 6.7 Dodge Ram Grid Heater Delete to Prevent Engine Failure Learn to prevent 6.7 Dodge Ram grid heater failing bolt issues and subsequent engine failure with this detailed installation guide. Repair Guide Failure Prevention Boost Performance: Improve Airflow with 6.7 Dodge Ram Upgrades See how installing a grid heater delete, EGR delete, and intake manifold significantly improves airflow and prevents 6.7 Dodge Ram engine issues. Installation Guide Airflow Improvement Compare Performance: Stock vs. SPELAB Intake Horn Join a two-week road trip comparing a stock intake horn with the SPELAB version, alongside truck builds and car shows. Comparison Video Review ×

Intake Manifold Ford Small Block 351W Typhoon | SPELAB SPELAB's dual-plane intake manifold for the Ford 351W is ideal for street performance applications. With a design that improves top-end power without sacrificing low-end torque. It is cast from lightweight aluminum. Additional provisions include nitrous bosses, a rear water crossover with additional ports, and a square bore carburetor flange. Description: ENGINE BLOCK STYLE OEM Standard Deck CARBURETOR QUANTITY 1 INTAKE STYLE Dual Plane BASIC OPERATING RANGE Idle to 6,800 RPM MANIFOLD HEIGHT 5.12" MANIFOLD MATERAL Aluminum MANIFOLD FINISH Satin EGR No 100% Brand new,never been used Our manifold for 351w engines is the ultimate street performance manifold for this engine. It provides good top end power without sacrificing bottom end torque. Its long runner dual plane design provides the best of both worlds. Best with an aggressive street cam. For street, use a 600-750 cfm vacuum secondary or double pumper carb. For competition, use a 750-850 cfm double pumper. This manifold has a number of features not found in similar competitive manifolds. It includes a rear water crossover passage which can provide for more balanced cylinder head temperatures and a cooler running engine. Professional installation in highly recommended(No instruction included) Package Includes: 1X Intake Manifold As the pictures show FITMENT: Ford Small Block Windsor V8，Small Block Ford 351W 5.8 L / 351 in3 generally referred to as 351W NOTES When bolting on a '74 and earlier engine, use a 16-bolt intake gasket for proper sealing Stock distributor will not fit with this manifold ALERT This product is legal for off road use and non pollution controlled vehicles (1965 & older); however, it has not been tested or approved by the California Air Resources Board (CARB) for highway vehicles in the state of California. By purchasing this product, buyer agrees it will not be used on pollution controlled vehicles in California, or in a state with similar emissions regulations. FAQ Q1: What is the material and finish of the SPELAB Typhoon 351W Intake Manifold? A1:The SPELAB Typhoon Intake Manifold is cast from lightweight aluminum and features a satin finish. This material choice ensures both durability and reduced overall weight, while the satin finish provides a clean, professional appearance. Q2: What type of camshaft is best suited for the SPELAB Typhoon Intake Manifold? A2:The SPELAB Typhoon Intake Manifold is ideal for use with an aggressive street camshaft. Its long runner dual-plane design provides the best balance of power, especially when paired with a performance camshaft, improving both top-end power and low-end torque. Q3: Can the SPELAB Typhoon Intake Manifold be used with a stock distributor? A3:No, the SPELAB Typhoon Intake Manifold is not compatible with a stock distributor. For proper fitment, an aftermarket distributor will be required due to its design and clearance needs. Q4: What kind of performance gains can I expect from the SPELAB Typhoon Intake Manifold? A4:The SPELAB Typhoon Intake Manifold is designed to significantly enhance both top-end power and low-end torque. Its dual-plane, long runner design helps optimize airflow, providing substantial improvements in performance for street-driven vehicles and making it an ideal choice for high-performance applications. Q5: Is the SPELAB Typhoon Intake Manifold suitable for street legal use? A5:Yes, the SPELAB Typhoon Intake Manifold is designed for street performance and is legal for use in most street applications. { "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [ { "@type": "Question", "name": "What is the material and finish of the SPELAB Typhoon 351W Intake Manifold?", "acceptedAnswer": { "@type": "Answer", "text": "The SPELAB Typhoon Intake Manifold is cast from lightweight aluminum and features a satin finish. This material choice ensures both durability and reduced overall weight, while the satin finish provides a clean, professional appearance." } }, { "@type": "Question", "name": "What type of camshaft is best suited for the SPELAB Typhoon Intake Manifold?", "acceptedAnswer": { "@type": "Answer", "text": "The SPELAB Typhoon Intake Manifold is ideal for use with an aggressive street camshaft. Its long runner dual-plane design provides the best balance of power, especially when paired with a performance camshaft, improving both top-end power and low-end torque." } }, { "@type": "Question", "name": "Can the SPELAB Typhoon Intake Manifold be used with a stock distributor?", "acceptedAnswer": { "@type": "Answer", "text": "No, the SPELAB Typhoon Intake Manifold is not compatible with a stock distributor. For proper fitment, an aftermarket distributor will be required due to its design and clearance needs." } }, { "@type": "Question", "name": "What kind of performance gains can I expect from the SPELAB Typhoon Intake Manifold?", "acceptedAnswer": { "@type": "Answer", "text": "The SPELAB Typhoon Intake Manifold is designed to significantly enhance both top-end power and low-end torque. Its dual-plane, long runner design helps optimize airflow, providing substantial improvements in performance for street-driven vehicles and making it an ideal choice for high-performance applications." } }, { "@type": "Question", "name": "Is the SPELAB Typhoon Intake Manifold suitable for street legal use?", "acceptedAnswer": { "@type": "Answer", "text": "Yes, the SPELAB Typhoon Intake Manifold is designed for street performance and is legal for use in most street applications." } } ] }

Chevy Small Block Dual Plane Intake Manifold | Fits 1955-1986 Chevy Small Block Engines | SPELAB SPELAB's dual-plane high-performance intake manifold for the small block Chevy is ideal for street performance applications. With a design that improves throttle response, as well as power and torque over a wide rpm range - idle to 5,500. It is cast from lightweight aluminum and features a low profile for ideal hood clearance. Additional provisions include dual distributor hold-downs, 4 corner water ports, and a choke block-off kit. Set up for spread bore carbs, this manifold comes with an adapter plate and gasket for use with square bore types. Fits: 1955-86 Small Block Chevy 262-265-267-283-302-307-327-350-400 V8 Engines. Features dual-plane design with a black finish. Features Also Fits 1987-Up stock aluminum heads (does not fit 1987-Up cast iron or Chevrolet Bow Tie heads) Designed for 23 Degree Heads with Standard Port Location Cast Aluminum Satin/As-Cast Finish Mid-Rise Dual Plane Design 4150/4160 Square Bore Carburetor Flange Idle to 5500 RPM Port exit dimensions: 1.170" x 1.90" Estimated runner length - Shortest: 4" Estimated runner length - Longest: 7" Manifold height: Short Side 4.290", Tall Side 5.310" Accepts late model choke, water neck, AC, alternator and HEI Distributor No Provision for Divorced or Heated Choke Fitment CHEVROLET SMALL BLOCK V8 GEN. I 4.3 L / 262 in3 4.3 L / 265 in3 4.4 L / 267 in3 4.6 L / 283 in3 4.9 L / 302 in3 5.0 L / 305 in3 5.0 L / 307 in3 5.4 L / 327 in3 5.7 L / 350 in3 6.6 L / 400 in3 NOTES: Fits 1955-1986 Chevy small blocks and 1987-1995 with included adapters Manifold is stock replacement and street legal with non-EGR 302, 327, and 350 engines with OEM carb in 1966-1972 (and 1973 non-CA) passenger cars and 1966-1983 trucks Will not fit engines with reverse flow heads such as those found in 1992-1997 LT1 applications ALERT This product is legal for off road use and non pollution controlled vehicles (1965 & older); however, it has not been tested or approved by the California Air Resources Board (CARB) for highway vehicles in the state of California. By purchasing this product, buyer agrees it will not be used on pollution controlled vehicles in California, or in a state with similar emissions regulations.

---tab Description--- Description The SPELAB 2007-2024 6.7L Dodge Ram Intake Manifold/Horn enhances performance for 2007-2024 6.7L Dodge Ram engines with improved airflow and durability. Compatible with our EGR Delete Kit, it offers easy installation and performance whether or not the EGR is deleted. Designed with heating element provisions, you can seal the ports in warm weather or install them in colder conditions. Available in black, silver, and red, it delivers reliable performance and customization for your engine. Key Features Hassle-Free Installation: Designed for a direct fit with stock mounting points, ensuring a hassle-free installation. This upgrade doesn't require any additional tuning or modifications. Enhanced Airflow Design: Featuring a more prominent SPELAB logo, the intake manifold provides increased internal space, improving air intake for better engine performance. Precision Fit: The top cover design is expertly crafted to integrate seamlessly with the SPELAB EGR Plate, ensuring a snug fit and optimized performance. 45-Degree Sensor Port: The manifold includes a new 45-degree angled sensor connector located at the front, allowing for easy access and precise sensor installation. Advanced Stud Design: Our unique stud design extends to the exterior of the intake cylinder block with a sophisticated three-dimensional concave structure, ensuring a secure and efficient installation. Sensor & Boost-Ready: Features four 1/8” NPT threaded ports, easily install boost gauges, sensors, or other performance add-ons. Compact and Efficient: The manifold’s smaller bend angle and near 180-degree parallel alignment reduce airflow restriction, while the lower overall height enhances under-hood clearance and airflow dynamics. Enhanced Airflow with SPELAB 2007-2024 6.7 Dodge Ram Intake Manifold Upgrade The SPELAB 2007-2024 6.7 Dodge Ram intake horn is engineered to significantly increase airflow into your engine. It features a larger, unrestricted design compared to the stock intake manifold, allowing for more oxygen-rich air to reach the engine cylinders. This not only improves combustion but also boosts overall performance. In fact, this upgrade delivers an impressive 88% increase in airflow, ensuring that your engine operates at peak efficiency. 2X OEM Diameter For Dodge Ram engine requires substantial airflow, but the restrictive OEM air intake limits performance. SPELAB’s larger, high-flow intake horn—double the size of the OEM—eliminates airflow restrictions and prevents boost loss, allowing for smooth, unrestricted air delivery. Boost Performance and Fuel Efficiency The SPELAB 2007-2024 6.7 Dodge Ram High-Flow Intake Manifold/Trumpet is designed to enhance engine air intake efficiency. Its streamlined, unobstructed structure significantly increases airflow, boosting engine performance. Unlike the factory heat shields, which are prone to carbon buildup and blockage over time, SPELAB’s innovative use of heating elements replaces traditional heating methods, effectively preventing blockages while maintaining optimal performance. This product is the ideal choice for improving engine power and reliability. Specifications Material Cast Aluminum Alloy Weight 4.2 kg (9.26 lbs) Package Dimensions 37 × 27 × 24.5 cm (14.6 × 10.6 × 9.6 inches) Manifold Inlet Size 3-3/8 inch Installation Type Direct Bolt-On (No Modifications Required) Ports Included 4 × 1/8" NPT Threaded Ports Heating Element Included No (Heating element must be purchased separately if needed.) Tuning Requirement Not Required Fuel System Compatibility Fully compatible with OEM fuel lines & emission equipment Heating Element Usage The heating element is optional and only necessary when operating in temperatures below 0°C (32°F). Fitment 2007-2024 6.7 Dodge Ram intake manifold/Horn: Dodge Ram 2500/3500 6.7L Diesel Intake manifold kit for chassis cab: 2013-2018 Dodge Ram 3500-5500 6.7L Chassis-Cab Only (Also Fits Dual-Alternator Engines) Grid Heater Delete Plate: 2007-2024 Dodge Ram 2500/3500 6.7L Dodge Ram Diesel Installation SPELAB Intake Manifold For 2013-2024 6.7L Dodge Ram ---tab Why SPELAB--- Benefits of Upgrading to SPELAB 2007-2024 6.7 Dodge Ram Intake Manifold Increased Air Density and Boost Efficiency This 2007-2024 6.7 Dodge Ram intake manifold upgrade increases air density by improving airflow to the cylinders, leading to more efficient combustion and higher boost efficiency. With its unique design, the SPELAB manifold allows your engine to handle higher boost levels without adding stress to the turbine, ensuring smoother, more reliable performance. This means better performance for towing, off-roading, or high-speed driving. Faster Throttle Response and Better Combustion The SPELAB 2007-2024 6.7 Dodge Ram intake manifold upgrade also helps deliver faster throttle response by allowing more air into the engine quicker. This provides more immediate power delivery, making your truck feel more responsive and easier to control, whether you're accelerating on the highway or navigating tough off-road conditions. Easy Installation and Compatibility with for 6.7 Dodge Ram Hassle-Free Installation The SPELAB 2007-2024 6.7 Dodge Ram intake manifold upgrade is designed for a direct fit with stock mounting points, ensuring a hassle-free installation. This upgrade doesn't require any additional tuning or modifications. The package includes all necessary hardware, such as paper gaskets, washers, bolts, and a proprietary fuel line, ensuring a smooth and seamless installation process. Stock Compatibility This for Dodge Ram intake manifold upgrade is fully compatible with your engine’s existing components, ensuring a seamless fit without requiring any additional modifications. It also comes with a robust 3-3/8 inch inlet and four 1/8 inch NPT ports, allowing for flexible sensor integration and easy customization to suit your specific performance needs. SPELAB Intake Manifold Upgrade Materials and Options Durable Aluminum Alloy Construction The SPELAB 2007-2024 6.7 Dodge Ram intake manifold is crafted from high-grade aluminum alloy, offering superior durability and heat resistance. This ensures that the manifold can withstand the rigors of high-performance driving while maintaining consistent performance, even under extreme conditions. Finish Options to Match Your Engine Bay Available in three stunning finish options—Red powder-coated, Black, and Raw—the SPELAB for 6.7 Dodge Ram intake manifold upgrade allows you to customize the look of your engine bay while improving performance. Whether you're looking for a sleek, subtle look or something that stands out, SPELAB has the right option for you. Experience the Full Potential of Your 2007-2024 6.7L Dodge Ram Engine with SPELAB With the SPELAB 2007-2024 6.7 Dodge Ram intake manifold, you're not just upgrading a component—you're enhancing the entire driving experience. From faster throttle response to improved fuel efficiency, this for Cummins intake manifold upgrade delivers real-world benefits you can feel every time you drive. Unlock the full potential of your Cummins engine and elevate your truck’s performance today. Additionally, the SPELAB 2007-2024 6.7 Dodge Ram intake manifold/Horn is perfectly compatible with our EGR Delete Kit,CCV Delete Kit,Valve Cover,Oil Catch Can ,Intercooler Pipe Kit and Intercooler further unleashing your engine's potential for superior power output when used together. ---tab FAQ--- FAQs Q: Will I need to retune my engine after installing the SPELAB intake manifold?A: No, the SPELAB 2007-2024 6.7 Dodge Ram intake manifold upgrade is designed for a direct fit without requiring additional tuning. Q: Is this intake manifold compatible with my 2019 Dodge Ram 2500?A: Yes, the SPELAB 2007-2024 6.7 Dodge Ram intake manifold is compatible with all Dodge Ram 2500/3500 models from 2007 to 2024. Q: How much horsepower can I expect to gain from this upgrade?A: Depending on your engine’s condition and current modifications, you can expect to see up to 15% more horsepower after installing the SPELAB 2007-2024 6.7 Dodge Ram intake manifold upgrade. Q: How much HP can you get from an intake manifold upgrade?A: The horsepower gains from an intake manifold upgrade can vary, but typically you can expect an increase of 10-20 HP, depending on the specific design and engine tuning. Q: How can I increase the performance of my for 6.7 Dodge Ram?A: You can increase the performance of your 2007-2024 6.7 Dodge Ram by upgrading the intake manifold, adding a performance exhaust system, installing a better turbocharger, and tuning the engine for optimal performance. Q: What are the benefits of upgrading the intake manifold?A: Upgrading the intake manifold improves airflow, increases engine efficiency, enhances throttle response, and can lead to better fuel economy and higher horsepower. Q: Is the SPELAB 2007-2024 6.7 Dodge Ram intake manifold compatible with my stock engine setup?A: Yes, the SPELAB 2007-2024 intake manifold is designed to be compatible with stock engine setups for Dodge Ram 2500/3500 models from 2007 to 2024, making installation straightforward without requiring additional modifications. Q: Do I need to tune my engine after upgrading the intake manifold?A: While tuning can further optimize performance, the SPELAB 2007-2024 6.7 Dodge Ram intake manifold provides noticeable improvements without requiring engine tuning. Q: How does the SPELAB intake manifold improve fuel efficiency?A: The SPELAB intake manifold increases air density and improves combustion efficiency, which can lead to better fuel economy, especially during heavy towing or long-distance driving. Q: Can I install the SPELAB 2007-2024 6.7 Dodge Ram intake manifold myself?A: Yes, the SPELAB intake manifold comes with a complete installation kit, including hardware and instructions, making it suitable for DIY installation. Q: What material is the SPELAB intake manifold made of?A: The SPELAB 2007-2024 6.7 Dodge Ram intake manifold is made from high-quality aluminum alloy, offering superior durability and heat resistance. Q: Does upgrading my intake manifold affect other parts of my engine?A: Upgrading your intake manifold enhances airflow and engine performance without negatively affecting other parts. It’s designed to work seamlessly with stock components. Q: How can I tell if the heater bolts are faulty?A: Look for difficulties during cold starts, such as white smoke or unusual noises. Inspect the bolts for cracks, looseness, or signs of corrosion on the surface. Q: How does the SPELAB 2007-2024 6.7L Dodge Ram intake manifold upgrade prevent heater bolt failure?A: The intake manifold optimizes airflow, improves combustion efficiency, and reduces carbon buildup, thereby lowering the risk of heater bolt damage. Q: Is it safe to completely remove the heater bolts?A: In warmer climates, completely removing the heater bolts will not affect engine starting performance. In colder regions, it is recommended to install spiral heaters and optimize the intake system to ensure smooth engine starts during winter. Q: How can I prevent heater bolt breakage?A: Regularly inspect and use high-quality alloy bolts. SPELAB’s delete plate optimization design fundamentally eliminates the issue of bolt detachment. Q: What are the main advantages of the SPELAB modification?A: It eliminates the risk of heater bolt breakage. By combining spiral heaters, the engine will still start smoothly even under cold conditions. Shop 6.7 cummins intake horn with heater and Explore our complete collection of 6.7 Cummins intake horn to find the perfect upgrade for your truck. ---tab Blog & Video--- Video Prevent Grid Heater Failure: SPELAB Intake Manifold & Delete Install Learn how to prevent grid heater failure by installing a SPELAB intake manifold, EGR delete, and exhaust on a 2007-2024 6.7 Dodge Ram. Failure PreventionInstallation Guide Avoid Engine Failure: Grid Heater Delete & SPELAB Intake Horn Upgrade Discover how to prevent engine failure with a grid heater delete and SPELAB intake horn upgrade for improved airflow and performance. Failure Prevention Installation Guide Engine Protection Resolve Failing Bolt Issues: SPELAB Intake Horn Install & Grid Heater Delete Watch the installation of a SPELAB intake manifold and grid heater delete, addressing common failing bolt issues that can lead to engine failure. Troubleshooting Guide Installation Guide Engine Repair Fix Failing Bolt: 6.7 Dodge Ram Grid Heater Delete to Prevent Engine Failure Learn to prevent 6.7 Dodge Ram grid heater failing bolt issues and subsequent engine failure with this detailed installation guide. Repair Guide Failure Prevention Boost Performance: Improve Airflow with 6.7 Dodge Ram Upgrades See how installing a grid heater delete, EGR delete, and intake manifold significantly improves airflow and prevents 6.7 Dodge Ram engine issues. Installation Guide Airflow Improvement Compare Performance: Stock vs. SPELAB Intake Horn Join a two-week road trip comparing a stock intake horn with the SPELAB version, alongside truck builds and car shows. Comparison Video Review ×

---tab Description--- Description Unlock the full potential of your 2009–2024 Dodge Ram 2500/3500 6.7L with the SPELAB Performance Package — combining the EGR Delete Kit and High-Flow Intake Manifold. Designed for performance enthusiasts, this upgrade delivers enhanced airflow, improved engine efficiency, and unmatched durability. With precision-engineered components like the CNC-machined intake block plate, integrated DDC bracket, and oversized intake horn, you’ll experience faster throttle response, cooler engine temperatures, and superior fuel economy — all while giving your engine bay a premium, polished look. Perfect for drivers who demand the best from their trucks, whether on the highway, job site, or off-road. Kit Includes: SPELAB Intake Manifold/Horn SPELAB Grid Heater Delete SPELAB EGR Delete Kit SPELAB EGR Throttle Valve Delete Fitment: 2009-2024 Dodge Ram 2500/3500 6.7L Diesel. Not compatible with Cab & Chassis (C&C) models. Key Features: Integrated DDC Base Pipe Bracket: Directly mounts onto the engine without the need for exhaust studs, simplifying installation and enhancing durability. CNC-Machined Aluminum Intake Block Plate: Features a polished finish and engraved logo, combining durability with a premium aesthetic in your engine bay. Oversized High-Flow Intake Manifold: 88% increased airflow over stock, delivering more oxygen to the cylinders for better combustion and power. Optimized Airflow & Boost Efficiency: Reduces pressure drop and prevents boost loss, improving engine response under load. 45-Degree Angled Sensor Port: Allows for easier sensor installation and maintenance thanks to the new forward-facing, angled sensor connector. Advanced Stud and Compact Design: Three-dimensional concave stud structure ensures secure mounting, while the near 180-degree bend reduces restrictions and improves under-hood clearance. Boosted Performance and Fuel Efficiency: Removes EGR restrictions and maximizes air intake, delivering faster throttle response, better fuel economy, and more consistent performance, whether towing, off-roading, or daily driving. Durable Aluminum Construction with Finish Options: Crafted from premium aluminum alloy, available in Red powder-coated, Black, or Raw finishes to match your engine bay’s look. Specifications: Application EGR Delete + High-Flow Intake Manifold Kit for 6.7L Dodge Ram Materials CNC-machined aluminum (EGR block plate), cast aluminum alloy (intake manifold) Manifold Inlet Size 3-3/8 inch Sensor Ports Four 1/8 inch NPT ports for flexible integration Installation SPELAB Intake Manifold For 2013-2018 6.7L Dodge Ram SPELAB EGR Delete Kit For 2009-2024 6.7L Dodge Ram ---tab FAQ--- FAQs Q: What makes the SPELAB EGR Delete Kit unique?A: The SPELAB EGR Delete Kit features a custom CNC-machined aluminum intake block plate with a sleek polished finish and an exclusive engraved logo. Its unique design not only enhances functionality but also makes it a collectible-grade accessory for diesel enthusiasts. Q: Why is the model year compatibility listed as 2009-2024 instead of 2009.5-2024?A: To prevent any confusion for customers, the compatibility range was simplified to 2009-2024. This ensures accuracy, as the kit is specifically designed to fit 2009+ Ram 2500/3500 models with the 6.7L Dodge Ram engine. It is not suitable for Cab & Chassis (C&C) models. Q: How does the DDC bracket improve installation?A: The integrated DDC base pipe bracket eliminates the need for exhaust studs, making the installation process faster and more straightforward. This innovative feature ensures a precise and secure fit, saving time and effort. Q: Is this EGR Delete Kit designed to work with other SPELAB products?A: Yes, this kit is specifically engineered to perfectly complement SPELAB’s 6.7 Dodge Ram intake manifold. Together, they deliver optimal performance, durability, and a seamless upgrade experience for your engine bay. Q: Can the SPELAB EGR Delete Kit enhance the aesthetics of my engine bay?A: Absolutely! The polished CNC-machined aluminum block plate with its engraved logo not only provides superior durability but also adds a premium, upgraded look to your engine bay, setting your vehicle apart. Q: Will I need to retune my engine after installing the SPELAB intake manifold?A: No, the SPELAB for 6.7 Dodge Ram intake manifold upgrade is designed for a direct fit without requiring additional tuning. Q: Is this intake manifold compatible with my 2019 Dodge Ram 2500?A: Yes, the SPELAB for 6.7 Dodge Ram intake manifold is compatible with all Dodge Ram 2500/3500 models from 2007 to 2024. Q: How much horsepower can I expect to gain from this upgrade?A: Depending on your engine’s condition and current modifications, you can expect to see up to 15% more horsepower after installing the SPELAB for 6.7 Dodge Ram intake manifold upgrade. Q: How much HP can you get from an intake manifold upgrade?A: The horsepower gains from an intake manifold upgrade can vary, but typically you can expect an increase of 10-20 HP, depending on the specific design and engine tuning. Q: How can I increase the performance of my for 6.7 Dodge Ram?A: You can increase the performance of your for 6.7 Dodge Ram by upgrading the intake manifold, adding a performance exhaust system, installing a better turbocharger, and tuning the engine for optimal performance. Q: What are the benefits of upgrading the intake manifold?A: Upgrading the intake manifold improves airflow, increases engine efficiency, enhances throttle response, and can lead to better fuel economy and higher horsepower. Q: Is the SPELAB for 6.7 Dodge Ram intake manifold compatible with my stock engine setup?A: Yes, the SPELAB intake manifold is designed to be compatible with stock engine setups for Dodge Ram 2500/3500 models from 2007 to 2024, making installation straightforward without requiring additional modifications. Q: Do I need to tune my engine after upgrading the intake manifold?A: While tuning can further optimize performance, the SPELAB for 6.7 Dodge Ram intake manifold provides noticeable improvements without requiring engine tuning. Q: How does the SPELAB intake manifold improve fuel efficiency?A: The SPELAB intake manifold increases air density and improves combustion efficiency, which can lead to better fuel economy, especially during heavy towing or long-distance driving. Q: Can I install the SPELAB for 6.7 Dodge Ram intake manifold myself?A: Yes, the SPELAB intake manifold comes with a complete installation kit, including hardware and instructions, making it suitable for DIY installation. Q: What material is the SPELAB intake manifold made of?A: The SPELAB for 6.7 Dodge Ram intake manifold is made from high-quality aluminum alloy, offering superior durability and heat resistance. Q: Does upgrading my intake manifold affect other parts of my engine?A: Upgrading your intake manifold enhances airflow and engine performance without negatively affecting other parts. It’s designed to work seamlessly with stock components. Q: How can I tell if the heater bolts are faulty?A: Look for difficulties during cold starts, such as white smoke or unusual noises. Inspect the bolts for cracks, looseness, or signs of corrosion on the surface. Q: How does the SPELAB 6.7L Dodge Ram intake manifold upgrade prevent heater bolt failure?A: The intake manifold optimizes airflow, improves combustion efficiency, and reduces carbon buildup, thereby lowering the risk of heater bolt damage. Q: Is it safe to completely remove the heater bolts?A: In warmer climates, completely removing the heater bolts will not affect engine starting performance. In colder regions, it is recommended to install spiral heaters and optimize the intake system to ensure smooth engine starts during winter. Q: How can I prevent heater bolt breakage?A: Regularly inspect and use high-quality alloy bolts. SPELAB’s delete plate optimization design fundamentally eliminates the issue of bolt detachment. Q: What are the main advantages of the SPELAB modification?A: It eliminates the risk of heater bolt breakage. By combining spiral heaters, the engine will still start smoothly even under cold conditions. ---tab Shipping & Returns--- Fast Shipping Policy Your order will be dispatched within 1-2 business days, and the package will arrive within your order's estimated date. Click for Shipping Policy Easy Return Policy Every order comes with a 14-day free return, which means you don't have to pay for a return slip. Click for Return Policy ---tab Blog & Video--- Video 6.7 Dodge Ram: Full Performance Mod Install! Watch a detailed, step-by-step installation of SPELAB parts on a 6.7 Dodge Ram truck. Upgrade its performance, sound, and reliability. Before & After Review Sound Test See How It's Done: 6.7 Dodge Ram Performance Installation Watch this 6.7 Dodge Ram truck transform with intake, exhaust, EGR, and grid heater delete installs. See the massive performance boost! Installation Guide Before & After Review See the Installation: SPELAB Intake Horn & Grid Heater Delete Watch the detailed process of installing an SPELAB intake horn and grid heater delete on a 6.7 Dodge Ram, including a product review. Installation Guide Review Performance Upgrade See the Upgrade: SPELAB RAM 2500 Dodge Ram Intake Horn Installation Discover the amazing results of installing a SPELAB intake horn on a RAM 2500 Dodge Ram. This video includes installation tips and a review! Installation Guide Review Discover the Difference: Dodge Ram Engine Power Improvements Explore how this Dodge Ram engine's power is dramatically improved with an EGR delete, grid heater delete, and new intake manifold. Performance Showcase Review × { "@context": "https://schema.org", "@type": "Offer", "discountCode": "OPEN10", "discountValue": "10%", "availabilityStarts": "2025-09-30" }

---tab Description--- Description The SPELAB 2007-2024 6.7L Dodge Ram Intake Manifold/Horn enhances performance for 2007-2024 6.7L Dodge Ram engines with improved airflow and durability. Compatible with our EGR Delete Kit, it offers easy installation and performance whether or not the EGR is deleted. Designed with heating element provisions, you can seal the ports in warm weather or install them in colder conditions. Available in black, silver, and red, it delivers reliable performance and customization for your engine. Key Features Hassle-Free Installation: Designed for a direct fit with stock mounting points, ensuring a hassle-free installation. This upgrade doesn't require any additional tuning or modifications. Enhanced Airflow Design: Featuring a more prominent SPELAB logo, the intake manifold provides increased internal space, improving air intake for better engine performance. Precision Fit: The top cover design is expertly crafted to integrate seamlessly with the SPELAB EGR Plate, ensuring a snug fit and optimized performance. 45-Degree Sensor Port: The manifold includes a new 45-degree angled sensor connector located at the front, allowing for easy access and precise sensor installation. Advanced Stud Design: Our unique stud design extends to the exterior of the intake cylinder block with a sophisticated three-dimensional concave structure, ensuring a secure and efficient installation. Sensor & Boost-Ready: Features four 1/8” NPT threaded ports, easily install boost gauges, sensors, or other performance add-ons. Compact and Efficient: The manifold’s smaller bend angle and near 180-degree parallel alignment reduce airflow restriction, while the lower overall height enhances under-hood clearance and airflow dynamics. Enhanced Airflow with SPELAB 2007-2024 6.7 Dodge Ram Intake Manifold Upgrade The SPELAB 2007-2024 6.7 Dodge Ram intake horn is engineered to significantly increase airflow into your engine. It features a larger, unrestricted design compared to the stock intake manifold, allowing for more oxygen-rich air to reach the engine cylinders. This not only improves combustion but also boosts overall performance. In fact, this upgrade delivers an impressive 88% increase in airflow, ensuring that your engine operates at peak efficiency. 2X OEM Diameter For Dodge Ram engine requires substantial airflow, but the restrictive OEM air intake limits performance. SPELAB’s larger, high-flow intake horn—double the size of the OEM—eliminates airflow restrictions and prevents boost loss, allowing for smooth, unrestricted air delivery. Boost Performance and Fuel Efficiency The SPELAB 2007-2024 6.7 Dodge Ram High-Flow Intake Manifold/Trumpet is designed to enhance engine air intake efficiency. Its streamlined, unobstructed structure significantly increases airflow, boosting engine performance. Unlike the factory heat shields, which are prone to carbon buildup and blockage over time, SPELAB’s innovative use of heating elements replaces traditional heating methods, effectively preventing blockages while maintaining optimal performance. This product is the ideal choice for improving engine power and reliability. Specifications Material Cast Aluminum Alloy Weight 4.2 kg (9.26 lbs) Package Dimensions 37 × 27 × 24.5 cm (14.6 × 10.6 × 9.6 inches) Manifold Inlet Size 3-3/8 inch Installation Type Direct Bolt-On (No Modifications Required) Ports Included 4 × 1/8" NPT Threaded Ports Heating Element Included No (Heating element must be purchased separately if needed.) Tuning Requirement Not Required Fuel System Compatibility Fully compatible with OEM fuel lines & emission equipment Heating Element Usage The heating element is optional and only necessary when operating in temperatures below 0°C (32°F). Fitment 2007-2024 6.7 Dodge Ram intake manifold/Horn: Dodge Ram 2500/3500 6.7L Diesel Intake manifold kit for chassis cab: 2013-2018 Dodge Ram 3500-5500 6.7L Chassis-Cab Only (Also Fits Dual-Alternator Engines) Grid Heater Delete Plate: 2007-2024 Dodge Ram 2500/3500 6.7L Dodge Ram Diesel Installation SPELAB Intake Manifold For 2013-2024 6.7L Dodge Ram ---tab Why SPELAB--- Benefits of Upgrading to SPELAB 2007-2024 6.7 Dodge Ram Intake Manifold Increased Air Density and Boost Efficiency This 2007-2024 6.7 Dodge Ram intake manifold upgrade increases air density by improving airflow to the cylinders, leading to more efficient combustion and higher boost efficiency. With its unique design, the SPELAB manifold allows your engine to handle higher boost levels without adding stress to the turbine, ensuring smoother, more reliable performance. This means better performance for towing, off-roading, or high-speed driving. Faster Throttle Response and Better Combustion The SPELAB 2007-2024 6.7 Dodge Ram intake manifold upgrade also helps deliver faster throttle response by allowing more air into the engine quicker. This provides more immediate power delivery, making your truck feel more responsive and easier to control, whether you're accelerating on the highway or navigating tough off-road conditions. Easy Installation and Compatibility with for 6.7 Dodge Ram Hassle-Free Installation The SPELAB 2007-2024 6.7 Dodge Ram intake manifold upgrade is designed for a direct fit with stock mounting points, ensuring a hassle-free installation. This upgrade doesn't require any additional tuning or modifications. The package includes all necessary hardware, such as paper gaskets, washers, bolts, and a proprietary fuel line, ensuring a smooth and seamless installation process. Stock Compatibility This for Dodge Ram intake manifold upgrade is fully compatible with your engine’s existing components, ensuring a seamless fit without requiring any additional modifications. It also comes with a robust 3-3/8 inch inlet and four 1/8 inch NPT ports, allowing for flexible sensor integration and easy customization to suit your specific performance needs. SPELAB Intake Manifold Upgrade Materials and Options Durable Aluminum Alloy Construction The SPELAB 2007-2024 6.7 Dodge Ram intake manifold is crafted from high-grade aluminum alloy, offering superior durability and heat resistance. This ensures that the manifold can withstand the rigors of high-performance driving while maintaining consistent performance, even under extreme conditions. Finish Options to Match Your Engine Bay Available in three stunning finish options—Red powder-coated, Black, and Raw—the SPELAB for 6.7 Dodge Ram intake manifold upgrade allows you to customize the look of your engine bay while improving performance. Whether you're looking for a sleek, subtle look or something that stands out, SPELAB has the right option for you. Experience the Full Potential of Your 2007-2024 6.7L Dodge Ram Engine with SPELAB With the SPELAB 2007-2024 6.7 Dodge Ram intake manifold, you're not just upgrading a component—you're enhancing the entire driving experience. From faster throttle response to improved fuel efficiency, this for Cummins intake manifold upgrade delivers real-world benefits you can feel every time you drive. Unlock the full potential of your Cummins engine and elevate your truck’s performance today. Additionally, the SPELAB 2007-2024 6.7 Dodge Ram intake manifold/Horn is perfectly compatible with our EGR Delete Kit,CCV Delete Kit,Valve Cover,Oil Catch Can ,Intercooler Pipe Kit and Intercooler further unleashing your engine's potential for superior power output when used together. ---tab FAQ--- FAQs Q: Will I need to retune my engine after installing the SPELAB intake manifold?A: No, the SPELAB 2007-2024 6.7 Dodge Ram intake manifold upgrade is designed for a direct fit without requiring additional tuning. Q: Is this intake manifold compatible with my 2019 Dodge Ram 2500?A: Yes, the SPELAB 2007-2024 6.7 Dodge Ram intake manifold is compatible with all Dodge Ram 2500/3500 models from 2007 to 2024. Q: How much horsepower can I expect to gain from this upgrade?A: Depending on your engine’s condition and current modifications, you can expect to see up to 15% more horsepower after installing the SPELAB 2007-2024 6.7 Dodge Ram intake manifold upgrade. Q: How much HP can you get from an intake manifold upgrade?A: The horsepower gains from an intake manifold upgrade can vary, but typically you can expect an increase of 10-20 HP, depending on the specific design and engine tuning. Q: How can I increase the performance of my for 6.7 Dodge Ram?A: You can increase the performance of your 2007-2024 6.7 Dodge Ram by upgrading the intake manifold, adding a performance exhaust system, installing a better turbocharger, and tuning the engine for optimal performance. Q: What are the benefits of upgrading the intake manifold?A: Upgrading the intake manifold improves airflow, increases engine efficiency, enhances throttle response, and can lead to better fuel economy and higher horsepower. Q: Is the SPELAB 2007-2024 6.7 Dodge Ram intake manifold compatible with my stock engine setup?A: Yes, the SPELAB 2007-2024 intake manifold is designed to be compatible with stock engine setups for Dodge Ram 2500/3500 models from 2007 to 2024, making installation straightforward without requiring additional modifications. Q: Do I need to tune my engine after upgrading the intake manifold?A: While tuning can further optimize performance, the SPELAB 2007-2024 6.7 Dodge Ram intake manifold provides noticeable improvements without requiring engine tuning. Q: How does the SPELAB intake manifold improve fuel efficiency?A: The SPELAB intake manifold increases air density and improves combustion efficiency, which can lead to better fuel economy, especially during heavy towing or long-distance driving. Q: Can I install the SPELAB 2007-2024 6.7 Dodge Ram intake manifold myself?A: Yes, the SPELAB intake manifold comes with a complete installation kit, including hardware and instructions, making it suitable for DIY installation. Q: What material is the SPELAB intake manifold made of?A: The SPELAB 2007-2024 6.7 Dodge Ram intake manifold is made from high-quality aluminum alloy, offering superior durability and heat resistance. Q: Does upgrading my intake manifold affect other parts of my engine?A: Upgrading your intake manifold enhances airflow and engine performance without negatively affecting other parts. It’s designed to work seamlessly with stock components. Q: How can I tell if the heater bolts are faulty?A: Look for difficulties during cold starts, such as white smoke or unusual noises. Inspect the bolts for cracks, looseness, or signs of corrosion on the surface. Q: How does the SPELAB 2007-2024 6.7L Dodge Ram intake manifold upgrade prevent heater bolt failure?A: The intake manifold optimizes airflow, improves combustion efficiency, and reduces carbon buildup, thereby lowering the risk of heater bolt damage. Q: Is it safe to completely remove the heater bolts?A: In warmer climates, completely removing the heater bolts will not affect engine starting performance. In colder regions, it is recommended to install spiral heaters and optimize the intake system to ensure smooth engine starts during winter. Q: How can I prevent heater bolt breakage?A: Regularly inspect and use high-quality alloy bolts. SPELAB’s delete plate optimization design fundamentally eliminates the issue of bolt detachment. Q: What are the main advantages of the SPELAB modification?A: It eliminates the risk of heater bolt breakage. By combining spiral heaters, the engine will still start smoothly even under cold conditions. Shop 6.7 cummins intake horn with heater and Explore our complete collection of 6.7 Cummins intake horn to find the perfect upgrade for your truck. ---tab Blog & Video--- Video Prevent Grid Heater Failure: SPELAB Intake Manifold & Delete Install Learn how to prevent grid heater failure by installing a SPELAB intake manifold, EGR delete, and exhaust on a 2007-2024 6.7 Dodge Ram. Failure PreventionInstallation Guide Avoid Engine Failure: Grid Heater Delete & SPELAB Intake Horn Upgrade Discover how to prevent engine failure with a grid heater delete and SPELAB intake horn upgrade for improved airflow and performance. Failure Prevention Installation Guide Engine Protection Resolve Failing Bolt Issues: SPELAB Intake Horn Install & Grid Heater Delete Watch the installation of a SPELAB intake manifold and grid heater delete, addressing common failing bolt issues that can lead to engine failure. Troubleshooting Guide Installation Guide Engine Repair Fix Failing Bolt: 6.7 Dodge Ram Grid Heater Delete to Prevent Engine Failure Learn to prevent 6.7 Dodge Ram grid heater failing bolt issues and subsequent engine failure with this detailed installation guide. Repair Guide Failure Prevention Boost Performance: Improve Airflow with 6.7 Dodge Ram Upgrades See how installing a grid heater delete, EGR delete, and intake manifold significantly improves airflow and prevents 6.7 Dodge Ram engine issues. Installation Guide Airflow Improvement Compare Performance: Stock vs. SPELAB Intake Horn Join a two-week road trip comparing a stock intake horn with the SPELAB version, alongside truck builds and car shows. Comparison Video Review ×

---tab Description--- Description The SPELAB 2007-2024 6.7L Dodge Ram Intake Manifold/Horn enhances performance for 2007-2024 6.7L Dodge Ram engines with improved airflow and durability. Compatible with our EGR Delete Kit, it offers easy installation and performance whether or not the EGR is deleted. Designed with heating element provisions, you can seal the ports in warm weather or install them in colder conditions. Available in black, silver, and red, it delivers reliable performance and customization for your engine. Key Features Hassle-Free Installation: Designed for a direct fit with stock mounting points, ensuring a hassle-free installation. This upgrade doesn't require any additional tuning or modifications. Enhanced Airflow Design: Featuring a more prominent SPELAB logo, the intake manifold provides increased internal space, improving air intake for better engine performance. Precision Fit: The top cover design is expertly crafted to integrate seamlessly with the SPELAB EGR Plate, ensuring a snug fit and optimized performance. 45-Degree Sensor Port: The manifold includes a new 45-degree angled sensor connector located at the front, allowing for easy access and precise sensor installation. Advanced Stud Design: Our unique stud design extends to the exterior of the intake cylinder block with a sophisticated three-dimensional concave structure, ensuring a secure and efficient installation. Sensor & Boost-Ready: Features four 1/8” NPT threaded ports, easily install boost gauges, sensors, or other performance add-ons. Compact and Efficient: The manifold’s smaller bend angle and near 180-degree parallel alignment reduce airflow restriction, while the lower overall height enhances under-hood clearance and airflow dynamics. Enhanced Airflow with SPELAB 2007-2024 6.7 Dodge Ram Intake Manifold Upgrade The SPELAB 2007-2024 6.7 Dodge Ram intake horn is engineered to significantly increase airflow into your engine. It features a larger, unrestricted design compared to the stock intake manifold, allowing for more oxygen-rich air to reach the engine cylinders. This not only improves combustion but also boosts overall performance. In fact, this upgrade delivers an impressive 88% increase in airflow, ensuring that your engine operates at peak efficiency. 2X OEM Diameter For Dodge Ram engine requires substantial airflow, but the restrictive OEM air intake limits performance. SPELAB’s larger, high-flow intake horn—double the size of the OEM—eliminates airflow restrictions and prevents boost loss, allowing for smooth, unrestricted air delivery. Boost Performance and Fuel Efficiency The SPELAB 2007-2024 6.7 Dodge Ram High-Flow Intake Manifold/Trumpet is designed to enhance engine air intake efficiency. Its streamlined, unobstructed structure significantly increases airflow, boosting engine performance. Unlike the factory heat shields, which are prone to carbon buildup and blockage over time, SPELAB’s innovative use of heating elements replaces traditional heating methods, effectively preventing blockages while maintaining optimal performance. This product is the ideal choice for improving engine power and reliability. Specifications Material Cast Aluminum Alloy Weight 4.2 kg (9.26 lbs) Package Dimensions 37 × 27 × 24.5 cm (14.6 × 10.6 × 9.6 inches) Manifold Inlet Size 3-3/8 inch Installation Type Direct Bolt-On (No Modifications Required) Ports Included 4 × 1/8" NPT Threaded Ports Heating Element Included No (Heating element must be purchased separately if needed.) Tuning Requirement Not Required Fuel System Compatibility Fully compatible with OEM fuel lines & emission equipment Heating Element Usage The heating element is optional and only necessary when operating in temperatures below 0°C (32°F). Fitment 2007-2024 6.7 Dodge Ram intake manifold/Horn: Dodge Ram 2500/3500 6.7L Diesel Intake manifold kit for chassis cab: 2013-2018 Dodge Ram 3500-5500 6.7L Chassis-Cab Only (Also Fits Dual-Alternator Engines) Grid Heater Delete Plate: 2007-2024 Dodge Ram 2500/3500 6.7L Dodge Ram Diesel Installation SPELAB Intake Manifold For 2013-2024 6.7L Dodge Ram ---tab Why SPELAB--- Benefits of Upgrading to SPELAB 2007-2024 6.7 Dodge Ram Intake Manifold Increased Air Density and Boost Efficiency This 2007-2024 6.7 Dodge Ram intake manifold upgrade increases air density by improving airflow to the cylinders, leading to more efficient combustion and higher boost efficiency. With its unique design, the SPELAB manifold allows your engine to handle higher boost levels without adding stress to the turbine, ensuring smoother, more reliable performance. This means better performance for towing, off-roading, or high-speed driving. Faster Throttle Response and Better Combustion The SPELAB 2007-2024 6.7 Dodge Ram intake manifold upgrade also helps deliver faster throttle response by allowing more air into the engine quicker. This provides more immediate power delivery, making your truck feel more responsive and easier to control, whether you're accelerating on the highway or navigating tough off-road conditions. Easy Installation and Compatibility with for 6.7 Dodge Ram Hassle-Free Installation The SPELAB 2007-2024 6.7 Dodge Ram intake manifold upgrade is designed for a direct fit with stock mounting points, ensuring a hassle-free installation. This upgrade doesn't require any additional tuning or modifications. The package includes all necessary hardware, such as paper gaskets, washers, bolts, and a proprietary fuel line, ensuring a smooth and seamless installation process. Stock Compatibility This for Dodge Ram intake manifold upgrade is fully compatible with your engine’s existing components, ensuring a seamless fit without requiring any additional modifications. It also comes with a robust 3-3/8 inch inlet and four 1/8 inch NPT ports, allowing for flexible sensor integration and easy customization to suit your specific performance needs. SPELAB Intake Manifold Upgrade Materials and Options Durable Aluminum Alloy Construction The SPELAB 2007-2024 6.7 Dodge Ram intake manifold is crafted from high-grade aluminum alloy, offering superior durability and heat resistance. This ensures that the manifold can withstand the rigors of high-performance driving while maintaining consistent performance, even under extreme conditions. Finish Options to Match Your Engine Bay Available in three stunning finish options—Red powder-coated, Black, and Raw—the SPELAB for 6.7 Dodge Ram intake manifold upgrade allows you to customize the look of your engine bay while improving performance. Whether you're looking for a sleek, subtle look or something that stands out, SPELAB has the right option for you. Experience the Full Potential of Your 2007-2024 6.7L Dodge Ram Engine with SPELAB With the SPELAB 2007-2024 6.7 Dodge Ram intake manifold, you're not just upgrading a component—you're enhancing the entire driving experience. From faster throttle response to improved fuel efficiency, this for Cummins intake manifold upgrade delivers real-world benefits you can feel every time you drive. Unlock the full potential of your Cummins engine and elevate your truck’s performance today. Additionally, the SPELAB 2007-2024 6.7 Dodge Ram intake manifold/Horn is perfectly compatible with our EGR Delete Kit,CCV Delete Kit,Valve Cover,Oil Catch Can ,Intercooler Pipe Kit and Intercooler further unleashing your engine's potential for superior power output when used together. ---tab FAQ--- FAQs Q: Will I need to retune my engine after installing the SPELAB intake manifold?A: No, the SPELAB 2007-2024 6.7 Dodge Ram intake manifold upgrade is designed for a direct fit without requiring additional tuning. Q: Is this intake manifold compatible with my 2019 Dodge Ram 2500?A: Yes, the SPELAB 2007-2024 6.7 Dodge Ram intake manifold is compatible with all Dodge Ram 2500/3500 models from 2007 to 2024. Q: How much horsepower can I expect to gain from this upgrade?A: Depending on your engine’s condition and current modifications, you can expect to see up to 15% more horsepower after installing the SPELAB 2007-2024 6.7 Dodge Ram intake manifold upgrade. Q: How much HP can you get from an intake manifold upgrade?A: The horsepower gains from an intake manifold upgrade can vary, but typically you can expect an increase of 10-20 HP, depending on the specific design and engine tuning. Q: How can I increase the performance of my for 6.7 Dodge Ram?A: You can increase the performance of your 2007-2024 6.7 Dodge Ram by upgrading the intake manifold, adding a performance exhaust system, installing a better turbocharger, and tuning the engine for optimal performance. Q: What are the benefits of upgrading the intake manifold?A: Upgrading the intake manifold improves airflow, increases engine efficiency, enhances throttle response, and can lead to better fuel economy and higher horsepower. Q: Is the SPELAB 2007-2024 6.7 Dodge Ram intake manifold compatible with my stock engine setup?A: Yes, the SPELAB 2007-2024 intake manifold is designed to be compatible with stock engine setups for Dodge Ram 2500/3500 models from 2007 to 2024, making installation straightforward without requiring additional modifications. Q: Do I need to tune my engine after upgrading the intake manifold?A: While tuning can further optimize performance, the SPELAB 2007-2024 6.7 Dodge Ram intake manifold provides noticeable improvements without requiring engine tuning. Q: How does the SPELAB intake manifold improve fuel efficiency?A: The SPELAB intake manifold increases air density and improves combustion efficiency, which can lead to better fuel economy, especially during heavy towing or long-distance driving. Q: Can I install the SPELAB 2007-2024 6.7 Dodge Ram intake manifold myself?A: Yes, the SPELAB intake manifold comes with a complete installation kit, including hardware and instructions, making it suitable for DIY installation. Q: What material is the SPELAB intake manifold made of?A: The SPELAB 2007-2024 6.7 Dodge Ram intake manifold is made from high-quality aluminum alloy, offering superior durability and heat resistance. Q: Does upgrading my intake manifold affect other parts of my engine?A: Upgrading your intake manifold enhances airflow and engine performance without negatively affecting other parts. It’s designed to work seamlessly with stock components. Q: How can I tell if the heater bolts are faulty?A: Look for difficulties during cold starts, such as white smoke or unusual noises. Inspect the bolts for cracks, looseness, or signs of corrosion on the surface. Q: How does the SPELAB 2007-2024 6.7L Dodge Ram intake manifold upgrade prevent heater bolt failure?A: The intake manifold optimizes airflow, improves combustion efficiency, and reduces carbon buildup, thereby lowering the risk of heater bolt damage. Q: Is it safe to completely remove the heater bolts?A: In warmer climates, completely removing the heater bolts will not affect engine starting performance. In colder regions, it is recommended to install spiral heaters and optimize the intake system to ensure smooth engine starts during winter. Q: How can I prevent heater bolt breakage?A: Regularly inspect and use high-quality alloy bolts. SPELAB’s delete plate optimization design fundamentally eliminates the issue of bolt detachment. Q: What are the main advantages of the SPELAB modification?A: It eliminates the risk of heater bolt breakage. By combining spiral heaters, the engine will still start smoothly even under cold conditions. Shop 6.7 cummins intake horn with heater and Explore our complete collection of 6.7 Cummins intake horn to find the perfect upgrade for your truck. ---tab Blog & Video--- Video Prevent Grid Heater Failure: SPELAB Intake Manifold & Delete Install Learn how to prevent grid heater failure by installing a SPELAB intake manifold, EGR delete, and exhaust on a 2007-2024 6.7 Dodge Ram. Failure PreventionInstallation Guide Avoid Engine Failure: Grid Heater Delete & SPELAB Intake Horn Upgrade Discover how to prevent engine failure with a grid heater delete and SPELAB intake horn upgrade for improved airflow and performance. Failure Prevention Installation Guide Engine Protection Resolve Failing Bolt Issues: SPELAB Intake Horn Install & Grid Heater Delete Watch the installation of a SPELAB intake manifold and grid heater delete, addressing common failing bolt issues that can lead to engine failure. Troubleshooting Guide Installation Guide Engine Repair Fix Failing Bolt: 6.7 Dodge Ram Grid Heater Delete to Prevent Engine Failure Learn to prevent 6.7 Dodge Ram grid heater failing bolt issues and subsequent engine failure with this detailed installation guide. Repair Guide Failure Prevention Boost Performance: Improve Airflow with 6.7 Dodge Ram Upgrades See how installing a grid heater delete, EGR delete, and intake manifold significantly improves airflow and prevents 6.7 Dodge Ram engine issues. Installation Guide Airflow Improvement Compare Performance: Stock vs. SPELAB Intake Horn Join a two-week road trip comparing a stock intake horn with the SPELAB version, alongside truck builds and car shows. Comparison Video Review ×

---tab Description--- Description The Factory Plastic Will Fail. It’s Not a Matter of "If," But "When." If you drive a 6.7L Powerstroke, you are likely driving with a known weak link: the OEM plastic intake manifold and intercooler pipes. Over time, heat cycles and high boost pressure cause these plastic components to crack, warp, or burst completely—often leaving you stranded in "limp mode" while towing or under heavy load. Eliminate the Weak Links with the SPELAB Intake Manifold with Intercooler Pipe Bundle. We have combined our top-tier airflow upgrades into one convenient, high-performance package. By upgrading the manifold and piping simultaneously, you ensure your engine can breathe freely, handle higher boost, and deliver consistent power without the fear of a plastic blowout. Choose Your Level of Protection: Option 1 (Essential Protection): Intake Manifold + Cold Side Pipe. Replaces the two most common failure points. Option 2 (Maximum Performance): Intake Manifold + Full Intercooler Piping (Cold & Hot Side). Replaces the entire airflow loop for maximum flow and thermal efficiency. Fitment 2011–2019 Ford F-250 / F-350 Super Duty 6.7L Powerstroke. 2015–2016 kits include an external oil feed line in the package and require replacing the factory oil feed routing as supplied. Key Features Cast Aluminum ManifoldReplaces the fragile OEM plastic manifold with heat-treated cast aluminum, designed to handle extreme boost pressures without cracking or deforming. 3.5" Mandrel-Bent TubingIncreases airflow volume significantly compared to stock, reducing turbulence and allowing for faster turbo spool-up and lower EGTs (Exhaust Gas Temperatures). Burst-Proof ReliabilityThe included Cold Side Pipe eliminates the notorious factory plastic pipe failure, utilizing polished aluminum and reinforced silicone couplers to ensure you stay on the road. Streamlined Engine BayRemoving the bulky factory components cleans up the engine bay, providing better access for maintenance and a professional, custom appearance. Optimized Flow DynamicsThe manifold features a "bridge" design that distributes air evenly to all cylinders, improving combustion efficiency and throttle response. Leak-Free ConnectionsIncludes heavy-duty 5-ply silicone boots and stainless steel T-bolt clamps that provide a vice-like grip, preventing blown boots even under high-performance tuning conditions. UNLOCK TRUE POTENTIAL: The "Clean Air" Synergy Prevents Carbon Clogging (With EGR Delete):When paired with an EGR Delete, this High-Flow Manifold stays permanently clean. Unlike stock manifolds that get choked by recycled exhaust soot, our aluminum design maintains 100% flow capacity for the life of the truck when the EGR is removed. Shop EGR Delete Kit. Eliminates Oil Sludge (With CCV Reroute):Factory trucks route oily crankcase vapors back into the intake. By adding a CCV Reroute to this bundle, you ensure that your shiny new Intercooler Pipes and Manifold remain free of sticky oil sludge, guaranteeing maximum thermal transfer and airflow efficiency. Shop CCV Delete Kit. The Result:Cleaner Engine + Cooler Air = More Horsepower & Longevity. This bundle is the foundational hardware you need to build a reliable, high-performance 6.7L Powerstroke. Specifications Manifold Material Cast Aluminum Inlet Diameter 3.5 inches Pipe Material Mandrel-Bent Polished Aluminum Coupler Material 5-Ply Reinforced Silicone Clamps Stainless Steel T-Bolt Installation Notice: The Silicone Boot and intake manifold have a tight fit. For easier installation, we suggest putting the clamp on the Silicone Boot first, then attaching the boot to the intake manifold before installing the completed assembly in your vehicle. SPELAB Intake Manifold For 2011-2019 Ford 6.7L Powerstroke ---tab FAQ--- FAQs Q: What is the difference between the "Cold Side" and "Full Kit" options?A: The Cold Side option replaces the pipe going from the intercooler to the engine intake—this is the most critical upgrade as the stock plastic pipe often bursts. The Full Kit adds the Hot Side pipe (Turbo to Intercooler), which replaces the restrictive factory resonator pipe for even better sound and flow. Q: Will this fit my 2017 or 2018 Powerstroke?A: No. While the manifold fits 2011-2019, the intercooler piping layout changed in 2017. This specific bundle is designed for the 2011-2016 model years. Q: Do I have to remove the EGR system to install this manifold?A: Yes. The SPELAB High-Flow Manifold is designed to replace the factory unit and does not have provisions for the factory EGR cooler. An EGR delete kit and appropriate tuning are required. Q: Is it hard to install?A: This is an advanced installation involving fuel lines and turbo piping. We highly recommend having a certified diesel mechanic perform the installation. Q: Why aluminum instead of plastic?A: Aluminum handles heat cycles and boost pressure significantly better than plastic. It won't become brittle over time, ensuring your truck remains reliable for years to come. ---tab Shipping & Returns--- Fast Shipping Policy Your order will be dispatched within 1-2 business days, and the package will arrive within your order's estimated date. Click for Shipping Policy Easy Return Policy Every order comes with a 14-day free return, which means you don't have to pay for a return slip. Click for Return Policy

---tab Description--- Description The SPELAB 6.7L Dodge Ram Intake Manifold/Horn enhances performance for 2007-2024 6.7L Dodge Ram engines with improved airflow and durability. Compatible with our EGR Delete Kit, it offers easy installation and performance whether or not the EGR is deleted. Designed with heating element provisions, you can seal the ports in warm weather or install them in colder conditions. Available in black, silver, and red, it delivers reliable performance and customization for your engine. Key Features Hassle-Free Installation: Designed for a direct fit with stock mounting points, ensuring a hassle-free installation. This upgrade doesn't require any additional tuning or modifications. Enhanced Airflow Design: Featuring a more prominent SPELAB logo, the intake manifold provides increased internal space, improving air intake for better engine performance. Precision Fit: The top cover design is expertly crafted to integrate seamlessly with the SPELAB EGR Plate, ensuring a snug fit and optimized performance. 45-Degree Sensor Port: The manifold includes a new 45-degree angled sensor connector located at the front, allowing for easy access and precise sensor installation. Advanced Stud Design: Our unique stud design extends to the exterior of the intake cylinder block with a sophisticated three-dimensional concave structure, ensuring a secure and efficient installation. Sensor & Boost-Ready: Features four 1/8” NPT threaded ports, easily install boost gauges, sensors, or other performance add-ons. Compact and Efficient: The manifold’s smaller bend angle and near 180-degree parallel alignment reduce airflow restriction, while the lower overall height enhances under-hood clearance and airflow dynamics. Enhanced Airflow with SPELAB for 6.7 Dodge Ram Intake Manifold Upgrade The SPELAB for 6.7 Dodge Ram intake horn is engineered to significantly increase airflow into your engine. It features a larger, unrestricted design compared to the stock intake manifold, allowing for more oxygen-rich air to reach the engine cylinders. This not only improves combustion but also boosts overall performance. In fact, this upgrade delivers an impressive 88% increase in airflow, ensuring that your engine operates at peak efficiency. 2X OEM Diameter For Dodge Ram engine requires substantial airflow, but the restrictive OEM air intake limits performance. SPELAB’s larger, high-flow intake horn—double the size of the OEM—eliminates airflow restrictions and prevents boost loss, allowing for smooth, unrestricted air delivery. Boost Performance and Fuel Efficiency The SPELAB 6.7 Dodge Ram High-Flow Intake Manifold/Trumpet is designed to enhance engine air intake efficiency. Its streamlined, unobstructed structure significantly increases airflow, boosting engine performance. Unlike the factory heat shields, which are prone to carbon buildup and blockage over time, SPELAB’s innovative use of heating elements replaces traditional heating methods, effectively preventing blockages while maintaining optimal performance. This product is the ideal choice for improving engine power and reliability. Specifications Material Cast Aluminum Alloy Weight 4.2 kg (9.26 lbs) Package Dimensions 37 × 27 × 24.5 cm (14.6 × 10.6 × 9.6 inches) Manifold Inlet Size 3-3/8 inch Installation Type Direct Bolt-On (No Modifications Required) Ports Included 4 × 1/8" NPT Threaded Ports Heating Element Included No (Heating element must be purchased separately if needed.) Tuning Requirement Not Required Fuel System Compatibility Fully compatible with OEM fuel lines & emission equipment Heating Element Usage The heating element is optional and only necessary when operating in temperatures below 0°C (32°F). Fitment 6.7 Dodge Ram intake manifold/Horn: 2007-2024 Dodge Ram 2500/3500 6.7L Diesel Intake manifold kit for chassis cab: 2013-2018 Dodge Ram 3500-5500 6.7L Chassis-Cab Only (Also Fits Dual-Alternator Engines) Grid Heater Delete Plate: 2007-2024 Dodge Ram 2500/3500 6.7L Dodge Ram Diesel Installation SPELAB Intake Manifold For 2013-2018 6.7L Dodge Ram ---tab Why SPELAB--- Benefits of Upgrading to SPELAB for 6.7 Dodge Ram Intake Manifold Increased Air Density and Boost Efficiency This for 6.7 Dodge Ram intake manifold upgrade increases air density by improving airflow to the cylinders, leading to more efficient combustion and higher boost efficiency. With its unique design, the SPELAB manifold allows your engine to handle higher boost levels without adding stress to the turbine, ensuring smoother, more reliable performance. This means better performance for towing, off-roading, or high-speed driving. Faster Throttle Response and Better Combustion The SPELAB for 6.7 Dodge Ram intake manifold upgrade also helps deliver faster throttle response by allowing more air into the engine quicker. This provides more immediate power delivery, making your truck feel more responsive and easier to control, whether you're accelerating on the highway or navigating tough off-road conditions. Easy Installation and Compatibility with for 6.7 Dodge Ram Hassle-Free Installation The SPELAB for 6.7 Dodge Ram intake manifold upgrade is designed for a direct fit with stock mounting points, ensuring a hassle-free installation. Compatible with 2007-2024 Dodge Ram 2500/3500 models, this upgrade doesn't require any additional tuning or modifications. The package includes all necessary hardware, such as paper gaskets, washers, bolts, and a proprietary fuel line, ensuring a smooth and seamless installation process. Stock Compatibility This for Dodge Ram intake manifold upgrade is fully compatible with your engine’s existing components, ensuring a seamless fit without requiring any additional modifications. It also comes with a robust 3-3/8 inch inlet and four 1/8 inch NPT ports, allowing for flexible sensor integration and easy customization to suit your specific performance needs. SPELAB Intake Manifold Upgrade Materials and Options Durable Aluminum Alloy Construction The SPELAB for 6.7 Dodge Ram intake manifold is crafted from high-grade aluminum alloy, offering superior durability and heat resistance. This ensures that the manifold can withstand the rigors of high-performance driving while maintaining consistent performance, even under extreme conditions. Finish Options to Match Your Engine Bay Available in three stunning finish options—Red powder-coated, Black, and Raw—the SPELAB for 6.7 Dodge Ram intake manifold upgrade allows you to customize the look of your engine bay while improving performance. Whether you're looking for a sleek, subtle look or something that stands out, SPELAB has the right option for you. Experience the Full Potential of Your for 6.7L Dodge Ram Engine with SPELAB With the SPELAB for 6.7 Dodge Ram intake manifold, you're not just upgrading a component—you're enhancing the entire driving experience. From faster throttle response to improved fuel efficiency, this for Cummins intake manifold upgrade delivers real-world benefits you can feel every time you drive. Unlock the full potential of your Cummins engine and elevate your truck’s performance today. Additionally, the SPELAB for 6.7 Dodge Ram intake manifold/Horn is perfectly compatible with our EGR Delete Kit,CCV Delete Kit,Valve Cover,Oil Catch Can ,Intercooler Pipe Kit and Intercooler further unleashing your engine's potential for superior power output when used together. ---tab FAQ--- FAQs Q: Will I need to retune my engine after installing the SPELAB intake manifold?A: No, the SPELAB for 6.7 Dodge Ram intake manifold upgrade is designed for a direct fit without requiring additional tuning. Q: Is this intake manifold compatible with my 2019 Dodge Ram 2500?A: Yes, the SPELAB for 6.7 Dodge Ram intake manifold is compatible with all Dodge Ram 2500/3500 models from 2007 to 2024. Q: How much horsepower can I expect to gain from this upgrade?A: Depending on your engine’s condition and current modifications, you can expect to see up to 15% more horsepower after installing the SPELAB for 6.7 Dodge Ram intake manifold upgrade. Q: How much HP can you get from an intake manifold upgrade?A: The horsepower gains from an intake manifold upgrade can vary, but typically you can expect an increase of 10-20 HP, depending on the specific design and engine tuning. Q: How can I increase the performance of my for 6.7 Dodge Ram?A: You can increase the performance of your for 6.7 Dodge Ram by upgrading the intake manifold, adding a performance exhaust system, installing a better turbocharger, and tuning the engine for optimal performance. Q: What are the benefits of upgrading the intake manifold?A: Upgrading the intake manifold improves airflow, increases engine efficiency, enhances throttle response, and can lead to better fuel economy and higher horsepower. Q: Is the SPELAB for 6.7 Dodge Ram intake manifold compatible with my stock engine setup?A: Yes, the SPELAB intake manifold is designed to be compatible with stock engine setups for Dodge Ram 2500/3500 models from 2007 to 2024, making installation straightforward without requiring additional modifications. Q: Do I need to tune my engine after upgrading the intake manifold?A: While tuning can further optimize performance, the SPELAB for 6.7 Dodge Ram intake manifold provides noticeable improvements without requiring engine tuning. Q: How does the SPELAB intake manifold improve fuel efficiency?A: The SPELAB intake manifold increases air density and improves combustion efficiency, which can lead to better fuel economy, especially during heavy towing or long-distance driving. Q: Can I install the SPELAB for 6.7 Dodge Ram intake manifold myself?A: Yes, the SPELAB intake manifold comes with a complete installation kit, including hardware and instructions, making it suitable for DIY installation. Q: What material is the SPELAB intake manifold made of?A: The SPELAB for 6.7 Dodge Ram intake manifold is made from high-quality aluminum alloy, offering superior durability and heat resistance. Q: Does upgrading my intake manifold affect other parts of my engine?A: Upgrading your intake manifold enhances airflow and engine performance without negatively affecting other parts. It’s designed to work seamlessly with stock components. Q: How can I tell if the heater bolts are faulty?A: Look for difficulties during cold starts, such as white smoke or unusual noises. Inspect the bolts for cracks, looseness, or signs of corrosion on the surface. Q: How does the SPELAB 6.7L Dodge Ram intake manifold upgrade prevent heater bolt failure?A: The intake manifold optimizes airflow, improves combustion efficiency, and reduces carbon buildup, thereby lowering the risk of heater bolt damage. Q: Is it safe to completely remove the heater bolts?A: In warmer climates, completely removing the heater bolts will not affect engine starting performance. In colder regions, it is recommended to install spiral heaters and optimize the intake system to ensure smooth engine starts during winter. Q: How can I prevent heater bolt breakage?A: Regularly inspect and use high-quality alloy bolts. SPELAB’s delete plate optimization design fundamentally eliminates the issue of bolt detachment. Q: What are the main advantages of the SPELAB modification?A: It eliminates the risk of heater bolt breakage. By combining spiral heaters, the engine will still start smoothly even under cold conditions. Shop 6.7 cummins intake horn with heater and Explore our complete collection of 6.7 Cummins intake manifolds and horns to find the perfect upgrade for your truck. ---tab Blog & Video--- Video Prevent Grid Heater Failure: SPELAB Intake Manifold & Delete Install Learn how to prevent grid heater failure by installing a SPELAB intake manifold, EGR delete, and exhaust on a 6.7 Dodge Ram. Failure PreventionInstallation Guide Avoid Engine Failure: Grid Heater Delete & SPELAB Intake Horn Upgrade Discover how to prevent engine failure with a grid heater delete and SPELAB intake horn upgrade for improved airflow and performance. Failure Prevention Installation Guide Engine Protection Resolve Failing Bolt Issues: SPELAB Intake Horn Install & Grid Heater Delete Watch the installation of a SPELAB intake manifold and grid heater delete, addressing common failing bolt issues that can lead to engine failure. Troubleshooting Guide Installation Guide Engine Repair Fix Failing Bolt: 6.7 Dodge Ram Grid Heater Delete to Prevent Engine Failure Learn to prevent 6.7 Dodge Ram grid heater failing bolt issues and subsequent engine failure with this detailed installation guide. Repair Guide Failure Prevention Boost Performance: Improve Airflow with 6.7 Dodge Ram Upgrades See how installing a grid heater delete, EGR delete, and intake manifold significantly improves airflow and prevents 6.7 Dodge Ram engine issues. Installation Guide Airflow Improvement Compare Performance: Stock vs. SPELAB Intake Horn Join a two-week road trip comparing a stock intake horn with the SPELAB version, alongside truck builds and car shows. Comparison Video Review ×

---tab Description--- Description The SPELAB 6.7L Dodge Ram Intake Manifold/Horn enhances performance for 2007-2024 6.7L Dodge Ram engines with improved airflow and durability. Compatible with our EGR Delete Kit, it offers easy installation and performance whether or not the EGR is deleted. Designed with heating element provisions, you can seal the ports in warm weather or install them in colder conditions. Available in black, silver, and red, it delivers reliable performance and customization for your engine. Key Features Hassle-Free Installation: Designed for a direct fit with stock mounting points, ensuring a hassle-free installation. This upgrade doesn't require any additional tuning or modifications. Enhanced Airflow Design: Featuring a more prominent SPELAB logo, the intake manifold provides increased internal space, improving air intake for better engine performance. Precision Fit: The top cover design is expertly crafted to integrate seamlessly with the SPELAB EGR Plate, ensuring a snug fit and optimized performance. 45-Degree Sensor Port: The manifold includes a new 45-degree angled sensor connector located at the front, allowing for easy access and precise sensor installation. Advanced Stud Design: Our unique stud design extends to the exterior of the intake cylinder block with a sophisticated three-dimensional concave structure, ensuring a secure and efficient installation. Sensor & Boost-Ready: Features four 1/8” NPT threaded ports, easily install boost gauges, sensors, or other performance add-ons. Compact and Efficient: The manifold’s smaller bend angle and near 180-degree parallel alignment reduce airflow restriction, while the lower overall height enhances under-hood clearance and airflow dynamics. Enhanced Airflow with SPELAB for 6.7 Dodge Ram Intake Manifold Upgrade The SPELAB for 6.7 Dodge Ram intake horn is engineered to significantly increase airflow into your engine. It features a larger, unrestricted design compared to the stock intake manifold, allowing for more oxygen-rich air to reach the engine cylinders. This not only improves combustion but also boosts overall performance. In fact, this upgrade delivers an impressive 88% increase in airflow, ensuring that your engine operates at peak efficiency. 2X OEM Diameter For Dodge Ram engine requires substantial airflow, but the restrictive OEM air intake limits performance. SPELAB’s larger, high-flow intake horn—double the size of the OEM—eliminates airflow restrictions and prevents boost loss, allowing for smooth, unrestricted air delivery. Boost Performance and Fuel Efficiency The SPELAB 6.7 Dodge Ram High-Flow Intake Manifold/Trumpet is designed to enhance engine air intake efficiency. Its streamlined, unobstructed structure significantly increases airflow, boosting engine performance. Unlike the factory heat shields, which are prone to carbon buildup and blockage over time, SPELAB’s innovative use of heating elements replaces traditional heating methods, effectively preventing blockages while maintaining optimal performance. This product is the ideal choice for improving engine power and reliability. Specifications Material Cast Aluminum Alloy Weight 4.2 kg (9.26 lbs) Package Dimensions 37 × 27 × 24.5 cm (14.6 × 10.6 × 9.6 inches) Manifold Inlet Size 3-3/8 inch Installation Type Direct Bolt-On (No Modifications Required) Ports Included 4 × 1/8" NPT Threaded Ports Heating Element Included No (Heating element must be purchased separately if needed.) Tuning Requirement Not Required Fuel System Compatibility Fully compatible with OEM fuel lines & emission equipment Heating Element Usage The heating element is optional and only necessary when operating in temperatures below 0°C (32°F). Fitment 6.7 Dodge Ram intake manifold/Horn: 2007-2024 Dodge Ram 2500/3500 6.7L Diesel Intake manifold kit for chassis cab: 2013-2018 Dodge Ram 3500-5500 6.7L Chassis-Cab Only (Also Fits Dual-Alternator Engines) Grid Heater Delete Plate: 2007-2024 Dodge Ram 2500/3500 6.7L Dodge Ram Diesel Installation SPELAB Intake Manifold For 2013-2018 6.7L Dodge Ram ---tab Why SPELAB--- Benefits of Upgrading to SPELAB for 6.7 Dodge Ram Intake Manifold Increased Air Density and Boost Efficiency This for 6.7 Dodge Ram intake manifold upgrade increases air density by improving airflow to the cylinders, leading to more efficient combustion and higher boost efficiency. With its unique design, the SPELAB manifold allows your engine to handle higher boost levels without adding stress to the turbine, ensuring smoother, more reliable performance. This means better performance for towing, off-roading, or high-speed driving. Faster Throttle Response and Better Combustion The SPELAB for 6.7 Dodge Ram intake manifold upgrade also helps deliver faster throttle response by allowing more air into the engine quicker. This provides more immediate power delivery, making your truck feel more responsive and easier to control, whether you're accelerating on the highway or navigating tough off-road conditions. Easy Installation and Compatibility with for 6.7 Dodge Ram Hassle-Free Installation The SPELAB for 6.7 Dodge Ram intake manifold upgrade is designed for a direct fit with stock mounting points, ensuring a hassle-free installation. Compatible with 2007-2024 Dodge Ram 2500/3500 models, this upgrade doesn't require any additional tuning or modifications. The package includes all necessary hardware, such as paper gaskets, washers, bolts, and a proprietary fuel line, ensuring a smooth and seamless installation process. Stock Compatibility This for Dodge Ram intake manifold upgrade is fully compatible with your engine’s existing components, ensuring a seamless fit without requiring any additional modifications. It also comes with a robust 3-3/8 inch inlet and four 1/8 inch NPT ports, allowing for flexible sensor integration and easy customization to suit your specific performance needs. SPELAB Intake Manifold Upgrade Materials and Options Durable Aluminum Alloy Construction The SPELAB for 6.7 Dodge Ram intake manifold is crafted from high-grade aluminum alloy, offering superior durability and heat resistance. This ensures that the manifold can withstand the rigors of high-performance driving while maintaining consistent performance, even under extreme conditions. Finish Options to Match Your Engine Bay Available in three stunning finish options—Red powder-coated, Black, and Raw—the SPELAB for 6.7 Dodge Ram intake manifold upgrade allows you to customize the look of your engine bay while improving performance. Whether you're looking for a sleek, subtle look or something that stands out, SPELAB has the right option for you. Experience the Full Potential of Your for 6.7L Dodge Ram Engine with SPELAB With the SPELAB for 6.7 Dodge Ram intake manifold, you're not just upgrading a component—you're enhancing the entire driving experience. From faster throttle response to improved fuel efficiency, this for Cummins intake manifold upgrade delivers real-world benefits you can feel every time you drive. Unlock the full potential of your Cummins engine and elevate your truck’s performance today. Additionally, the SPELAB for 6.7 Dodge Ram intake manifold/Horn is perfectly compatible with our EGR Delete Kit,CCV Delete Kit,Valve Cover,Oil Catch Can ,Intercooler Pipe Kit and Intercooler further unleashing your engine's potential for superior power output when used together. ---tab FAQ--- FAQs Q: Will I need to retune my engine after installing the SPELAB intake manifold?A: No, the SPELAB for 6.7 Dodge Ram intake manifold upgrade is designed for a direct fit without requiring additional tuning. Q: Is this intake manifold compatible with my 2019 Dodge Ram 2500?A: Yes, the SPELAB for 6.7 Dodge Ram intake manifold is compatible with all Dodge Ram 2500/3500 models from 2007 to 2024. Q: How much horsepower can I expect to gain from this upgrade?A: Depending on your engine’s condition and current modifications, you can expect to see up to 15% more horsepower after installing the SPELAB for 6.7 Dodge Ram intake manifold upgrade. Q: How much HP can you get from an intake manifold upgrade?A: The horsepower gains from an intake manifold upgrade can vary, but typically you can expect an increase of 10-20 HP, depending on the specific design and engine tuning. Q: How can I increase the performance of my for 6.7 Dodge Ram?A: You can increase the performance of your for 6.7 Dodge Ram by upgrading the intake manifold, adding a performance exhaust system, installing a better turbocharger, and tuning the engine for optimal performance. Q: What are the benefits of upgrading the intake manifold?A: Upgrading the intake manifold improves airflow, increases engine efficiency, enhances throttle response, and can lead to better fuel economy and higher horsepower. Q: Is the SPELAB for 6.7 Dodge Ram intake manifold compatible with my stock engine setup?A: Yes, the SPELAB intake manifold is designed to be compatible with stock engine setups for Dodge Ram 2500/3500 models from 2007 to 2024, making installation straightforward without requiring additional modifications. Q: Do I need to tune my engine after upgrading the intake manifold?A: While tuning can further optimize performance, the SPELAB for 6.7 Dodge Ram intake manifold provides noticeable improvements without requiring engine tuning. Q: How does the SPELAB intake manifold improve fuel efficiency?A: The SPELAB intake manifold increases air density and improves combustion efficiency, which can lead to better fuel economy, especially during heavy towing or long-distance driving. Q: Can I install the SPELAB for 6.7 Dodge Ram intake manifold myself?A: Yes, the SPELAB intake manifold comes with a complete installation kit, including hardware and instructions, making it suitable for DIY installation. Q: What material is the SPELAB intake manifold made of?A: The SPELAB for 6.7 Dodge Ram intake manifold is made from high-quality aluminum alloy, offering superior durability and heat resistance. Q: Does upgrading my intake manifold affect other parts of my engine?A: Upgrading your intake manifold enhances airflow and engine performance without negatively affecting other parts. It’s designed to work seamlessly with stock components. Q: How can I tell if the heater bolts are faulty?A: Look for difficulties during cold starts, such as white smoke or unusual noises. Inspect the bolts for cracks, looseness, or signs of corrosion on the surface. Q: How does the SPELAB 6.7L Dodge Ram intake manifold upgrade prevent heater bolt failure?A: The intake manifold optimizes airflow, improves combustion efficiency, and reduces carbon buildup, thereby lowering the risk of heater bolt damage. Q: Is it safe to completely remove the heater bolts?A: In warmer climates, completely removing the heater bolts will not affect engine starting performance. In colder regions, it is recommended to install spiral heaters and optimize the intake system to ensure smooth engine starts during winter. Q: How can I prevent heater bolt breakage?A: Regularly inspect and use high-quality alloy bolts. SPELAB’s delete plate optimization design fundamentally eliminates the issue of bolt detachment. Q: What are the main advantages of the SPELAB modification?A: It eliminates the risk of heater bolt breakage. By combining spiral heaters, the engine will still start smoothly even under cold conditions. Shop 6.7 cummins intake horn with heater and Explore our complete collection of 6.7 Cummins intake manifolds and horns to find the perfect upgrade for your truck. ---tab Blog & Video--- Video Prevent Grid Heater Failure: SPELAB Intake Manifold & Delete Install Learn how to prevent grid heater failure by installing a SPELAB intake manifold, EGR delete, and exhaust on a 6.7 Dodge Ram. Failure PreventionInstallation Guide Avoid Engine Failure: Grid Heater Delete & SPELAB Intake Horn Upgrade Discover how to prevent engine failure with a grid heater delete and SPELAB intake horn upgrade for improved airflow and performance. Failure Prevention Installation Guide Engine Protection Resolve Failing Bolt Issues: SPELAB Intake Horn Install & Grid Heater Delete Watch the installation of a SPELAB intake manifold and grid heater delete, addressing common failing bolt issues that can lead to engine failure. Troubleshooting Guide Installation Guide Engine Repair Fix Failing Bolt: 6.7 Dodge Ram Grid Heater Delete to Prevent Engine Failure Learn to prevent 6.7 Dodge Ram grid heater failing bolt issues and subsequent engine failure with this detailed installation guide. Repair Guide Failure Prevention Boost Performance: Improve Airflow with 6.7 Dodge Ram Upgrades See how installing a grid heater delete, EGR delete, and intake manifold significantly improves airflow and prevents 6.7 Dodge Ram engine issues. Installation Guide Airflow Improvement Compare Performance: Stock vs. SPELAB Intake Horn Join a two-week road trip comparing a stock intake horn with the SPELAB version, alongside truck builds and car shows. Comparison Video Review ×

---tab Description--- Description The SPELAB 6.7L Dodge Ram Intake Manifold/Horn enhances performance for 2007-2024 6.7L Dodge Ram engines with improved airflow and durability. Compatible with our EGR Delete Kit, it offers easy installation and performance whether or not the EGR is deleted. Designed with heating element provisions, you can seal the ports in warm weather or install them in colder conditions. Available in black, silver, and red, it delivers reliable performance and customization for your engine. Key Features Hassle-Free Installation: Designed for a direct fit with stock mounting points, ensuring a hassle-free installation. This upgrade doesn't require any additional tuning or modifications. Enhanced Airflow Design: Featuring a more prominent SPELAB logo, the intake manifold provides increased internal space, improving air intake for better engine performance. Precision Fit: The top cover design is expertly crafted to integrate seamlessly with the SPELAB EGR Plate, ensuring a snug fit and optimized performance. 45-Degree Sensor Port: The manifold includes a new 45-degree angled sensor connector located at the front, allowing for easy access and precise sensor installation. Advanced Stud Design: Our unique stud design extends to the exterior of the intake cylinder block with a sophisticated three-dimensional concave structure, ensuring a secure and efficient installation. Sensor & Boost-Ready: Features four 1/8” NPT threaded ports, easily install boost gauges, sensors, or other performance add-ons. Compact and Efficient: The manifold’s smaller bend angle and near 180-degree parallel alignment reduce airflow restriction, while the lower overall height enhances under-hood clearance and airflow dynamics. Enhanced Airflow with SPELAB for 6.7 Dodge Ram Intake Manifold Upgrade The SPELAB for 6.7 Dodge Ram intake horn is engineered to significantly increase airflow into your engine. It features a larger, unrestricted design compared to the stock intake manifold, allowing for more oxygen-rich air to reach the engine cylinders. This not only improves combustion but also boosts overall performance. In fact, this upgrade delivers an impressive 88% increase in airflow, ensuring that your engine operates at peak efficiency. 2X OEM Diameter For Dodge Ram engine requires substantial airflow, but the restrictive OEM air intake limits performance. SPELAB’s larger, high-flow intake horn—double the size of the OEM—eliminates airflow restrictions and prevents boost loss, allowing for smooth, unrestricted air delivery. Boost Performance and Fuel Efficiency The SPELAB 6.7 Dodge Ram High-Flow Intake Manifold/Trumpet is designed to enhance engine air intake efficiency. Its streamlined, unobstructed structure significantly increases airflow, boosting engine performance. Unlike the factory heat shields, which are prone to carbon buildup and blockage over time, SPELAB’s innovative use of heating elements replaces traditional heating methods, effectively preventing blockages while maintaining optimal performance. This product is the ideal choice for improving engine power and reliability. Specifications Material Cast Aluminum Alloy Weight 4.2 kg (9.26 lbs) Package Dimensions 37 × 27 × 24.5 cm (14.6 × 10.6 × 9.6 inches) Manifold Inlet Size 3-3/8 inch Installation Type Direct Bolt-On (No Modifications Required) Ports Included 4 × 1/8" NPT Threaded Ports Heating Element Included No (Heating element must be purchased separately if needed.) Tuning Requirement Not Required Fuel System Compatibility Fully compatible with OEM fuel lines & emission equipment Heating Element Usage The heating element is optional and only necessary when operating in temperatures below 0°C (32°F). Fitment 6.7 Dodge Ram intake manifold/Horn: 2007-2024 Dodge Ram 2500/3500 6.7L Diesel Intake manifold kit for chassis cab: 2013-2018 Dodge Ram 3500-5500 6.7L Chassis-Cab Only (Also Fits Dual-Alternator Engines) Grid Heater Delete Plate: 2007-2024 Dodge Ram 2500/3500 6.7L Dodge Ram Diesel Installation SPELAB Intake Manifold For 2013-2018 6.7L Dodge Ram ---tab Why SPELAB--- Benefits of Upgrading to SPELAB for 6.7 Dodge Ram Intake Manifold Increased Air Density and Boost Efficiency This for 6.7 Dodge Ram intake manifold upgrade increases air density by improving airflow to the cylinders, leading to more efficient combustion and higher boost efficiency. With its unique design, the SPELAB manifold allows your engine to handle higher boost levels without adding stress to the turbine, ensuring smoother, more reliable performance. This means better performance for towing, off-roading, or high-speed driving. Faster Throttle Response and Better Combustion The SPELAB for 6.7 Dodge Ram intake manifold upgrade also helps deliver faster throttle response by allowing more air into the engine quicker. This provides more immediate power delivery, making your truck feel more responsive and easier to control, whether you're accelerating on the highway or navigating tough off-road conditions. Easy Installation and Compatibility with for 6.7 Dodge Ram Hassle-Free Installation The SPELAB for 6.7 Dodge Ram intake manifold upgrade is designed for a direct fit with stock mounting points, ensuring a hassle-free installation. Compatible with 2007-2024 Dodge Ram 2500/3500 models, this upgrade doesn't require any additional tuning or modifications. The package includes all necessary hardware, such as paper gaskets, washers, bolts, and a proprietary fuel line, ensuring a smooth and seamless installation process. Stock Compatibility This for Dodge Ram intake manifold upgrade is fully compatible with your engine’s existing components, ensuring a seamless fit without requiring any additional modifications. It also comes with a robust 3-3/8 inch inlet and four 1/8 inch NPT ports, allowing for flexible sensor integration and easy customization to suit your specific performance needs. SPELAB Intake Manifold Upgrade Materials and Options Durable Aluminum Alloy Construction The SPELAB for 6.7 Dodge Ram intake manifold is crafted from high-grade aluminum alloy, offering superior durability and heat resistance. This ensures that the manifold can withstand the rigors of high-performance driving while maintaining consistent performance, even under extreme conditions. Finish Options to Match Your Engine Bay Available in three stunning finish options—Red powder-coated, Black, and Raw—the SPELAB for 6.7 Dodge Ram intake manifold upgrade allows you to customize the look of your engine bay while improving performance. Whether you're looking for a sleek, subtle look or something that stands out, SPELAB has the right option for you. Experience the Full Potential of Your for 6.7L Dodge Ram Engine with SPELAB With the SPELAB for 6.7 Dodge Ram intake manifold, you're not just upgrading a component—you're enhancing the entire driving experience. From faster throttle response to improved fuel efficiency, this for Cummins intake manifold upgrade delivers real-world benefits you can feel every time you drive. Unlock the full potential of your Cummins engine and elevate your truck’s performance today. Additionally, the SPELAB for 6.7 Dodge Ram intake manifold/Horn is perfectly compatible with our EGR Delete Kit,CCV Delete Kit,Valve Cover,Oil Catch Can ,Intercooler Pipe Kit and Intercooler further unleashing your engine's potential for superior power output when used together. ---tab FAQ--- FAQs Q: Will I need to retune my engine after installing the SPELAB intake manifold?A: No, the SPELAB for 6.7 Dodge Ram intake manifold upgrade is designed for a direct fit without requiring additional tuning. Q: Is this intake manifold compatible with my 2019 Dodge Ram 2500?A: Yes, the SPELAB for 6.7 Dodge Ram intake manifold is compatible with all Dodge Ram 2500/3500 models from 2007 to 2024. Q: How much horsepower can I expect to gain from this upgrade?A: Depending on your engine’s condition and current modifications, you can expect to see up to 15% more horsepower after installing the SPELAB for 6.7 Dodge Ram intake manifold upgrade. Q: How much HP can you get from an intake manifold upgrade?A: The horsepower gains from an intake manifold upgrade can vary, but typically you can expect an increase of 10-20 HP, depending on the specific design and engine tuning. Q: How can I increase the performance of my for 6.7 Dodge Ram?A: You can increase the performance of your for 6.7 Dodge Ram by upgrading the intake manifold, adding a performance exhaust system, installing a better turbocharger, and tuning the engine for optimal performance. Q: What are the benefits of upgrading the intake manifold?A: Upgrading the intake manifold improves airflow, increases engine efficiency, enhances throttle response, and can lead to better fuel economy and higher horsepower. Q: Is the SPELAB for 6.7 Dodge Ram intake manifold compatible with my stock engine setup?A: Yes, the SPELAB intake manifold is designed to be compatible with stock engine setups for Dodge Ram 2500/3500 models from 2007 to 2024, making installation straightforward without requiring additional modifications. Q: Do I need to tune my engine after upgrading the intake manifold?A: While tuning can further optimize performance, the SPELAB for 6.7 Dodge Ram intake manifold provides noticeable improvements without requiring engine tuning. Q: How does the SPELAB intake manifold improve fuel efficiency?A: The SPELAB intake manifold increases air density and improves combustion efficiency, which can lead to better fuel economy, especially during heavy towing or long-distance driving. Q: Can I install the SPELAB for 6.7 Dodge Ram intake manifold myself?A: Yes, the SPELAB intake manifold comes with a complete installation kit, including hardware and instructions, making it suitable for DIY installation. Q: What material is the SPELAB intake manifold made of?A: The SPELAB for 6.7 Dodge Ram intake manifold is made from high-quality aluminum alloy, offering superior durability and heat resistance. Q: Does upgrading my intake manifold affect other parts of my engine?A: Upgrading your intake manifold enhances airflow and engine performance without negatively affecting other parts. It’s designed to work seamlessly with stock components. Q: How can I tell if the heater bolts are faulty?A: Look for difficulties during cold starts, such as white smoke or unusual noises. Inspect the bolts for cracks, looseness, or signs of corrosion on the surface. Q: How does the SPELAB 6.7L Dodge Ram intake manifold upgrade prevent heater bolt failure?A: The intake manifold optimizes airflow, improves combustion efficiency, and reduces carbon buildup, thereby lowering the risk of heater bolt damage. Q: Is it safe to completely remove the heater bolts?A: In warmer climates, completely removing the heater bolts will not affect engine starting performance. In colder regions, it is recommended to install spiral heaters and optimize the intake system to ensure smooth engine starts during winter. Q: How can I prevent heater bolt breakage?A: Regularly inspect and use high-quality alloy bolts. SPELAB’s delete plate optimization design fundamentally eliminates the issue of bolt detachment. Q: What are the main advantages of the SPELAB modification?A: It eliminates the risk of heater bolt breakage. By combining spiral heaters, the engine will still start smoothly even under cold conditions. Shop 6.7 cummins intake horn with heater and Explore our complete collection of 6.7 Cummins intake manifolds and horns to find the perfect upgrade for your truck. ---tab Blog & Video--- Video Prevent Grid Heater Failure: SPELAB Intake Manifold & Delete Install Learn how to prevent grid heater failure by installing a SPELAB intake manifold, EGR delete, and exhaust on a 6.7 Dodge Ram. Failure PreventionInstallation Guide Avoid Engine Failure: Grid Heater Delete & SPELAB Intake Horn Upgrade Discover how to prevent engine failure with a grid heater delete and SPELAB intake horn upgrade for improved airflow and performance. Failure Prevention Installation Guide Engine Protection Resolve Failing Bolt Issues: SPELAB Intake Horn Install & Grid Heater Delete Watch the installation of a SPELAB intake manifold and grid heater delete, addressing common failing bolt issues that can lead to engine failure. Troubleshooting Guide Installation Guide Engine Repair Fix Failing Bolt: 6.7 Dodge Ram Grid Heater Delete to Prevent Engine Failure Learn to prevent 6.7 Dodge Ram grid heater failing bolt issues and subsequent engine failure with this detailed installation guide. Repair Guide Failure Prevention Boost Performance: Improve Airflow with 6.7 Dodge Ram Upgrades See how installing a grid heater delete, EGR delete, and intake manifold significantly improves airflow and prevents 6.7 Dodge Ram engine issues. Installation Guide Airflow Improvement Compare Performance: Stock vs. SPELAB Intake Horn Join a two-week road trip comparing a stock intake horn with the SPELAB version, alongside truck builds and car shows. Comparison Video Review ×

---tab Description--- Description The SPELAB 2007-2024 6.7L Dodge Ram Intake Manifold/Horn enhances performance for 2007-2024 6.7L Dodge Ram engines with improved airflow and durability. Compatible with our EGR Delete Kit, it offers easy installation and performance whether or not the EGR is deleted. Designed with heating element provisions, you can seal the ports in warm weather or install them in colder conditions. Available in black, silver, and red, it delivers reliable performance and customization for your engine. Key Features Hassle-Free Installation: Designed for a direct fit with stock mounting points, ensuring a hassle-free installation. This upgrade doesn't require any additional tuning or modifications. Enhanced Airflow Design: Featuring a more prominent SPELAB logo, the intake manifold provides increased internal space, improving air intake for better engine performance. Precision Fit: The top cover design is expertly crafted to integrate seamlessly with the SPELAB EGR Plate, ensuring a snug fit and optimized performance. 45-Degree Sensor Port: The manifold includes a new 45-degree angled sensor connector located at the front, allowing for easy access and precise sensor installation. Advanced Stud Design: Our unique stud design extends to the exterior of the intake cylinder block with a sophisticated three-dimensional concave structure, ensuring a secure and efficient installation. Sensor & Boost-Ready: Features four 1/8” NPT threaded ports, easily install boost gauges, sensors, or other performance add-ons. Compact and Efficient: The manifold’s smaller bend angle and near 180-degree parallel alignment reduce airflow restriction, while the lower overall height enhances under-hood clearance and airflow dynamics. Enhanced Airflow with SPELAB 2007-2024 6.7 Dodge Ram Intake Manifold Upgrade The SPELAB 2007-2024 6.7 Dodge Ram intake horn is engineered to significantly increase airflow into your engine. It features a larger, unrestricted design compared to the stock intake manifold, allowing for more oxygen-rich air to reach the engine cylinders. This not only improves combustion but also boosts overall performance. In fact, this upgrade delivers an impressive 88% increase in airflow, ensuring that your engine operates at peak efficiency. 2X OEM Diameter For Dodge Ram engine requires substantial airflow, but the restrictive OEM air intake limits performance. SPELAB’s larger, high-flow intake horn—double the size of the OEM—eliminates airflow restrictions and prevents boost loss, allowing for smooth, unrestricted air delivery. Boost Performance and Fuel Efficiency The SPELAB 2007-2024 6.7 Dodge Ram High-Flow Intake Manifold/Trumpet is designed to enhance engine air intake efficiency. Its streamlined, unobstructed structure significantly increases airflow, boosting engine performance. Unlike the factory heat shields, which are prone to carbon buildup and blockage over time, SPELAB’s innovative use of heating elements replaces traditional heating methods, effectively preventing blockages while maintaining optimal performance. This product is the ideal choice for improving engine power and reliability. Specifications Material Cast Aluminum Alloy Weight 4.2 kg (9.26 lbs) Package Dimensions 37 × 27 × 24.5 cm (14.6 × 10.6 × 9.6 inches) Manifold Inlet Size 3-3/8 inch Installation Type Direct Bolt-On (No Modifications Required) Ports Included 4 × 1/8" NPT Threaded Ports Heating Element Included No (Heating element must be purchased separately if needed.) Tuning Requirement Not Required Fuel System Compatibility Fully compatible with OEM fuel lines & emission equipment Heating Element Usage The heating element is optional and only necessary when operating in temperatures below 0°C (32°F). Fitment 2007-2024 6.7 Dodge Ram intake manifold/Horn: Dodge Ram 2500/3500 6.7L Diesel Intake manifold kit for chassis cab: 2013-2018 Dodge Ram 3500-5500 6.7L Chassis-Cab Only (Also Fits Dual-Alternator Engines) Grid Heater Delete Plate: 2007-2024 Dodge Ram 2500/3500 6.7L Dodge Ram Diesel Installation SPELAB Intake Manifold For 2013-2024 6.7L Dodge Ram ---tab Why SPELAB--- Benefits of Upgrading to SPELAB 2007-2024 6.7 Dodge Ram Intake Manifold Increased Air Density and Boost Efficiency This 2007-2024 6.7 Dodge Ram intake manifold upgrade increases air density by improving airflow to the cylinders, leading to more efficient combustion and higher boost efficiency. With its unique design, the SPELAB manifold allows your engine to handle higher boost levels without adding stress to the turbine, ensuring smoother, more reliable performance. This means better performance for towing, off-roading, or high-speed driving. Faster Throttle Response and Better Combustion The SPELAB 2007-2024 6.7 Dodge Ram intake manifold upgrade also helps deliver faster throttle response by allowing more air into the engine quicker. This provides more immediate power delivery, making your truck feel more responsive and easier to control, whether you're accelerating on the highway or navigating tough off-road conditions. Easy Installation and Compatibility with for 6.7 Dodge Ram Hassle-Free Installation The SPELAB 2007-2024 6.7 Dodge Ram intake manifold upgrade is designed for a direct fit with stock mounting points, ensuring a hassle-free installation. This upgrade doesn't require any additional tuning or modifications. The package includes all necessary hardware, such as paper gaskets, washers, bolts, and a proprietary fuel line, ensuring a smooth and seamless installation process. Stock Compatibility This for Dodge Ram intake manifold upgrade is fully compatible with your engine’s existing components, ensuring a seamless fit without requiring any additional modifications. It also comes with a robust 3-3/8 inch inlet and four 1/8 inch NPT ports, allowing for flexible sensor integration and easy customization to suit your specific performance needs. SPELAB Intake Manifold Upgrade Materials and Options Durable Aluminum Alloy Construction The SPELAB 2007-2024 6.7 Dodge Ram intake manifold is crafted from high-grade aluminum alloy, offering superior durability and heat resistance. This ensures that the manifold can withstand the rigors of high-performance driving while maintaining consistent performance, even under extreme conditions. Finish Options to Match Your Engine Bay Available in three stunning finish options—Red powder-coated, Black, and Raw—the SPELAB for 6.7 Dodge Ram intake manifold upgrade allows you to customize the look of your engine bay while improving performance. Whether you're looking for a sleek, subtle look or something that stands out, SPELAB has the right option for you. Experience the Full Potential of Your 2007-2024 6.7L Dodge Ram Engine with SPELAB With the SPELAB 2007-2024 6.7 Dodge Ram intake manifold, you're not just upgrading a component—you're enhancing the entire driving experience. From faster throttle response to improved fuel efficiency, this for Cummins intake manifold upgrade delivers real-world benefits you can feel every time you drive. Unlock the full potential of your Cummins engine and elevate your truck’s performance today. Additionally, the SPELAB 2007-2024 6.7 Dodge Ram intake manifold/Horn is perfectly compatible with our EGR Delete Kit,CCV Delete Kit,Valve Cover,Oil Catch Can ,Intercooler Pipe Kit and Intercooler further unleashing your engine's potential for superior power output when used together. ---tab FAQ--- FAQs Q: Will I need to retune my engine after installing the SPELAB intake manifold?A: No, the SPELAB 2007-2024 6.7 Dodge Ram intake manifold upgrade is designed for a direct fit without requiring additional tuning. Q: Is this intake manifold compatible with my 2019 Dodge Ram 2500?A: Yes, the SPELAB 2007-2024 6.7 Dodge Ram intake manifold is compatible with all Dodge Ram 2500/3500 models from 2007 to 2024. Q: How much horsepower can I expect to gain from this upgrade?A: Depending on your engine’s condition and current modifications, you can expect to see up to 15% more horsepower after installing the SPELAB 2007-2024 6.7 Dodge Ram intake manifold upgrade. Q: How much HP can you get from an intake manifold upgrade?A: The horsepower gains from an intake manifold upgrade can vary, but typically you can expect an increase of 10-20 HP, depending on the specific design and engine tuning. Q: How can I increase the performance of my for 6.7 Dodge Ram?A: You can increase the performance of your 2007-2024 6.7 Dodge Ram by upgrading the intake manifold, adding a performance exhaust system, installing a better turbocharger, and tuning the engine for optimal performance. Q: What are the benefits of upgrading the intake manifold?A: Upgrading the intake manifold improves airflow, increases engine efficiency, enhances throttle response, and can lead to better fuel economy and higher horsepower. Q: Is the SPELAB 2007-2024 6.7 Dodge Ram intake manifold compatible with my stock engine setup?A: Yes, the SPELAB 2007-2024 intake manifold is designed to be compatible with stock engine setups for Dodge Ram 2500/3500 models from 2007 to 2024, making installation straightforward without requiring additional modifications. Q: Do I need to tune my engine after upgrading the intake manifold?A: While tuning can further optimize performance, the SPELAB 2007-2024 6.7 Dodge Ram intake manifold provides noticeable improvements without requiring engine tuning. Q: How does the SPELAB intake manifold improve fuel efficiency?A: The SPELAB intake manifold increases air density and improves combustion efficiency, which can lead to better fuel economy, especially during heavy towing or long-distance driving. Q: Can I install the SPELAB 2007-2024 6.7 Dodge Ram intake manifold myself?A: Yes, the SPELAB intake manifold comes with a complete installation kit, including hardware and instructions, making it suitable for DIY installation. Q: What material is the SPELAB intake manifold made of?A: The SPELAB 2007-2024 6.7 Dodge Ram intake manifold is made from high-quality aluminum alloy, offering superior durability and heat resistance. Q: Does upgrading my intake manifold affect other parts of my engine?A: Upgrading your intake manifold enhances airflow and engine performance without negatively affecting other parts. It’s designed to work seamlessly with stock components. Q: How can I tell if the heater bolts are faulty?A: Look for difficulties during cold starts, such as white smoke or unusual noises. Inspect the bolts for cracks, looseness, or signs of corrosion on the surface. Q: How does the SPELAB 2007-2024 6.7L Dodge Ram intake manifold upgrade prevent heater bolt failure?A: The intake manifold optimizes airflow, improves combustion efficiency, and reduces carbon buildup, thereby lowering the risk of heater bolt damage. Q: Is it safe to completely remove the heater bolts?A: In warmer climates, completely removing the heater bolts will not affect engine starting performance. In colder regions, it is recommended to install spiral heaters and optimize the intake system to ensure smooth engine starts during winter. Q: How can I prevent heater bolt breakage?A: Regularly inspect and use high-quality alloy bolts. SPELAB’s delete plate optimization design fundamentally eliminates the issue of bolt detachment. Q: What are the main advantages of the SPELAB modification?A: It eliminates the risk of heater bolt breakage. By combining spiral heaters, the engine will still start smoothly even under cold conditions. Shop 6.7 cummins intake horn with heater and Explore our complete collection of 6.7 Cummins intake horn to find the perfect upgrade for your truck. { "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [ { "@type": "Question", "name": "Will I need to retune my engine after installing the SPELAB intake manifold?", "acceptedAnswer": { "@type": "Answer", "text": "No, the SPELAB 2007-2024 6.7 Dodge Ram intake manifold upgrade is designed for a direct fit without requiring additional tuning." } }, { "@type": "Question", "name": "Is this intake manifold compatible with my 2019 Dodge Ram 2500?", "acceptedAnswer": { "@type": "Answer", "text": "Yes, the SPELAB 2007-2024 6.7 Dodge Ram intake manifold is compatible with all Dodge Ram 2500/3500 models from 2007 to 2024." } }, { "@type": "Question", "name": "How much horsepower can I expect to gain from this upgrade?", "acceptedAnswer": { "@type": "Answer", "text": "Depending on your engine’s condition and current modifications, you can expect to see up to 15% more horsepower after installing the SPELAB 2007-2024 6.7 Dodge Ram intake manifold upgrade." } }, { "@type": "Question", "name": "How much HP can you get from an intake manifold upgrade?", "acceptedAnswer": { "@type": "Answer", "text": "The horsepower gains from an intake manifold upgrade can vary, but typically you can expect an increase of 10-20 HP, depending on the specific design and engine tuning." } }, { "@type": "Question", "name": "How can I increase the performance of my 6.7 Dodge Ram?", "acceptedAnswer": { "@type": "Answer", "text": "You can increase the performance of your 2007-2024 6.7 Dodge Ram by upgrading the intake manifold, adding a performance exhaust system, installing a better turbocharger, and tuning the engine for optimal performance." } }, { "@type": "Question", "name": "What are the benefits of upgrading the intake manifold?", "acceptedAnswer": { "@type": "Answer", "text": "Upgrading the intake manifold improves airflow, increases engine efficiency, enhances throttle response, and can lead to better fuel economy and higher horsepower." } }, { "@type": "Question", "name": "Is the SPELAB 2007-2024 6.7 Dodge Ram intake manifold compatible with my stock engine setup?", "acceptedAnswer": { "@type": "Answer", "text": "Yes, the SPELAB 2007-2024 intake manifold is designed to be compatible with stock engine setups for Dodge Ram 2500/3500 models from 2007 to 2024, making installation straightforward without requiring additional modifications." } }, { "@type": "Question", "name": "Do I need to tune my engine after upgrading the intake manifold?", "acceptedAnswer": { "@type": "Answer", "text": "While tuning can further optimize performance, the SPELAB 2007-2024 6.7 Dodge Ram intake manifold provides noticeable improvements without requiring engine tuning." } }, { "@type": "Question", "name": "How does the SPELAB intake manifold improve fuel efficiency?", "acceptedAnswer": { "@type": "Answer", "text": "The SPELAB intake manifold increases air density and improves combustion efficiency, which can lead to better fuel economy, especially during heavy towing or long-distance driving." } }, { "@type": "Question", "name": "Can I install the SPELAB 2007-2024 6.7 Dodge Ram intake manifold myself?", "acceptedAnswer": { "@type": "Answer", "text": "Yes, the SPELAB intake manifold comes with a complete installation kit, including hardware and instructions, making it suitable for DIY installation." } }, { "@type": "Question", "name": "What material is the SPELAB intake manifold made of?", "acceptedAnswer": { "@type": "Answer", "text": "The SPELAB 2007-2024 6.7 Dodge Ram intake manifold is made from high-quality aluminum alloy, offering superior durability and heat resistance." } }, { "@type": "Question", "name": "Does upgrading my intake manifold affect other parts of my engine?", "acceptedAnswer": { "@type": "Answer", "text": "Upgrading your intake manifold enhances airflow and engine performance without negatively affecting other parts. It’s designed to work seamlessly with stock components." } }, { "@type": "Question", "name": "How can I tell if the heater bolts are faulty?", "acceptedAnswer": { "@type": "Answer", "text": "Look for difficulties during cold starts, such as white smoke or unusual noises. Inspect the bolts for cracks, looseness, or signs of corrosion on the surface." } }, { "@type": "Question", "name": "How does the SPELAB 2007-2024 6.7L Dodge Ram intake manifold upgrade prevent heater bolt failure?", "acceptedAnswer": { "@type": "Answer", "text": "The intake manifold optimizes airflow, improves combustion efficiency, and reduces carbon buildup, thereby lowering the risk of heater bolt damage." } }, { "@type": "Question", "name": "Is it safe to completely remove the heater bolts?", "acceptedAnswer": { "@type": "Answer", "text": "In warmer climates, completely removing the heater bolts will not affect engine starting performance. In colder regions, it is recommended to install spiral heaters and optimize the intake system to ensure smooth engine starts during winter." } }, { "@type": "Question", "name": "How can I prevent heater bolt breakage?", "acceptedAnswer": { "@type": "Answer", "text": "Regularly inspect and use high-quality alloy bolts. SPELAB’s delete plate optimization design fundamentally eliminates the issue of bolt detachment." } }, { "@type": "Question", "name": "What are the main advantages of the SPELAB modification?", "acceptedAnswer": { "@type": "Answer", "text": "It eliminates the risk of heater bolt breakage. By combining spiral heaters, the engine will still start smoothly even under cold conditions." } } ] } ---tab Blog & Video--- Video Prevent Grid Heater Failure: SPELAB Intake Manifold & Delete Install Learn how to prevent grid heater failure by installing a SPELAB intake manifold, EGR delete, and exhaust on a 2007-2024 6.7 Dodge Ram. Failure PreventionInstallation Guide Avoid Engine Failure: Grid Heater Delete & SPELAB Intake Horn Upgrade Discover how to prevent engine failure with a grid heater delete and SPELAB intake horn upgrade for improved airflow and performance. Failure Prevention Installation Guide Engine Protection Resolve Failing Bolt Issues: SPELAB Intake Horn Install & Grid Heater Delete Watch the installation of a SPELAB intake manifold and grid heater delete, addressing common failing bolt issues that can lead to engine failure. Troubleshooting Guide Installation Guide Engine Repair Fix Failing Bolt: 6.7 Dodge Ram Grid Heater Delete to Prevent Engine Failure Learn to prevent 6.7 Dodge Ram grid heater failing bolt issues and subsequent engine failure with this detailed installation guide. Repair Guide Failure Prevention Boost Performance: Improve Airflow with 6.7 Dodge Ram Upgrades See how installing a grid heater delete, EGR delete, and intake manifold significantly improves airflow and prevents 6.7 Dodge Ram engine issues. Installation Guide Airflow Improvement Compare Performance: Stock vs. SPELAB Intake Horn Join a two-week road trip comparing a stock intake horn with the SPELAB version, alongside truck builds and car shows. Comparison Video Review ×

---tab Description--- Description The SPELAB 6.7L Dodge Ram Intake Manifold/Horn enhances performance for 2007-2024 6.7L Dodge Ram engines with improved airflow and durability. Compatible with our EGR Delete Kit, it offers easy installation and performance whether or not the EGR is deleted. Designed with heating element provisions, you can seal the ports in warm weather or install them in colder conditions. Available in black, silver, and red, it delivers reliable performance and customization for your engine. Key Features Hassle-Free Installation: Designed for a direct fit with stock mounting points, ensuring a hassle-free installation. This upgrade doesn't require any additional tuning or modifications. Enhanced Airflow Design: Featuring a more prominent SPELAB logo, the intake manifold provides increased internal space, improving air intake for better engine performance. Precision Fit: The top cover design is expertly crafted to integrate seamlessly with the SPELAB EGR Plate, ensuring a snug fit and optimized performance. 45-Degree Sensor Port: The manifold includes a new 45-degree angled sensor connector located at the front, allowing for easy access and precise sensor installation. Advanced Stud Design: Our unique stud design extends to the exterior of the intake cylinder block with a sophisticated three-dimensional concave structure, ensuring a secure and efficient installation. Sensor & Boost-Ready: Features four 1/8” NPT threaded ports, easily install boost gauges, sensors, or other performance add-ons. Compact and Efficient: The manifold’s smaller bend angle and near 180-degree parallel alignment reduce airflow restriction, while the lower overall height enhances under-hood clearance and airflow dynamics. Enhanced Airflow with SPELAB for 6.7 Dodge Ram Intake Manifold Upgrade The SPELAB for 6.7 Dodge Ram intake horn is engineered to significantly increase airflow into your engine. It features a larger, unrestricted design compared to the stock intake manifold, allowing for more oxygen-rich air to reach the engine cylinders. This not only improves combustion but also boosts overall performance. In fact, this upgrade delivers an impressive 88% increase in airflow, ensuring that your engine operates at peak efficiency. 2X OEM Diameter For Dodge Ram engine requires substantial airflow, but the restrictive OEM air intake limits performance. SPELAB’s larger, high-flow intake horn—double the size of the OEM—eliminates airflow restrictions and prevents boost loss, allowing for smooth, unrestricted air delivery. Boost Performance and Fuel Efficiency The SPELAB 6.7 Dodge Ram High-Flow Intake Manifold/Trumpet is designed to enhance engine air intake efficiency. Its streamlined, unobstructed structure significantly increases airflow, boosting engine performance. Unlike the factory heat shields, which are prone to carbon buildup and blockage over time, SPELAB’s innovative use of heating elements replaces traditional heating methods, effectively preventing blockages while maintaining optimal performance. This product is the ideal choice for improving engine power and reliability. Specifications Material Cast Aluminum Alloy Weight 4.2 kg (9.26 lbs) Package Dimensions 37 × 27 × 24.5 cm (14.6 × 10.6 × 9.6 inches) Manifold Inlet Size 3-3/8 inch Installation Type Direct Bolt-On (No Modifications Required) Ports Included 4 × 1/8" NPT Threaded Ports Heating Element Included No (Heating element must be purchased separately if needed.) Tuning Requirement Not Required Fuel System Compatibility Fully compatible with OEM fuel lines & emission equipment Heating Element Usage The heating element is optional and only necessary when operating in temperatures below 0°C (32°F). Fitment 6.7 Dodge Ram intake manifold/Horn: 2007-2024 Dodge Ram 2500/3500 6.7L Diesel Intake manifold kit for chassis cab: 2013-2018 Dodge Ram 3500-5500 6.7L Chassis-Cab Only (Also Fits Dual-Alternator Engines) Grid Heater Delete Plate: 2007-2024 Dodge Ram 2500/3500 6.7L Dodge Ram Diesel Installation SPELAB Intake Manifold For 2013-2018 6.7L Dodge Ram ---tab Why SPELAB--- Benefits of Upgrading to SPELAB for 6.7 Dodge Ram Intake Manifold Increased Air Density and Boost Efficiency This for 6.7 Dodge Ram intake manifold upgrade increases air density by improving airflow to the cylinders, leading to more efficient combustion and higher boost efficiency. With its unique design, the SPELAB manifold allows your engine to handle higher boost levels without adding stress to the turbine, ensuring smoother, more reliable performance. This means better performance for towing, off-roading, or high-speed driving. Faster Throttle Response and Better Combustion The SPELAB for 6.7 Dodge Ram intake manifold upgrade also helps deliver faster throttle response by allowing more air into the engine quicker. This provides more immediate power delivery, making your truck feel more responsive and easier to control, whether you're accelerating on the highway or navigating tough off-road conditions. Easy Installation and Compatibility with for 6.7 Dodge Ram Hassle-Free Installation The SPELAB for 6.7 Dodge Ram intake manifold upgrade is designed for a direct fit with stock mounting points, ensuring a hassle-free installation. Compatible with 2007-2024 Dodge Ram 2500/3500 models, this upgrade doesn't require any additional tuning or modifications. The package includes all necessary hardware, such as paper gaskets, washers, bolts, and a proprietary fuel line, ensuring a smooth and seamless installation process. Stock Compatibility This for Dodge Ram intake manifold upgrade is fully compatible with your engine’s existing components, ensuring a seamless fit without requiring any additional modifications. It also comes with a robust 3-3/8 inch inlet and four 1/8 inch NPT ports, allowing for flexible sensor integration and easy customization to suit your specific performance needs. SPELAB Intake Manifold Upgrade Materials and Options Durable Aluminum Alloy Construction The SPELAB for 6.7 Dodge Ram intake manifold is crafted from high-grade aluminum alloy, offering superior durability and heat resistance. This ensures that the manifold can withstand the rigors of high-performance driving while maintaining consistent performance, even under extreme conditions. Finish Options to Match Your Engine Bay Available in three stunning finish options—Red powder-coated, Black, and Raw—the SPELAB for 6.7 Dodge Ram intake manifold upgrade allows you to customize the look of your engine bay while improving performance. Whether you're looking for a sleek, subtle look or something that stands out, SPELAB has the right option for you. Experience the Full Potential of Your for 6.7L Dodge Ram Engine with SPELAB With the SPELAB for 6.7 Dodge Ram intake manifold, you're not just upgrading a component—you're enhancing the entire driving experience. From faster throttle response to improved fuel efficiency, this for Cummins intake manifold upgrade delivers real-world benefits you can feel every time you drive. Unlock the full potential of your Cummins engine and elevate your truck’s performance today. Additionally, the SPELAB for 6.7 Dodge Ram intake manifold/Horn is perfectly compatible with our EGR Delete Kit,CCV Delete Kit,Valve Cover,Oil Catch Can ,Intercooler Pipe Kit and Intercooler further unleashing your engine's potential for superior power output when used together. ---tab FAQ--- FAQs Q: Will I need to retune my engine after installing the SPELAB intake manifold?A: No, the SPELAB for 6.7 Dodge Ram intake manifold upgrade is designed for a direct fit without requiring additional tuning. Q: Is this intake manifold compatible with my 2019 Dodge Ram 2500?A: Yes, the SPELAB for 6.7 Dodge Ram intake manifold is compatible with all Dodge Ram 2500/3500 models from 2007 to 2024. Q: How much horsepower can I expect to gain from this upgrade?A: Depending on your engine’s condition and current modifications, you can expect to see up to 15% more horsepower after installing the SPELAB for 6.7 Dodge Ram intake manifold upgrade. Q: How much HP can you get from an intake manifold upgrade?A: The horsepower gains from an intake manifold upgrade can vary, but typically you can expect an increase of 10-20 HP, depending on the specific design and engine tuning. Q: How can I increase the performance of my for 6.7 Dodge Ram?A: You can increase the performance of your for 6.7 Dodge Ram by upgrading the intake manifold, adding a performance exhaust system, installing a better turbocharger, and tuning the engine for optimal performance. Q: What are the benefits of upgrading the intake manifold?A: Upgrading the intake manifold improves airflow, increases engine efficiency, enhances throttle response, and can lead to better fuel economy and higher horsepower. Q: Is the SPELAB for 6.7 Dodge Ram intake manifold compatible with my stock engine setup?A: Yes, the SPELAB intake manifold is designed to be compatible with stock engine setups for Dodge Ram 2500/3500 models from 2007 to 2024, making installation straightforward without requiring additional modifications. Q: Do I need to tune my engine after upgrading the intake manifold?A: While tuning can further optimize performance, the SPELAB for 6.7 Dodge Ram intake manifold provides noticeable improvements without requiring engine tuning. Q: How does the SPELAB intake manifold improve fuel efficiency?A: The SPELAB intake manifold increases air density and improves combustion efficiency, which can lead to better fuel economy, especially during heavy towing or long-distance driving. Q: Can I install the SPELAB for 6.7 Dodge Ram intake manifold myself?A: Yes, the SPELAB intake manifold comes with a complete installation kit, including hardware and instructions, making it suitable for DIY installation. Q: What material is the SPELAB intake manifold made of?A: The SPELAB for 6.7 Dodge Ram intake manifold is made from high-quality aluminum alloy, offering superior durability and heat resistance. Q: Does upgrading my intake manifold affect other parts of my engine?A: Upgrading your intake manifold enhances airflow and engine performance without negatively affecting other parts. It’s designed to work seamlessly with stock components. Q: How can I tell if the heater bolts are faulty?A: Look for difficulties during cold starts, such as white smoke or unusual noises. Inspect the bolts for cracks, looseness, or signs of corrosion on the surface. Q: How does the SPELAB 6.7L Dodge Ram intake manifold upgrade prevent heater bolt failure?A: The intake manifold optimizes airflow, improves combustion efficiency, and reduces carbon buildup, thereby lowering the risk of heater bolt damage. Q: Is it safe to completely remove the heater bolts?A: In warmer climates, completely removing the heater bolts will not affect engine starting performance. In colder regions, it is recommended to install spiral heaters and optimize the intake system to ensure smooth engine starts during winter. Q: How can I prevent heater bolt breakage?A: Regularly inspect and use high-quality alloy bolts. SPELAB’s delete plate optimization design fundamentally eliminates the issue of bolt detachment. Q: What are the main advantages of the SPELAB modification?A: It eliminates the risk of heater bolt breakage. By combining spiral heaters, the engine will still start smoothly even under cold conditions. Shop 6.7 cummins intake horn with heater and Explore our complete collection of 6.7 Cummins intake manifolds and horns to find the perfect upgrade for your truck. ---tab Blog & Video--- Video Prevent Grid Heater Failure: SPELAB Intake Manifold & Delete Install Learn how to prevent grid heater failure by installing a SPELAB intake manifold, EGR delete, and exhaust on a 6.7 Dodge Ram. Failure PreventionInstallation Guide Avoid Engine Failure: Grid Heater Delete & SPELAB Intake Horn Upgrade Discover how to prevent engine failure with a grid heater delete and SPELAB intake horn upgrade for improved airflow and performance. Failure Prevention Installation Guide Engine Protection Resolve Failing Bolt Issues: SPELAB Intake Horn Install & Grid Heater Delete Watch the installation of a SPELAB intake manifold and grid heater delete, addressing common failing bolt issues that can lead to engine failure. Troubleshooting Guide Installation Guide Engine Repair Fix Failing Bolt: 6.7 Dodge Ram Grid Heater Delete to Prevent Engine Failure Learn to prevent 6.7 Dodge Ram grid heater failing bolt issues and subsequent engine failure with this detailed installation guide. Repair Guide Failure Prevention Boost Performance: Improve Airflow with 6.7 Dodge Ram Upgrades See how installing a grid heater delete, EGR delete, and intake manifold significantly improves airflow and prevents 6.7 Dodge Ram engine issues. Installation Guide Airflow Improvement Compare Performance: Stock vs. SPELAB Intake Horn Join a two-week road trip comparing a stock intake horn with the SPELAB version, alongside truck builds and car shows. Comparison Video Review ×